ATI Amplifiers AT2004 and AT1502 - Socal

0 Members and 1 Guest are viewing this topic. Read 2162 times.

aboroth00

ATI Amplifiers AT2004 and AT1502 - Socal
« on: 25 Jan 2016, 03:15 am »
I have two ATI amps up for sale. They're rock solid, built in the USA amps which I'm only selling because I'm moving toward an amp in a single chassis.

The AT2004 is a 4 channel, fully balanced in and out and is not just balanced connections jumpered to the RCA's. The amp is rated for 200 watts/8 ohms and 300 watts/4 ohm. Great sounding amp with plenty of power to boot. The amp drove my Revel Ultimas perfectly and blew away the XPA-200 I compared it to which I use in my computer setup. Absolutely no contest, night and day difference. The amp was purchased from the original installer and is in excellent shape.

The AT1502 is a 2 channel amp 150 watts/8ohms and 225 watts/4ohms bridgable to 450 watts/8 ohms. Great amp I used for my surround speakers. Also in great condition with one caveat, the power light tends to blink which is a common occurence for this series.

All ATI amps I've owned which is ~10 amps have performed impeccably without issue and I have used them to drive very difficult speakers, i.e. Infinity Kappa 9 which dips to below 1 ohm <100hz which is known to short amps. No problems for ATI amps. ATI is still located in Los Angeles so if there is any issues there's support.

Asking 1000 for the AT2004 and 300 for the AT1502. Pick up only in 92121 for the time being, but am open to shipping













aboroth00

Re: ATI Amplifiers AT2004 and AT1502 - Socal
« Reply #1 on: 24 Feb 2016, 08:01 pm »
The AT2004 has been sold.  Price drop for the 1502 to 250$.

JoshK

Re: ATI Amplifiers AT2004 and AT1502 - Socal
« Reply #2 on: 25 Feb 2016, 12:26 am »
Just a tiny nudge.  Not affiliated in any way with the seller but love ATI amps.   I have come full circle and own a couple of the big ones.   I recently sold a nearly 20 year old 1504.  The buyer was someone I know fairly well and he asked me to go over it.   I measured the DC offset on the binding posts and it was basically immeasurable.  That after 20 years.  The bias was spot on *i think* or atleast it was consistent channel to channel.   Morris Kessler builts amps to last and nearly bullet proof.  Seriously underrated value, IMO. 

aboroth00

Re: ATI Amplifiers AT2004 and AT1502 - Socal
« Reply #3 on: 25 Feb 2016, 12:40 am »
Seriously underrated is spot on!  That's how I was able to afford these guys!  I too love these amps and had plenty including the 1504 for a short duration.  Never had an issue whatsoever with any of the ATI amps and they go strong for years of loyal service!