OB H-Frame / A370PEQ / HX800 amp Box Flat Packs / Finished Cabs

0 Members and 1 Guest are viewing this topic. Read 124083 times.

Captainhemo

Re: OB H-Frame / A370PEQ / HX800 amp Box Flat Packs / Finished Cabs
« Reply #600 on: 14 Oct 2020, 05:15 pm »
What size clamps? How many?  And what brand of glue?

Ok,  for a minimum glue up  4 18" clamps for duals and   6 if   they are  the triples  but remember,  that is bare minimum...     more is always nice as you can add them to  other  places.....    The dowels in the base  / top / side panels take  care of the   alignment,  so  really, you  only  NEED to clamp across the braces to  squeeze the  cabinet together and  from front  brace to rear brace to  keep them   up against the baffle.   

In Peter's video, you'll see I recommended   assembling them  upside down and not to glued the top on  during the first step, it is actually  done last....   instead,  you  want to glue the  baffle, side panels, and braces  using the top as a  jig. Then   the base  to the   exposed   end facing up using the  4 dowels  for alignment.  The base has  4  counter sunk  screws so no  clamps required here.

Once the glue sets  up, unclamp and flip the cabinet over (right side up).  Now  knock the unglued top off   and  glue it  down  using the   4 clamps  (they'll clamp  from the top to the  braces) ...  I'd use a  small piece ctive piece of scrap between the clamps  and face of  cabinet top.

Titebond glue will be fine,  or,    get the Titebond Extends  if you  want a bit of extra  open (work) time

jay

DA

Does anyone know of someone near Eastern Iowa area that runs a pair of the GR open baffle subwoofers?
Thanks

Don

tom739

  • Jr. Member
  • Posts: 15
Hi everyone,
Just wanted to say thanks to Jay for my new sub cabinets. I ordered a pair of dual 12 open baffle subs. Very high quality work, and excellent shipping and packaging. No damage.

Tom

Captainhemo

Thanks Tom, appreciate the feedback.

We send out Tom's pair all glued up with preinstalled magnets in the cabs and grill frames.   Fairly well prepped so  only  minor  work required  before   finishing at  your  end. Boxes end up being  larger so  there is an higher shipping cost involved but,  it is an additional service  we can provide.

jay
« Last Edit: 9 Nov 2020, 09:29 pm by Captainhemo »

cfdrake

  • Newbie
  • Posts: 2
Re: OB H-Frame / A370PEQ / HX800 amp Box Flat Packs / Finished Cabs
« Reply #604 on: 21 Nov 2020, 06:52 pm »
Hi - just checking in to see what shipping / lead time is currently looking like?  Am planning on a pair of doubles to go with my Magnepan 3.7i. 

Thank you!

CD

Captainhemo

Re: OB H-Frame / A370PEQ / HX800 amp Box Flat Packs / Finished Cabs
« Reply #605 on: 22 Nov 2020, 10:01 pm »
We currently  have  quite a list of folks waiting on a variety of cabinets.  We are  trying to get  through them  as  fast  as we can ....
Best   thing to do is get  your  name  in  our  "queue" by  emailing me at captainhemo at  shaw.ca.....  we're  trying to  fill  orders  in  the  order that  they were  received


jay
« Last Edit: 23 Nov 2020, 06:47 pm by Captainhemo »