Thumbnail for Crossover of the RM1 - Inside the VMPS RM1
Thumbnail for View of the RM1 internals... - White paint-like stuff is the soundcoat treatment.
Thumbnail for Crossover of the RM1, close up
Thumbnail for RM1 crossover, macro
Thumbnail for RM1 crossover II
Thumbnail for RM1 with BH5 installed
Thumbnail for Tweeter Replacement complete - Getting the old foam off was pita...so left on edges which the new foam would not cover.
Thumbnail for Blown tweeter ribbon. - They gotta make a replacement for just the ribbon...?
Thumbnail for New Tweeter in place with old face-plate/flange
Thumbnail for Replacement spiral ribbon tweeter - Arrived with broken flange.
Thumbnail for My compact Felix - I wanted as small a footprint as possible.
Thumbnail for Felix - Here is the Felix mounted directly onto an outlet. Not shown is the extra care taken to prevent shorting against the strap of the outlet...judicious use of insulating tape is required.
Thumbnail for Felix final format. - Finally I had to resort to piggy-backing the large cap above the smaller caps in order to fit the Felix/outlet into the standard weatherproof single gang box.
Thumbnail for My DIY Felix - Completed Felix mounted in non-magnetic outlet box (with 1" extension). IeGo power cord with silver plated connector.
Thumbnail for DIY Felix final - Fused for 10A. IeGo power cord with silver plated connector.
Thumbnail for Felix FS
Thumbnail for Felix in RS project box, 2x6x3
Thumbnail for Felix complete in RS box
Thumbnail for Stock HK transformer
Thumbnail for Massive 1KW transformer
Thumbnail for Class Daudio amp
Thumbnail for Power supply board repopulated with CD 80V caps. Total capacitance 40,000uF X 2. 
Empty space for second amp module.
Thumbnail for Stage1 layout.
Thumbnail for Speaker terminals/leads installed.
Thumbnail for Bare chassis, will need reinforcement before mounting the 1000KVA transformer.
Thumbnail for Steel plates on both sides...from inside...
Thumbnail for from below...
Thumbnail for Transformer securely bolted down
Thumbnail for Naksa 70 overview
Thumbnail for Naksa 70 rear
Thumbnail for Side view of resistor network replacing vol. pot
Thumbnail for front view of resistor network vs vol. pot
Thumbnail for ClassD Audio build w. 1kW transformer.
Thumbnail for What's in the box?
Thumbnail for Come on, what's in the box?
Thumbnail for A beach-head of course...
Thumbnail for Xti spk3
Thumbnail for Xti spk2
Thumbnail for Xti spk 1