The sanded RC-5G before adding the topcoat. - These are pretopcoated and there is no finish on these shown. There are so many selections for topcoating. I chose to use Waterlox original sealer and finish (4 coats) followed by 3 coats of Waterlox original gloss finish (see next photo). I made a mistake and overdid it on the sealer. Apparently you can get the same results with 4 or 5 coats of strait gloss. In the future I'd probably do 1 coat of sealer and 4 coats of gloss, cutting out 2 of the coats. Actually, as nice as these came out in the future I'm getting a spray setup.

tiny | small | medium | large | xlarge | huge