AudioCircle

Audio/Video Gear and Systems => The Vintage Circle => Topic started by: Bill Thomas on 22 Oct 2009, 10:16 pm

Title: Welcome to the Vintage Circle! (Please Read.)
Post by: Bill Thomas on 22 Oct 2009, 10:16 pm
     Welcome to the "Vintage Circle" at Audiocircle.  This is an area devoted to the discussion of audio equipment and material from the earlier days of High Fidelity.  We hope to make this an enjoyable and friendly place to discuss all aspects of "Vintage" Hi-Fi.  Lively discussion is encouraged, but PLEASE keep normal forum rules in mind. 

1.  No Commercial Posts are allowed here.  Private offers to buy and sell equipment should be posted in the "Marketplace Circle." 

2.  "Flame Wars" (and other disruptive behavior) will not be tolerated.  This does NOT mean you can't voice disagreement.  It simply means that we don't take kindly to personal attacks. 

3.  NO SPAM OF ANY KIND will be allowed.  No Nigerian banking schemes,  no pharmaceutical offers,  no "massage therapy" posts.  We are interested in AUDIO here. 

4.  We encourage "lively" discussion, but PLEASE try to keep profanity or material of an "adult" nature out of the discussion.  If you wouldn't say it to your Mother, *try* not to say it here. 

5.  With all that in mind, HAVE FUN!  This circle can be an AMAZING resource for people who have discovered that "Vintage Audio Gear" can be an AMAZINGLY inexpensive alternative to today's ULTRA Expen$ive "High-End" equipment.

       If you have any questions about this area of Audiocircle, feel free to contact me, but PLEASE realize that while I am now in the "Vintage" category myself, I am still actively employed, so it might take a bit of time for me to respond to a personal message or an e-mail.  I promise to do the best I can.

      With all that out of the way, let's have some FUN! 

Sincerely, 

Bill Thomas
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: ArthurDent on 23 Oct 2009, 12:47 am
Congrats on your Facilitatorship Mr. T.   :thumb:  While I haven't made any moves to the Vintage arena as yet (short of plans to resurrect an old TT), I have viewed many of your project posts with awe and appreciation. The quality of your work, and the step by step explanations to those who might wish to attempt similar projects is top notch. Thanks for those posts. I hope they will continue as time allows, and I look forward to what I'm sure will be interesting and beneficial information available in this Circle.  :D
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: Bill Thomas on 23 Oct 2009, 01:00 am
Thanks, Arthur.  Those are mighty kind words.  I'll try to live up to them.

Bill
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: JakeJ on 23 Oct 2009, 02:27 am
Congratulations, Bill!!  :dance:

Change is a good thing, thanks to TCG for holding the reigns and for passing them on to a well-suited replacement.

Bill, have thoroughly enjoyed your vintage rebuild threads, keep up the excellent work.

Thanks,
JakeJ
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: S Clark on 23 Oct 2009, 02:55 am
This circle always gets my attention.  My system often has at least one piece in it that is "vintage".  Glad to see Bill take up the circle.  Can't think of anyone better qualified.
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: ltr317 on 23 Oct 2009, 03:26 am
Congrats Bill.  Good luck your facilitatorship.  :bowdown:   I have several "vintage" pieces as evidenced in my system listing below. 
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: Jazzman53 on 29 Sep 2010, 01:57 am
Hello Bill (and everyone else),
I've just joined the Audio Circle moments ago.  I don't see a place for introductions but since my system is all vintage Carver stuff, your circle seems like the right place to be. I've just added my system and this is my first post.  Anyway, just saying "Hi" for now and checking out all the cool systems and circles  :thumb:
regards,
Charlie
(Jazzman53)   
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: SteveFord on 29 Sep 2010, 02:07 am
It's about time I got to see more than just those wild speakers.
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: JakeJ on 29 Sep 2010, 02:34 am
Hi Jazzman53,
Welcome to AC.  Nice system!
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: ltr317 on 29 Sep 2010, 03:42 am
Jazzman - Nice home made electrostatics.  :thumb:
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: Delta Wave on 29 Sep 2010, 05:26 am
Jazzman - Nice home made electrostatics.  :thumb:

Indeed!  :thumb:
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: Jazzman53 on 29 Sep 2010, 09:08 am
Thanks you guys,
In case anyone is interested, here's a link with full details on how my electrostats were built: 
http://jazzman-esl-page.blogspot.com/
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: Jazzman53 on 1 Oct 2010, 12:05 am
It's about time I got to see more than just those wild speakers.

