0 Members and 2 Guests are viewing this topic. Read 74776 times.
I'm thinking I like fast roll-off. Crisp & clean. Doesn't linger
Raka arrived today. no smell. I'm going to do this indoors.
I would also recommend moving the subs towards the inside. My Mini Stratas sounded a lot better spread out and toed in.https://flic.kr/p/RZG1fd
The epoxy won't cure in cold temps. 6oF is min. but it will take a long time to cure. I don't like to use epoxy below 75F. To help accelerate cure, pre-warm the MDF boxes with a portable heater, and put your jugs of epoxy/hardener in a pan of hot water to raise the temp of the epoxy. It will flow easier. Don't do any sanding indoors, especially before epoxy is fully cured which takes a week or more (depending on temp). You don't want uncured epoxy dust in your lungs!
Page created in 0.048 seconds with 29 queries.