A request for Danny - LS Center Channel Kit

Outofthewoods · « **Reply #140 on:** 7 Mar 2011, 10:00 pm »

We got the ball rolling on the Moho veneer!

Just waiting to hear back about shipping clearance.

I'll let you know how it pans out as soon as I hear back.

Thanks,

Ruben

Outofthewoods · « **Reply #141 on:** 9 Mar 2011, 01:58 am »

I've been asked weather or not I plan to build the LS-C to mirror the shape of LS 6/9's with a 3/4" Round-Over on the short vertical edges. Although it would simplify the build somewhat, it would absolutely compromise performance due to added surface reflections in the upper ranges of the tweeter. There are also edge diffraction issues to consider due to the abrupt edge.

I will happily build them in whatever shape or finish you'd like, but keep in mind that a 3/4" R.O. on the top and bottom edge is optimum.

Thanks!

Ruben

oz_audio_todd · « **Reply #142 on:** 12 Mar 2011, 07:47 am »

OK, I gotta ask, has anybody actually heard one (or for that matter, a pair) of these things, may be even plotted a response or several, may be racked it up against the N3S or N3's or the OB7's to give us a better idea of what we have here?

Danny Richie · « **Reply #143 on:** 12 Mar 2011, 01:58 pm »

Quote from: oz_audio_todd on 12 Mar 2011, 07:47 am

OK, I gotta ask, has anybody actually heard one (or for that matter, a pair) of these things, may be even plotted a response or several, may be racked it up against the N3S or N3's or the OB7's to give us a better idea of what we have here?

I know these drivers pretty well. I don't see any issue with creating a snooth response out of them.

rseynaev · « **Reply #144 on:** 12 Mar 2011, 09:57 pm »

Danny - how is development of the LS Center kit going?

edoggrc51 · « **Reply #145 on:** 12 Mar 2011, 10:01 pm »

Quote from: rseynaev on 12 Mar 2011, 09:57 pm

Danny - how is development of the LS Center kit going?

+1

oz_audio_todd · « **Reply #146 on:** 13 Mar 2011, 06:28 am »

Quote from: Danny on 12 Mar 2011, 01:58 pm

I know these drivers pretty well. I don't see any issue with creating a snooth response out of them.

Haha, I dont doubt that or yourself for a sec Danny

Still curious about the finer (or bigger

) details though

edoggrc51 · « **Reply #147 on:** 18 Mar 2011, 03:41 am »

Any updates fellas??

Outofthewoods · « **Reply #148 on:** 18 Mar 2011, 04:26 pm »

Hey edog,

I know Danny has a lot to get done before Axpona. http://www.axpona.com/
So, I don't know how much he has been able to work on it these past 2 weeks?

As for me, I'm ready to go!

Ruben

edoggrc51 · « **Reply #149 on:** 18 Mar 2011, 04:45 pm »

Quote from: Outofthewoods on 18 Mar 2011, 04:26 pm

Hey edog,

I know Danny has a lot to get done before Axpona. http://www.axpona.com/
So, I don't know how much he has been able to work on it these past 2 weeks?

As for me, I'm ready to go!

Ruben

Thanks for the info bro!

Can you PM me a price for a cabinet (shipped to 92336) in a satin rosewood finish?

mojave · « **Reply #150 on:** 18 Mar 2011, 06:01 pm »

Quote from: Outofthewoods on 18 Mar 2011, 04:26 pm

I know Danny has a lot to get done before Axpona.

I can't find GR Research listed as an exhibitor. Are they sharing a room with someone else?

Danny Richie · « **Reply #151 on:** 18 Mar 2011, 06:21 pm »

I am there supporting one of my clients, Carnegie Acoustics.

HT cOz · « **Reply #152 on:** 18 Mar 2011, 10:56 pm »

That new speaker must put on one amazing show.

mlbrand · « **Reply #153 on:** 21 Mar 2011, 03:32 am »

So how much room does the LS Center need behind it to work properly? For those too close to a wall, can the LS Center be designed with a sealed option, or is an N3S the best way to go in that case?

BTW, I'm using an X-Voce center with my LS-6's, and built and use a pair of N3S speakers as side surrounds. I actually like my X-Voce, but could always use a new project to do if I can improve my system.

RJH65 · « **Reply #154 on:** 22 Mar 2011, 12:37 am »

Quote from: Outofthewoods on 18 Mar 2011, 04:26 pm

Hey edog,

I know Danny has a lot to get done before Axpona. http://www.axpona.com/
So, I don't know how much he has been able to work on it these past 2 weeks?

As for me, I'm ready to go!

Ruben

Yeah please also send me a PM with a price on a satin rosewood LS-C to zip code 93110 Rueben thanks

Outofthewoods · « **Reply #155 on:** 22 Mar 2011, 03:26 am »

Quote from: edoggrc51 on 18 Mar 2011, 04:45 pm

Thanks for the info bro!

Can you PM me a price for a cabinet (shipped to 92336) in a satin rosewood finish?

Quote from: RJH65 on 22 Mar 2011, 12:37 am

Yeah please also send me a PM with a price on a satin rosewood LS-C to zip code 93110 Rueben thanks

Sending PM's now.

Ruben

RJH65 · « **Reply #156 on:** 22 Mar 2011, 08:15 pm »

Quote from: Outofthewoods on 22 Mar 2011, 03:26 am

Sending PM's now.

Ruben

Hey Rueben, please send the PM and quote the complete finished version and cabinet only in the satin rosewood to 93110. I received an error message earlier thanks!

Danny Richie · « **Reply #157 on:** 22 Mar 2011, 10:09 pm »

Welcome to AC, RJH65.

edoggrc51 · « **Reply #158 on:** 22 Mar 2011, 10:45 pm »

Quote from: Outofthewoods on 22 Mar 2011, 03:26 am

Sending PM's now.

Ruben

Replied

Outofthewoods · « **Reply #159 on:** 23 Mar 2011, 02:51 am »

Quote from: RJH65 on 22 Mar 2011, 08:15 pm

Hey Rueben, please send the PM and quote the complete finished version and cabinet only in the satin rosewood to 93110. I received an error message earlier thanks!

Sorry about that!

Trying again now.

Quote from: edoggrc51 on 22 Mar 2011, 10:45 pm

Replied

Right back at ya!

Thanks,

Ruben