« previous next »
Pages: [1]   Go Down

Simple and brief FAQ regarding crossover slopes and impedance characteristics

0 Members and 1 Guest are viewing this topic. Read 1323 times.

EDS_

  • Full Member
  • Posts: 725
Simple and brief FAQ regarding crossover slopes and impedance characteristics
« on: 3 Mar 2009, 02:45 am »
Anyone know of a site?

Thanks,
Ed
Logged

EDS_

  • Full Member
  • Posts: 725
Re: Simple and brief FAQ regarding crossover slopes and impedance characteristic
« Reply #1 on: 3 Mar 2009, 05:30 am »

nobody?
Logged

lonewolfny42

  • Full Member
  • Posts: 16918
  • Speakers....What Speakers ?
Re: Simple and brief FAQ regarding crossover slopes and impedance characteristics
« Reply #2 on: 3 Mar 2009, 05:45 am »
You could try the reference links here......
Logged

EDS_

  • Full Member
  • Posts: 725
Re: Simple and brief FAQ regarding crossover slopes and impedance characteristic
« Reply #3 on: 3 Mar 2009, 07:48 pm »
Thanks.
Logged

BobM

Re: Simple and brief FAQ regarding crossover slopes and impedance characteristics
« Reply #4 on: 3 Mar 2009, 07:51 pm »
You may want to post your question over at the Madisound forum. Lots of speaker builders over there who could point you in the right direction.

Bob
Logged

EDS_

  • Full Member
  • Posts: 725
Re: Simple and brief FAQ regarding crossover slopes and impedance characteristics
« Reply #5 on: 4 Mar 2009, 02:45 am »
Quote from: BobM on  3 Mar 2009, 07:51 pm
You may want to post your question over at the Madisound forum. Lots of speaker builders over there who could point you in the right direction.

Bob

Thanks Bob that's a great idea.
Logged

mgalusha

Re: Simple and brief FAQ regarding crossover slopes and impedance characteristics
« Reply #6 on: 4 Mar 2009, 03:42 am »
Rane has a very good document on crossover slopes and their characteristics. It has some very good information about different XO slopes and this applies for passive as well as active circuits.

http://www.rane.com/note160.html

Logged

EDS_

  • Full Member
  • Posts: 725
Re: Simple and brief FAQ regarding crossover slopes and impedance characteristics
« Reply #7 on: 4 Mar 2009, 05:00 am »
Quote from: mgalusha on  4 Mar 2009, 03:42 am
Rane has a very good document on crossover slopes and their characteristics. It has some very good information about different XO slopes and this applies for passive as well as active circuits.

http://www.rane.com/note160.html



Tip of the cap sir, thank you.
Logged
Pages: [1]   Go Up
« previous next »