Hi Chris,
I think that shareplay is crashing since I installed S2.22 2016-01-11. After a restart of the BDP-1 shareplay isn't running.
The System Log is below. I don't know if that helps.
regards
Ron
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16-0.bpo.2-486 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.16.3-2~bpo70+1 (2014-09-21)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000f7affff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000f7b0000-0x000000000f7b2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000f7b3000-0x000000000f7bffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xf7b0 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0e400000-0x0e7fffff]
[ 0.000000] [mem 0x0e400000-0x0e7fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x08000000-0x0e3fffff]
[ 0.000000] [mem 0x08000000-0x0e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x07ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0f7affff]
[ 0.000000] [mem 0x0e800000-0x0f3fffff] page 2M
[ 0.000000] [mem 0x0f400000-0x0f7affff] page 4k
[ 0.000000] BRK [0x01727000, 0x01727fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x0ea23000-0x0f79ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F6140 000014 (v00 AMDGX3)
[ 0.000000] ACPI: RSDT 0x0F7B3040 000028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x0F7B30C0 000074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20140424/tbfadt-699)
[ 0.000000] ACPI: DSDT 0x0F7B3180 002B6E (v01 AMDGX3 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x0F7B0000 000040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 247MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0f7b0000
[ 0.000000] low ram: 0 - 0f7b0000
[ 0.000000] BRK [0x01728000, 0x01728fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x0f7affff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x0f7affff]
[ 0.000000] On node 0 totalpages: 63309
[ 0.000000] free_area_init_node: node 0, pgdat c15ffe20, node_mem_map ce833020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 464 pages used for memmap
[ 0.000000] Normal zone: 59312 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x9c10
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x0f7c0000-0xfffeffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62813
[ 0.000000] Kernel command line: boot=live noautologin noxautologin nouser debug nolocales quickreboot username=root hostname=bryston-bdp-1 union=aufs console=tty0
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 229780K/253236K available (4314K kernel code, 504K rwdata, 1384K rodata, 668K init, 412K bss, 23456K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xcffb0000 - 0xff7fe000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcf7b0000 ( 247 MB)
[ 0.000000] .init : 0xc1612000 - 0xc16b9000 ( 668 kB)
[ 0.000000] .data : 0xc1436f2f - 0xc1610180 (1892 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1436f2f (4315 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=ce406000 soft=ce408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 498.059 MHz processor
[ 0.004023] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.11 BogoMIPS (lpj=1992236)
[ 0.004160] pid_max: default: 32768 minimum: 301
[ 0.004277] ACPI: Core revision 20140424
[ 0.025099] ACPI: All ACPI Tables successfully acquired
[ 0.025256] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.028217] Security Framework initialized
[ 0.028321] AppArmor: AppArmor disabled by boot time parameter
[ 0.028393] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.028522] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.028602] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.029889] Initializing cgroup subsys memory
[ 0.029980] Initializing cgroup subsys devices
[ 0.032059] Initializing cgroup subsys freezer
[ 0.032140] Initializing cgroup subsys net_cls
[ 0.032238] Initializing cgroup subsys blkio
[ 0.032328] Initializing cgroup subsys perf_event
[ 0.032404] Initializing cgroup subsys net_prio
[ 0.032583] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.032583] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.032583] tlb_flushall_shift: -1
[ 0.032704] CPU: Geode(TM) Integrated Processor by AMD PCS (fam: 05, model: 0a, stepping: 02)
[ 0.039577] ftrace: allocating 19617 entries in 39 pages
[ 0.088340] Performance Events: no PMU driver, software events only.
