Please help find a good amp for 3.6's

0 Members and 1 Guest are viewing this topic. Read 7854 times.

2bigears

Please help find a good amp for 3.6's
« on: 4 Mar 2012, 11:18 pm »
 :D  hello all good people of AC....I need an integrated amp for a set of Maggie 3.6's....Only to keep things simple.  Any good fits ??  Thanks..
     Pat     :D

2bigears

Re: Please help find a good amp for 3.6's
« Reply #1 on: 5 Mar 2012, 12:06 am »
 :D  Frank @ AVA might be the answer to my own ??

medium jim

Re: Please help find a good amp for 3.6's
« Reply #2 on: 5 Mar 2012, 01:50 am »
Pat:

I'm a bottlehead, so I'm biased.  It all depends on how much you ate looking to spend.  The problem is that there are many more high quality non-integrated amps than integrated.  The best of both worlds might be a hybrid with tubes in the preamp section. 

Jim

rodge827

Re: Please help find a good amp for 3.6's
« Reply #3 on: 5 Mar 2012, 02:01 am »
Budget?

TONEPUB

Re: Please help find a good amp for 3.6's
« Reply #4 on: 5 Mar 2012, 02:13 am »
If you don't have to go integrated, I'd suggest Dusty at Channel Islands D500mk II mono blocks.  I had excellent luck driving 1.6, 1.7, 3.7 and 20.1 with these amps.

Ive also had great luck with the Luxman L-590A II, the Burmester 032, the McIntosh MC7000, the SimAudio 600i, 700i and i-7.

rw@cn

  • Full Member
  • Posts: 336
Re: Please help find a good amp for 3.6's
« Reply #5 on: 5 Mar 2012, 12:11 pm »
If you don't have to go integrated, I'd suggest Dusty at Channel Islands D500mk II mono blocks.  I had excellent luck driving 1.6, 1.7, 3.7 and 20.1 with these amps.

Ive also had great luck with the Luxman L-590A II, the Burmester 032, the McIntosh MC7000, the SimAudio 600i, 700i and i-7.

Care to compare the Channel Islands to Pass?  :)

Hasse

  • Jr. Member
  • Posts: 48
  • "Jazz is not dead, it just smells funny" - FZ
Re: Please help find a good amp for 3.6's
« Reply #6 on: 5 Mar 2012, 08:52 pm »
Care to compare the Channel Islands to Pass?  :)
Pass is often considered a great match with Maggies. Anyone has experience with the XA-amps with 3.6/3.7? How does Pass compare to Bryston (also a popular match) with Magnepans?

satie

  • Jr. Member
  • Posts: 90
Re: Please help find a good amp for 3.6's
« Reply #7 on: 5 Mar 2012, 11:06 pm »
We can give you better advice if you can tell us: Room size, listening level preference, whether you intend to use with a subwoofer, and of course the budget and whether you would consider biamping.

As a general no brainer, the largest Wyred 4 Sound integrated (1 kilowat at 4 ohms) will solve most of the problems driving these speakers and sounds great for a great price.

2bigears

Re: Please help find a good amp for 3.6's
« Reply #8 on: 5 Mar 2012, 11:23 pm »
 :D  Pass XA's are big money,,right..  The big W4S integrated is 25hundred which is about my top budget for this 2nd system.....thanks all for the input..  I never even knew about that 1kw W4S .... :D

walkern

  • Full Member
  • Posts: 459
Re: Please help find a good amp for 3.6's
« Reply #9 on: 5 Mar 2012, 11:41 pm »
Anthem builds a 225 wpc integrated amp that sounds really nice with the 3.6s.  Never heard it with the 3.7s, but I would think it would also drive them very well.

rollo

  • Industry Participant
  • Posts: 5460
  • Rollo Audio Consulting -
Re: Please help find a good amp for 3.6's
« Reply #10 on: 6 Mar 2012, 12:07 am »
 So many choices. Subjective at best. IMO Maggies require a rich or warm sounding amp to sound their best.
    Tonepub made some VG suggestions. Me I would choose a VAC or ASR Emitter, but they cost mucho dinero. Other choices which are more neutral in character would be Bryston, AVA or Cherry.



charles
   


medium jim

Re: Please help find a good amp for 3.6's
« Reply #12 on: 6 Mar 2012, 12:44 am »
Many like Emotiva amps with Maggies and they're not expensive

Jim

catastrofe

  • Full Member
  • Posts: 929
  • "That's what credit cards are for. . ."
Re: Please help find a good amp for 3.6's
« Reply #13 on: 6 Mar 2012, 12:53 am »

Emil

Re: Please help find a good amp for 3.6's
« Reply #14 on: 6 Mar 2012, 05:08 am »
Pat
Keeping with your original request of an integrated, I used a Valve Audio Predator for several years first with my 1.6s and then with 3.6s.
http://www.valveaudio.co.za/pdf/review_toneaudio_predator.pdf
6922 preamp section so you can tube roll to your hearts content.

medium jim

Re: Please help find a good amp for 3.6's
« Reply #15 on: 6 Mar 2012, 06:51 am »
Pat
Keeping with your original request of an integrated, I used a Valve Audio Predator for several years first with my 1.6s and then with 3.6s.
http://www.valveaudio.co.za/pdf/review_toneaudio_predator.pdf
6922 preamp section so you can tube roll to your hearts content.

Emil:


Good call!

Jim

2bigears

Re: Please help find a good amp for 3.6's
« Reply #16 on: 6 Mar 2012, 10:02 pm »
 :D  that Audio Predator looks very nice...4k plus to get to my location all in i would have to add another 1/2k..... so that's big budget.... That 225 Anthem is only 1600 bucks....   Big difference !!  Not sure which way to go,, i do like quality to be sure.....  Not too many used integrated amps for sale that are good quality....   seems you get Hi and Low,,not much mid field.. :D

Emil

Re: Please help find a good amp for 3.6's
« Reply #17 on: 6 Mar 2012, 11:33 pm »
:D  that Audio Predator looks very nice...4k plus to get to my location all in i would have to add another 1/2k..... so that's big budget.... That 225 Anthem is only 1600 bucks....   Big difference !!  Not sure which way to go,, i do like quality to be sure.....  Not too many used integrated amps for sale that are good quality....   seems you get Hi and Low,,not much mid field.. :D

A used Predator will come up on Audiogon occasionally for about a grand. A steal at that price if you ask me.
If you're really, really interested in one, I can contact the individual that bought mine recently. He bought mine as a spare. just PM me

2bigears

Re: Please help find a good amp for 3.6's
« Reply #18 on: 7 Mar 2012, 12:01 am »
 :D  well thanks..... I am interested indeed.... looks like a quality piece that will fit the bill ..  thanks so much for the help.... :D

opnly bafld

  • Full Member
  • Posts: 2414
  • 83 Klipsch LSIs
« Last Edit: 9 Mar 2012, 06:03 pm by opnly bafld »