Poll

Who built your nc400-based amps?

I built it myself
25 (83.3%)
I paid someone to build it for me
2 (6.7%)
I purchased it from someone who builds them
1 (3.3%)
I purchased them second-hand
2 (6.7%)

Total Members Voted: 30

« previous next »
Pages: [1]   Go Down

How many people here built their nc400 amps themselves?

0 Members and 1 Guest are viewing this topic. Read 7784 times.

Julf

  • Full Member
  • Posts: 497
  • Grumpy second cousin of Mark V Shaney
How many people here built their nc400 amps themselves?
« on: 13 Nov 2014, 02:10 pm »
Just curious - how many people here built their amps themselves, and how many had them built for them (or pre-built to a standard spec)? I am just interested to see how well the hypex idea of reasonably priced (by high-end standards) modules for real hobbyists/DIY turned out...
« Last Edit: 14 Nov 2014, 10:03 am by Julf »
Logged

jtwrace

  • Full Member
  • Posts: 11424
  • www.theintellectualpeoplepodcast.com
    • TIPP YouTube Channel
Re: How many people here built their systems themselves?
« Reply #1 on: 13 Nov 2014, 03:13 pm »
It's now a sticky thread.   :thumb:
Logged

Julf

  • Full Member
  • Posts: 497
  • Grumpy second cousin of Mark V Shaney
Re: How many people here built their systems themselves?
« Reply #2 on: 13 Nov 2014, 04:14 pm »
Quote from: jtwrace on 13 Nov 2014, 03:13 pm
It's now a sticky thread.   :thumb:

Thanks!
Logged

Russell Dawkins

Re: How many people here built their systems themselves?
« Reply #3 on: 13 Nov 2014, 08:29 pm »
Is this about systems, as the title implies, or intended to be about ncore amps? If the latter, shouldn't the subject description be changed? If the former, why the ncore - specific poll at the top?
Logged

Airborn

Re: How many people here built their systems themselves?
« Reply #4 on: 14 Nov 2014, 02:31 am »
Assuming you mean the amp modules only, I built them myself with a little help from the threads on here and diy audio. :o
Logged

Julf

  • Full Member
  • Posts: 497
  • Grumpy second cousin of Mark V Shaney
Re: How many people here built their systems themselves?
« Reply #5 on: 14 Nov 2014, 10:05 am »
Quote from: Russell Dawkins on 13 Nov 2014, 08:29 pm
Is this about systems, as the title implies, or intended to be about ncore amps? If the latter, shouldn't the subject description be changed? If the former, why the ncore - specific poll at the top?

Fixed - was supposed to be ncore-specific, but I guess it applies to other hypex modules too.

"Building" is intended to mean more than just "picked the boxes to buy" and actually involve soldering etc.
Logged

Old_School

  • Jr. Member
  • Posts: 11
Re: How many people here built their nc400 amps themselves?
« Reply #6 on: 14 Nov 2014, 10:50 pm »
Built mine myself.
Logged

EuroDriver

Re: How many people here built their nc400 amps themselves?
« Reply #7 on: 24 Nov 2014, 06:03 am »
Built mine myself

Still planning to upgrade the case with some shielding and RF absorbing material for the SMPS
Logged

lowtech

  • Full Member
  • Posts: 497
Re: How many people here built their nc400 amps themselves?
« Reply #8 on: 24 Nov 2014, 09:02 am »
Built my 3x UcD amps about 10 years ago using mostly ST modules.  Haven't heard anything that sounds better. 






Logged
Pages: [1]   Go Up
« previous next »