[ 0.102791] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.103234] devtmpfs: initialized
[ 0.104910] PM: Registering ACPI NVS region [mem 0x0f7b0000-0x0f7b2fff] (12288 bytes)
[ 0.116328] pinctrl core: initialized pinctrl subsystem
[ 0.116840] NET: Registered protocol family 16
[ 0.117991] EISA bus registered
[ 0.118061] cpuidle: using governor ladder
[ 0.118131] cpuidle: using governor menu
[ 0.118924] ACPI: bus type PCI registered
[ 0.118989] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.120602] PCI: PCI BIOS revision 2.10 entry at 0xfa990, last bus=0
[ 0.120674] PCI: Using configuration type 1 for base access
[ 0.128247] ACPI: Added _OSI(Module Device)
[ 0.128321] ACPI: Added _OSI(Processor Device)
[ 0.128387] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128454] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.145954] ACPI: Interpreter enabled
[ 0.146037] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.146209] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.146377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.146557] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.146745] ACPI: (supports S0 S5)
[ 0.146809] ACPI: Using PIC for interrupt routing
[ 0.146988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.171781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.171885] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.171983] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.172577] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.173576] PCI host bridge to bus 0000:00
[ 0.173662] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.173738] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.173815] pci_bus 0000:00: root bus resource [io 0x0d00-0xac17]
[ 0.173898] pci_bus 0000:00: root bus resource [io 0xac20-0xffff]
[ 0.173976] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.174056] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff]
[ 0.174135] pci_bus 0000:00: root bus resource [mem 0x0f7c0000-0xfebfffff]
[ 0.174337] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[ 0.174543] pci 0000:00:01.0: reg 0x10: [io 0xac1c-0xac1f]
[ 0.174714] pci 0000:00:01.0: reg 0x14: [io 0x9e00-0x9e07]
[ 0.176062] pci 0000:00:01.1: [1022:2081] type 00 class 0x030000
[ 0.176420] pci 0000:00:01.1: reg 0x10: [mem 0xee000000-0xeeffffff]
[ 0.176693] pci 0000:00:01.1: reg 0x14: [mem 0xefff0000-0xefff3fff]
[ 0.176966] pci 0000:00:01.1: reg 0x18: [mem 0xeffec000-0xeffeffff]
[ 0.177237] pci 0000:00:01.1: reg 0x1c: [mem 0xeffe8000-0xeffebfff]
[ 0.177508] pci 0000:00:01.1: reg 0x20: [mem 0xefff8000-0xefffbfff]
[ 0.178714] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[ 0.179029] pci 0000:00:01.2: reg 0x10: [mem 0xefff4000-0xefff7fff]
[ 0.180865] pci 0000:00:0c.0: [1412:1724] type 00 class 0x040100
[ 0.180965] pci 0000:00:0c.0: reg 0x10: [io 0xff00-0xff1f]
[ 0.181049] pci 0000:00:0c.0: reg 0x14: [io 0xfe00-0xfe7f]
[ 0.181199] pci 0000:00:0c.0: supports D2
[ 0.181414] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.181912] pci 0000:00:0d.0: [1106:3053] type 00 class 0x020000
[ 0.182009] pci 0000:00:0d.0: reg 0x10: [io 0xfa00-0xfaff]
[ 0.182095] pci 0000:00:0d.0: reg 0x14: [mem 0xeffff000-0xeffff0ff]
[ 0.182248] pci 0000:00:0d.0: supports D1 D2
[ 0.182320] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.182997] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.183570] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[ 0.183947] pci 0000:00:0f.0: reg 0x10: [io 0x6000-0x6007]
[ 0.184266] pci 0000:00:0f.0: reg 0x14: [io 0x6100-0x61ff]
[ 0.184586] pci 0000:00:0f.0: reg 0x18: [io 0x6200-0x623f]
[ 0.184907] pci 0000:00:0f.0: reg 0x1c: [io 0x0000-0x001f]
[ 0.185232] pci 0000:00:0f.0: reg 0x20: [io 0x9d00-0x9d7f]
[ 0.185570] pci 0000:00:0f.0: reg 0x24: [io 0x9c00-0x9c3f]
[ 0.186659] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[ 0.187686] pci 0000:00:0f.2: reg 0x20: [io 0xfd00-0xfd0f]
[ 0.188209] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.188289] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.188367] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.188446] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.189313] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[ 0.189777] pci 0000:00:0f.4: reg 0x10: [mem 0xefffe000-0xefffefff]
[ 0.191444] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.191800] pci 0000:00:0f.4: System wakeup disabled by ACPI
[ 0.192488] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[ 0.192906] pci 0000:00:0f.5: reg 0x10: [mem 0xefffd000-0xefffdfff]
[ 0.194557] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.194914] pci 0000:00:0f.5: System wakeup disabled by ACPI
[ 0.195452] pci_bus 0000:00: on NUMA node 0
[ 0.196714] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.197836] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[ 0.198928] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
[ 0.200107] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[ 0.205012] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.205758] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[ 0.205848] vgaarb: loaded
[ 0.205907] vgaarb: bridge control possible 0000:00:01.1
[ 0.206471] PCI: Using ACPI for IRQ routing
[ 0.206538] PCI: pci_cache_line_size set to 32 bytes
[ 0.206647] pci 0000:00:01.0: can't claim BAR 0 [io 0xac1c-0xac1f]: no compatible bridge window
[ 0.207102] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.207175] e820: reserve RAM buffer [mem 0x0f7b0000-0x0fffffff]
[ 0.208635] Switched to clocksource pit
