Home
Circles
Gallery
Systems
Calendar
About/Help
Login
Register
Gallery
»
Browse gallery
»
Albums by FrankCA
»
Flat Panel Vol. 1
Gallery
Browse gallery
Random albums
I'm Feeling lucky
Up to Albums by FrankCA
Flat Panel Vol. 1
Choir loft monitor project and associated experimentation.
I've done a few rows... you can see the progress, and also tell where you might not have used enough.
Far panel now has corrugations done, near panel has first coat of shellac on the shiny side. Work fast, this stuff dries quickly! You can see on the far panel a few spots I will need to touch up!
Note the curl in the previous shot. This is how you get rid of it. The first panel did it too. Let it dry thoroughly before adding more shellac.
Distraction!
Exciters mounted to frame. It is so long because I will need it that way for testing, but once the concept is proved I will cut them down to final size. They will mount from the slanted ceiling, and I must deal with each one separately in order to get them the proper distance on each side to make them level.
Straight on view.
Side view.
Mounted exciter, soldered leads.
A look at making the plexi circles attached to the exciters. One is already "roughed up".
Exciter with plexi circle attached. Note the shims to allow me to weight the panel when I glue it on. They are to keep the exciter from being damaged by the weight.
Very light coat of spray paint allowed me to see where I had laid out my Monacor #1 position point. I scraped the paint off of the contact area prior to gluing.
Exciter, panel and adhesive.
«
Prev
| Page 2 |
Next
»
View slideshow