2 drivers arrived this week. Tried them in open air, then made a pair of test mule H-frames from some leftover 16" x 0.75" melamine shelving.
Prototype H-Frames were modeled after the interior size of the Super-V's.
Center panel is recessed 6.5" from the front and back of the H-Frame.
Cut Sheet Per Driver:- 1 - 13" x 13" with 11" centered driver hole
- 4 - 13.75" x 13.75" sides
For a quick prototype, each side is the same size. Each side sits on top of one side and butts up against the other side as they wrap around 13"x13" center driver panel.
|---- |----
| O | | O |
----| ----|
Output in H-Frame is higher and frequency is lower than in free air.
Using a +6b/oct dipole rolloff compensation filter via JRMC 18 and XO via a Bryston 10B Sub PRO (gives up to +/- 5dB boost/cut of the main drivers to try and match levels with the subs).
Waiting for a back ordered Rythmik Servo plate amp to test the Servo feature next.