[LP1]

I recently had my new horns installed in my dedicated room and a few tests revealed that the room is desperately in need of absorption from 100Hz-2000Khz. Below is the et60 time for the room. As you can see, it's in excess of 600. I'd like to bring it down to approximately 250.

Accordingly, I plan to initially order a combination of 244 and Monster Bass Trap panels. My room is approximately 18 x 30 x 9.5. Everything below 90Hz will be controlled by my Crown dsp amp, but I'm still interested in treating the room at those frequencies.

I am seeking recommendations for the number of panels I should start with and whether some/all of them should have a scatter plate.

Thanks.

[Glenn Kuras]

Sorry about the wait on this.  I would recommend you email use some pictures and other info about the room so we can come up with a plan for you. You really can't use a RT60 equation for smaller rooms. That is used for LARGE rooms.
See the following link that will give use most of the information we need on your room.
http://www.gikacoustics.com/acoustic-advice/

[J-Pak]

Sorry about the wait on this.  I would recommend you email use some pictures and other info about the room so we can come up with a plan for you. You really can't use a RT60 equation for smaller rooms. That is used for LARGE rooms.
See the following link that will give use most of the information we need on your room.
http://www.gikacoustics.com/acoustic-advice/

Sorry to bump an old thread, but thought I would ask- what room size does it take for RT60 to start to be meaningful? Cheers