Gallery :: Slideshow

Gallery »
Slideshow

Gallery

Lower bass cabinet parts all cut out	Braces all rounded over	Gluing in braces	Gluing in braces #2
Ready for 2nd side panel	Cabinet 1 - rear baffle (front)	Cabinet 1 - rear baffle (rear)	Cabinet 1
Twins	OB-7 cross over 1	OB-7 cross over 2	Ob7 crossover 3
Rear baffles glued , trimmed, sanded	Neil T's OB7 with extended grill , trying to decide how i like it better	Neil's again with one extended grill	tops removed to correct cabinet height
New tops and cabinets lined with no res, to or not to no res top plate	Finished no res instalatin	Front Baffles	Rear of front baffles, 7/8" round over
Close up of round over	Grill blanks cut, rounded over	Grill holes cut, rear recessed	Grill frame how its supposed to come out
(Untitled)	First finished grill frame	Here's the pair	Cutting the slots to run wires
Holes for wires between driver cutouts in OB section	Finished baffles with 3/4" roundover and magnets installed	Close up	Front baffle glued onto lower cabinet a
Front baffle glued onto lower cabinet b	Without cross over extensiion	With cross over / input terminal extension	Round overs and sanding done 1
Riybd ivers abd sabdubg 2	Here's the pair	And one more of the pair	Remote cross over box
Sample color, aged copper over spray on truck bed liner for tecture	On a black background	and another, trying to show the texture and compare it to raw MDF	Bases installed and cabinets blocked with 400 grit one last time
Used Behr Premium paint/primer as primer, still have to lightly sand	(Untitled)	This will be the final color, the coper just wasn't going to work in here	Too cold for painting so worked onthe grills this afternoon
fainlly, Metallic charcoal sprayed. Had to finish up the 2nd grill to see how it looked	finally , Metallic Charcoal	First cabinet assembled 1	2
OB wires tucked away in slots, still need to push em in a bit deeper	Initial setup without grills	Intial set up with grilla	Final Tuches (GR Logo)
(Untitled)	(Untitled)	(Untitled)	(Untitled)