Gallery :: Slideshow

Gallery »
Slideshow

Gallery

Radio Shack SPL Meter compensation chart	"Whoa! That's a lot of Vifa PL 18WO-09-4's" says Miko in astonishment. "They must be the midwoofs for Daddy's Line Array project"	Recesses cut	PL18W09 s fit
Top side down diagram	Dry-fit	2mm Dynamat sandwiched between 3/4 MDF and 3/4 Baltic Birch 13ply plywood on all sides	White LEDs anyone?
Half way there...	That's better...	Getting ready to gorilla glue the baffle to the MDF backing	clamps anyone?
Getting The sides dynamatted and glued...	Squeeze them babies with them clamps...	Baffle and sides dry-fitting 1	Baffle an sides dry-fitting 2
2 baffles and 2 of the sides routed and notched awaiting for gluin	Closeup of the MDF-dynamat-Birch Plywood sandwich 1.53 thick	Yet another dry-fit view	A perty view from inside
Them babies is heavy!	Finally gluing the back to the sides. Looking good!	Standing under their own weight finally.... Baffles, top and bottoms next...	Arizona Sunset
Yet another layer of dynamat for damping	Dynamatted, eggcrate foamed, now the baffles are glued in place	Monster 1 roundover radius. Sweeet!	Finally all routed, first coat of danish oil/tung oil/mineral spirit mix applied
Speakers after 3 coats of t.o./d.o./m.s.	Tweeter lines mounted on 1/8 thick aluminum stock	4 coats	After 5 coats. Yep. They re shiny!
I don t know when to stop. Will 27 coats be enough? :)	Stuffin and wiring the speakers	Ribbon tweeter lines before wiring	Errr, yeah... they re getting heavier...
Tell me those babies ain t perdy... :)	Sitting in the Family Room/HT	With the screen down	Perdy eh?
Euro Cup final in High Def. Go Greece!	DMD front	DMD back	Monster sub first 3 sides glued
Monster sub bracing	Monster sub semi-finished with Watco oil	2 Ascendant Audio Atlas 15 drivers for this monster sub	It s a sub, really, I told you...