Geeze, those Carver guys are everywhere... and it's good to see a familiar name  :D   
 
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: SteveFord on 1 Oct 2010, 12:19 am
PDR, Balok, dokblues, they're around somewhere or other on here.  This is a good site, there's a lot of circles to hold your interest.
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: timind on 1 Oct 2010, 01:31 am
Thanks you guys,
In case anyone is interested, here's a link with full details on how my electrostats were built: 
http://jazzman-esl-page.blogspot.com/

Very impressive workmanship. I'm speechless.
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: Delta Wave on 1 Oct 2010, 06:35 am
Very impressive workmanship. I'm speechless.

I want a set!
...but... how do they sound?  :wink:
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: Jazzman53 on 1 Oct 2010, 09:51 am
I want a set!
...but... how do they sound?  :wink:
Well, you can get some!  And you can get em' cheap if roll your own.
If you really want to know how they sound... go for it!  (you won't be disappointed)               
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: Delta Wave on 1 Oct 2010, 04:30 pm
Well, you can get some!  And you can get em' cheap if roll your own.
If you really want to know how they sound... go for it!  (you won't be disappointed)             

Yet another thing to throw on the ol' project pile! Perhaps after I finish rebuilding my guitar amp... PCB's are over-rated.  :thumb:
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: denny9167 on 20 Feb 2011, 04:03 am
Hey Bill,

Thanks for letting me on,I will try to be as profitable,and as hospitable as you have been already.

Denny Brown
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: SteveFord on 21 Sep 2012, 12:02 am
I'm afraid that Bill Thomas passed away before I got here so I never got to know the man.
As this circle was in wont of a Facilitator I've volunteered to do it.
I figured that most of my junk is pretty old so why not.
With any luck we can make this circle a bit more active.

The same rules as Bill had (or the Planar Circle has) are in effect.
If you want to fight, get married as that old saying goes.
Otherwise, have fun.
P.S.
I believe that a Facilitator is very similar to an enabler so I encourage all of you to start scouring Craig's List, Estate Sales, the minefield that is eBay and the like to get yourself some "new" goodies to deplete your bank account, estrange your spouse, enrich your life and to share with us.
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: JohnR on 21 Sep 2012, 12:28 am
Thank you, Steve  :thumb:

get yourself some "new" goodies to deplete your bank account, estrange your spouse, enrich your life and to share with us.

Sounds like a plan!
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: ltr317 on 21 Sep 2012, 02:40 am
Thanks Steve.  You just crossed over to the dark side. 
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: lonewolfny42 on 21 Sep 2012, 05:15 am
Quote
As this circle was in wont of a Facilitator I've volunteered to do it.

Good luck Steve........... :beer:
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: SteveFord on 21 Sep 2012, 09:43 am
Thanks Steve.  You just crossed over to the dark side.

That only happens when you let out the Magic Smoke.

Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: Guy 13 on 21 Sep 2012, 10:03 am

Hi all Audio Circle members.

This Vintage Circle is a good idea (Thanks)
and it arrive just in time for me.
 
I am seriously looking for some Vintage stuff,
stuff from the good old days.

I will post my wish list and see if someone can help me
with my priliminary choice.

Guy 13
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: galaxyoilcan on 22 Sep 2012, 10:40 am
Congrats on the new gig Steve! Thanks for volunteering.
I'm hoping I can get as turned on here as I have at the CS.

ps. Will I have to go through this verificataion BS every time I post or do I eventually graduate to a trusted member? Maybe I should read the rules.
Oh! BTW what's with the 1001 fetish? :lol:
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: SteveFord on 22 Sep 2012, 11:01 am
The first couple of posts have to be approved to keep out spammers and nut cases.
I have no idea what you mean by the 1001 fetish?
Title: Re: Welcome to the Vintage Circle! (Please Read.)
Post by: Cadderly on 24 Jul 2020, 02:29 pm
Hi all,

Love learning about hifi of yesteryear! Look forward to adding some pics of my gear and hopefully finding others who might know more about my stuff. Right now, been collecting Audio Matiere gear and Counterpoint Clearfield speakers :)