Lesson #1 Video, Topic: Single Stage Preamp Design

0 Members and 1 Guest are viewing this topic. Read 17489 times.

cheap-Jack

  • Full Member
  • Posts: 760
Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #80 on: 26 Nov 2012, 08:39 pm »
Hi.
At under $3k for the set it is IMO the best bargain in audio.

For cheap jack like me who doesn't want to drop a 3-grand bundle for an attenuator, I believe there must be other more cost-effective ways of doing the same job.

c-J

Rclark

Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #81 on: 26 Nov 2012, 08:42 pm »
DIY version is only around $300 or so, minus batteries, harness, and Ctek charger.

Clio09

Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #82 on: 26 Nov 2012, 11:32 pm »
For those who cannot DIY or do not have the time to or the interest, then the RM-10/LDR (Lightspeed or Warpspeed) bundle could be a nice starting point to building a system. Add an appropriate set of speakers and a source and for under $7500.00 you can have a very nice system. Given what people are inclined to pay for cables these days I would say that is a pretty good deal.

rbwalt

Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #83 on: 26 Nov 2012, 11:35 pm »
may i add that a RM10 matted with a pair of Merlin TSM's would put many to shame!

G Georgopoulos

  • Restricted
  • Posts: 1253
Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #84 on: 29 Nov 2012, 12:24 am »
Hi Roger
Is the second video coming soon... :)

kind regards

G Georgopoulos

  • Restricted
  • Posts: 1253
Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #85 on: 15 Dec 2012, 02:54 am »
Anyone know when Roger is going to do the next video..?? :green:

Roger A. Modjeski

Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #86 on: 20 Dec 2012, 07:04 pm »
I hope to over the holidays. Any suggestions on topic?

richidoo

Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #87 on: 20 Dec 2012, 08:07 pm »
I hope to over the holidays. Any suggestions on topic?

How about "The basics of tube output transformer design and construction."  OPT are one of the least understood aspects of the audio art, and you are one of the masters of that specialty.
Thanks!
Rich

Ericus Rex

Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #88 on: 20 Dec 2012, 08:43 pm »
I hope to over the holidays. Any suggestions on topic?

I would say to stick with the flow of the preamp.  I have very little concept of coupling seperate stages; output impedences into input impedences and other concepts of 'proper' coupling are Greek to me.  So your discussion of how the first stage you've outlined will couple and interact with the next stage would be pertinent, IMO.

G Georgopoulos

  • Restricted
  • Posts: 1253
Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #89 on: 20 Dec 2012, 11:48 pm »
How about "The basics of tube output transformer design and construction."  OPT are one of the least understood aspects of the audio art, and you are one of the masters of that specialty.
Thanks!
Rich

I second that...,Patrick Turner of http://www.turneraudio.com.au/ has a very nice inside of output
transformers.

Roger A. Modjeski

Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #90 on: 21 Dec 2012, 09:34 pm »
I second that...,Patrick Turner of http://www.turneraudio.com.au/ has a very nice inside of output
transformers.

I took a look at this URL and there is a lot there. Can you provide a link to the specific information about ouput transformers?

G Georgopoulos

  • Restricted
  • Posts: 1253
Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #91 on: 22 Dec 2012, 12:36 am »
I took a look at this URL and there is a lot there. Can you provide a link to the specific information about ouput transformers?

Hi Roger,here is a link,there is still alot of information there :D
http://www.turneraudio.com.au/education+diy.html

G Georgopoulos

  • Restricted
  • Posts: 1253
Re: Lesson #1 Video, Topic: Single Stage Preamp Design
« Reply #92 on: 9 Jan 2013, 04:55 am »
Hi Roger,any news on the next video??
Here is a link specifically on opt http://www.turneraudio.com.au/output-trans-theory.htm

Roger,keep up the good work with the preamp videos 8)

Regards