[ 0.250240] pnp: PnP ACPI init
[ 0.250428] ACPI: bus type PNP registered
[ 0.251175] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.251262] system 00:00: [mem 0x0f7b0000-0x0f7bffff] could not be reserved
[ 0.251345] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.251485] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.251568] system 00:00: [mem 0x00100000-0x0f7affff] could not be reserved
[ 0.251650] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.251734] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.253173] pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io 0x0000-0x001f]
[ 0.253575] system 00:01: [io 0x0b78-0x0b7b] has been reserved
[ 0.253656] system 00:01: [io 0x0f78-0x0f7b] has been reserved
[ 0.253735] system 00:01: [io 0x0a78-0x0a7b] has been reserved
[ 0.253814] system 00:01: [io 0x0e78-0x0e7b] has been reserved
[ 0.253893] system 00:01: [io 0x0bbc-0x0bbf] has been reserved
[ 0.253972] system 00:01: [io 0x0fbc-0x0fbf] has been reserved
[ 0.254050] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.254131] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.254487] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.257085] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.258534] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.260719] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.261388] pnp: PnP ACPI: found 6 devices
[ 0.261453] ACPI: bus type PNP unregistered
[ 0.261533] PnPBIOS: Disabled by ACPI PNP
[ 0.311927] Switched to clocksource acpi_pm
[ 0.312070] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f]
[ 0.312219] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.312295] pci_bus 0000:00: resource 5 [io 0x0d00-0xac17]
[ 0.312371] pci_bus 0000:00: resource 6 [io 0xac20-0xffff]
[ 0.312448] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.312526] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000dffff]
[ 0.312605] pci_bus 0000:00: resource 9 [mem 0x0f7c0000-0xfebfffff]
[ 0.312794] NET: Registered protocol family 2
[ 0.314543] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.314655] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.314756] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.314926] TCP: reno registered
[ 0.314992] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.315076] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.315435] NET: Registered protocol family 1
[ 0.315660] pci 0000:00:01.1: Boot video device
[ 0.318207] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
[ 0.318285] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.318353] PCI: setting IRQ 11 as level-triggered
[ 0.389007] PCI: CLS 32 bytes, default 32
[ 0.389372] Unpacking initramfs...
[ 2.986208] Freeing initrd memory: 13812K (cea23000 - cf7a0000)
[ 2.987025] microcode: AMD CPU family 0x5 not supported
[ 2.989321] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 2.989510] audit: initializing netlink subsys (disabled)
[ 2.989645] audit: type=2000 audit(1454350359.987:1): initialized
[ 2.991231] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.991417] zbud: loaded
[ 2.991751] VFS: Disk quotas dquot_6.5.2
[ 2.991861] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.992225] msgmni has been set to 475
[ 2.994266] alg: No test for stdrng (krng)
[ 2.994461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.994767] io scheduler noop registered
[ 2.994851] io scheduler deadline registered
[ 2.995165] io scheduler cfq registered (default)
[ 2.995961] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.996247] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.996916] GHES: HEST is not enabled!
[ 2.997109] isapnp: Scanning for PnP cards...
[ 3.352397] isapnp: No Plug & Play device found
[ 3.352766] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.373682] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.394796] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.397047] Linux agpgart interface v0.103
[ 3.398759] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.401599] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.401683] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.402809] mousedev: PS/2 mouse device common for all mice
[ 3.403847] rtc_cmos 00:02: RTC can wake from S4
[ 3.404477] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.404603] rtc_cmos 00:02: alarms up to one day, 242 bytes nvram
[ 3.405033] platform eisa.0: Probing EISA bus 0
[ 3.405108] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 3.405189] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 3.405267] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 3.405345] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 3.405423] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 3.405501] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 3.405579] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 3.405657] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 3.405735] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 3.405811] platform eisa.0: EISA: Detected 0 cards
[ 3.405898] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.406805] TCP: cubic registered
[ 3.406927] NET: Registered protocol family 10
[ 3.408167] mip6: Mobile IPv6
[ 3.408249] NET: Registered protocol family 17
[ 3.408351] mpls_gso: MPLS GSO support
[ 3.408762] Using IPI Shortcut mode
[ 3.409682] registered taskstats version 1
[ 3.411303] rtc_cmos 00:02: setting system clock to 2016-02-01 18:12:40 UTC (1454350360)
[ 3.411749] PM: Hibernation image not present or could not be loaded.
