[Scott F.]

Ah, I'd been wanting to clean the freezer anyway....   Needed to make room for some relatives....hehehe.

Just make sure you remove their fingerprints and teeth so nobody can identify the bodies.....



....I guess I've been watching too much CSI ...... at least its in Hi-Def 



Glad to hear that everybody has power again. Just in time for the 95^o heat we've got for the rest of the week.

[subway]

Wow,

I feal really bad now.  I did not loose any electricity at all even though we had lightning hit our apt. building dead on.  PHEWW. 

Anyway, glad to hear that people are getting their electricity back and getting back to normal,  I hope to meet everyone soon, or atleast at electric bears over the hill party.

Talk at you all later

[drummerwill]

   Steve now that you have power, and if its not Hot enough for ya ! You could always
     fire up them 845's and the Insignias!

    Any questions...I'm in the book

    Have fun!
     Willie

[steve k]

Willie,
Mark and I will be trying that Friday. So what's the sequence to fire these up? I know Sturg said to keep the bias around 80ma.
s.

[drummerwill]

 
 Start up is pretty simple ! The volume control up front full left is No Volume start there. 2 switchs on the front ( On the far right Main power will light all filaments wait 30 sec) then turn on second switch ( thats the DC power on).
   On the back of the amps are 3 potentiometer the 2 without knobs are Hum adjust pots ( 1 for the VT-52 and one for the 845 ) the 845 hum pot is usually the only one you may want to tweak. The other pot has knob either Round or a Chicken head Knob, thats the bias adjust. Like Sturgus said about 80 ma is good.
   Any problems I'm in the phone book under Rivers Jr.
     Have fun!
     Willie