Thanks for reply guys,
What threw me off was the cable 2 unshielded wires, i tried twisting the wires individually and connected to terminals but i heard no sound. I did not had in mind that one of the wires was coated. The driver works as i tested it separately. Im going to try again very patently im going to get a soldering arm station to hold the wires. Im using non lead solder, for some reason the solder did not wanted to stick to the wires, i read that hand oil is a big negative when it comes to solder. once i get everything together and i get sound, i will make a sound test to hear if the polarity was correct or in phase. Again thanks for advice.