Cable clamps, reuseable and highly recommended by Wayner

Wayner · « **on:** 16 Dec 2009, 10:12 pm »

Every once in a while, there comes along a nifty product that is reasonably priced and does what the manufacturer says it does. This is a re-usable cable clamp that will gather and separate your line level cables and power cables, just to help keep them organized. They are great! I use them everywhere. I thought you guys might like them too. www.cableclamp.com

Wayner

avahifi · « **Reply #1 on:** 16 Dec 2009, 10:13 pm »

Hi Wayne,

Do you have a web link to these cable clamps?

Frank

Wayner · « **Reply #2 on:** 16 Dec 2009, 10:15 pm »

Just put it up Frank.

Wayner

Big Red Machine · « **Reply #3 on:** 16 Dec 2009, 11:12 pm »

They sell these in Home Depot in orange. I have about 20 of them in all sizes.

Pez · « **Reply #4 on:** 16 Dec 2009, 11:13 pm »

Now those are nifty!

Big Red Machine · « **Reply #5 on:** 17 Dec 2009, 01:14 am »

Here are 3 different sizes on a CD case:

decal · « **Reply #6 on:** 17 Dec 2009, 01:30 am »

Nice looking,but how do they sound !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

satfrat · « **Reply #7 on:** 17 Dec 2009, 01:42 am »

Other than painting a prettier picture behind one's gear, I see nothing positive to be gained from bundling cables together myself. The only product I've ever seen as being useful myself are sparkplug cable seperaters or any designed product that keeps the cables orderly seperated. JMHO,YMMV.

Cheers,
Robin

turkey · « **Reply #8 on:** 17 Dec 2009, 01:56 pm »

Quote from: satfrat on 17 Dec 2009, 01:42 am

Other than painting a prettier picture behind one's gear, I see nothing positive to be gained from bundling cables together myself. The only product I've ever seen as being useful myself are sparkplug cable seperaters or any designed product that keeps the cables orderly seperated. JMHO,YMMV.

Cheers,
Robin

I've been able to bundle my cables so that signal cables run along one side and power cords on the other side.

I just use velcro tape though.

Big Red Machine · « **Reply #9 on:** 17 Dec 2009, 03:00 pm »

Ah, what I use them for mainly is storing all the extra cables I have, which are many.

I do group power wires together up the center trunk of my HT rack, for instance and run all signal cables right to left. So I use these for groups like speaker wires (7 for the HT rack) and some signals to a multichannel amp.

For wire separation I use slices of pool noodles. Hot pink!

Listens2tubes · « **Reply #10 on:** 18 Dec 2009, 06:07 pm »

These look great! I will get them for an audio pal whose power cords over run his setup, very unsightly.

Thanks Wayne

persisting1 · « **Reply #11 on:** 18 Dec 2009, 06:20 pm »

Wayner,

Keep up the good work. You sure have your finger on the pulse of the inexpensive tweaks

Norman Tracy · « **Reply #12 on:** 18 Dec 2009, 09:23 pm »

Robin commented:
"Other than painting a prettier picture behind one's gear, I see nothing positive to be gained from bundling cables together myself. The only product I've ever seen as being useful myself are sparkplug cable seperaters or any designed product that keeps the cables orderly seperated. JMHO,YMMV."

For simple systems, yes. But YMMV indeed as seen below.

trebejo · « **Reply #13 on:** 18 Dec 2009, 10:27 pm »

Norman... ¡Ay Mama Inez!

Well, at least you won't have any trouble making sure that all the cables cross perpendicular to each other.

satfrat · « **Reply #14 on:** 18 Dec 2009, 10:41 pm »

Quote from: Norman Tracy on 18 Dec 2009, 09:23 pm

Robin commented:
"Other than painting a prettier picture behind one's gear, I see nothing positive to be gained from bundling cables together myself. The only product I've ever seen as being useful myself are sparkplug cable seperaters or any designed product that keeps the cables orderly seperated. JMHO,YMMV."

For simple systems, yes. But YMMV indeed as seen below.

Wish I had a camera Norm as I can easily top that with my cable extravaganza generated from 24 components in my A/V system and all gathered in a 5' area between my loudspeakers. I'm waay past the point of even trying to organize anything myself as I'd personally rather have this type of mess than to bundle cable together. I can only attempt to keep signal cables away from power cables the best I can. It's no wonder with my mess that I'm so high on power conditioning and EMI/RF interference control. But thanks for reminding me that I'm not alone and seperating cables can get to be an impossible task as systems grow.

Cheers,
Robin

SET Man · « **Reply #15 on:** 18 Dec 2009, 11:00 pm »

Quote from: decal on 17 Dec 2009, 01:30 am

Nice looking,but how do they sound !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hey!

I'm sure the "Audiophile Version" is coming with 100X the price.

Anyway, that's neat, sure beat the plastic ties.

Take care,
Buddy