Unfinished MDF Econowave Speaker Enclosures

0 Members and 1 Guest are viewing this topic. Read 1806 times.

FredT300B

  • Full Member
  • Posts: 542
Unfinished MDF Econowave Speaker Enclosures
« on: 12 Apr 2012, 11:15 pm »
SOLD

These two approx 4 cu ft enclosures accommodate an Eminence Delta 12LFA woofer and a Dayton Audio H6512 6-1/2" by 12" waveguide. The dimensions are 47"H, 18"W, 13-1/2"D. The seams are router-trimmed, and they are ready for painting or veneering. Using the Delta 12LFA woofer and the Selenium D220Ti compression driver, these enclosures can be used to build a 95dB sensitivity pair of Audio Karma Econowave speakers with +/- 3dB frequency response down into the low 40's.

They are available for pickup only by the buyer at my house in Houston. I'm asking $100 for the pair with ports and bi-wire speaker terminals. I can also provide a schematic diagram of the crossover for the Eminence Delta 12LFA/Selenium D220Ti driver combination. (The drivers, waveguides and crossover parts are available from Parts Express). See the picture below. Please email me at audiofred@comcast.net

http://fredt300b.smugmug.com/Hobbies/Speakers/132721_kcDVmw#!i=1430676119&k=gHJQx7t

(for some undetermined reason the link above will take you to the first page of the gallery. Go to page four of this gallery to see the enclosures. They are the ones in the center bottom line)
« Last Edit: 13 Apr 2012, 10:36 am by FredT300B »

sebrof

Re: Unfinished MDF Econowave Speaker Enclosures
« Reply #1 on: 12 Apr 2012, 11:28 pm »
eMail sent