[ 3.412914] Freeing unused kernel memory: 668K (c1612000 - c16b9000)
[ 3.413071] Write protecting the kernel text: 4316k
[ 3.413375] Write protecting the kernel read-only data: 1388k
[ 3.486001] udevd[49]: starting version 175
[ 3.688736] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 3.691147] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 3.812470] via-rhine 0000:00:0d.0 eth0: VIA Rhine III (Management Adapter) at 0x1fa00, 00:0d:b9:0d:ca:44, IRQ 11
[ 3.813351] via-rhine 0000:00:0d.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1
[ 3.821953] SCSI subsystem initialized
[ 3.899407] ACPI: bus type USB registered
[ 3.899729] usbcore: registered new interface driver usbfs
[ 3.899900] usbcore: registered new interface driver hub
[ 3.908226] usbcore: registered new device driver usb
[ 3.919127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.947509] ehci-pci: EHCI PCI platform driver
[ 3.953863] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.955155] ohci-pci: OHCI PCI platform driver
[ 3.980303] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 3.980425] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.980828] ehci-pci 0000:00:0f.5: irq 11, io mem 0xefffd000
[ 3.984125] tsc: Refined TSC clocksource calibration: 498.050 MHz
[ 3.992137] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.992472] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.992553] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.992637] usb usb1: Product: EHCI Host Controller
[ 3.992708] usb usb1: Manufacturer: Linux 3.16-0.bpo.2-486 ehci_hcd
[ 3.992785] usb usb1: SerialNumber: 0000:00:0f.5
[ 4.006681] hub 1-0:1.0: USB hub found
[ 4.006801] hub 1-0:1.0: 4 ports detected
[ 4.030647] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[ 4.030762] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 4.031379] ohci-pci 0000:00:0f.4: irq 11, io mem 0xefffe000
[ 4.050936] libata version 3.00 loaded.
[ 4.103204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.103297] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.103381] usb usb2: Product: OHCI PCI host controller
[ 4.103453] usb usb2: Manufacturer: Linux 3.16-0.bpo.2-486 ohci_hcd
[ 4.103528] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.107871] hub 2-0:1.0: USB hub found
[ 4.109903] hub 2-0:1.0: 4 ports detected
[ 4.115137] pata_amd 0000:00:0f.2: version 0.4.1
[ 4.127712] scsi0 : pata_amd
[ 4.137090] scsi1 : pata_amd
[ 4.137672] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
[ 4.137749] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
[ 4.308408] ata1.00: CFA: ELITE PRO CF CARD 4GB, 20091113, max UDMA/66
[ 4.308497] ata1.00: 7847280 sectors, multi 0: LBA
[ 4.316121] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 4.324369] ata1.00: configured for UDMA/66
[ 4.324889] scsi 0:0:0:0: Direct-Access ATA ELITE PRO CF CAR 1113 PQ: 0 ANSI: 5
[ 4.327369] ata2: port disabled--ignoring
[ 4.374086] sd 0:0:0:0: [sda] 7847280 512-byte logical blocks: (4.01 GB/3.74 GiB)
[ 4.374445] sd 0:0:0:0: [sda] Write Protect is off
[ 4.374528] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.374713] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.378553] sda: sda1 sda2
[ 4.381145] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.392817] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.578567] usb 1-3: New USB device found, idVendor=058f, idProduct=6387
[ 4.578662] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.578745] usb 1-3: Product: Mass Storage
[ 4.578817] usb 1-3: Manufacturer: Generic
[ 4.578891] usb 1-3: SerialNumber: AMC00000003000002593
[ 4.607543] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 4.607922] scsi2 : usb-storage 1-3:1.0
[ 4.608660] usbcore: registered new interface driver usb-storage
[ 4.988105] Switched to clocksource tsc
[ 5.084475] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 5.155337] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.164566] aufs 3.16-20140908
[ 5.288385] loop: module loaded
[ 5.609130] scsi 2:0:0:0: Direct-Access Flash Drive AU USB20 8.20 PQ: 0 ANSI: 2
[ 5.614051] sd 2:0:0:0: [sdb] 31883264 512-byte logical blocks: (16.3 GB/15.2 GiB)
[ 5.614907] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.615049] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5.615940] sd 2:0:0:0: [sdb] No Caching mode page found
[ 5.616125] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 5.624719] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.872653] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.910527] aufs test_add:305:busybox[262]: uid/gid/perm //filesystem.squashfs/ 113/117/0755, 0/0/0755
[ 6.042093] sdb: sdb1
[ 6.051043] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 6.339993] random: nonblocking pool is initialized
[ 9.532979] udevd[570]: starting version 175
[ 10.086299] AMD Geode RNG detected
[ 10.188392] ACPI Warning: SystemIO range 0x00006100-0x000061ff conflicts with OpRegion 0x00006100-0x000061ff (\_SB_.GPIO) (20140424/utaddress-258)
[ 10.188593] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.188817] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
[ 10.188938] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
[ 10.208828] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 10.208933] ACPI: Power Button [PWRF]
[ 10.236674] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 10.236759] PCI: setting IRQ 10 as level-triggered
[ 10.237271] lxfb 0000:00:01.1: 8192 KB of video memory at 0xee000000
[ 10.337040] ACPI: AC Adapter [AC] (on-line)
[ 10.700542] fbcon: Geode LX (fb0) is primary device
[ 10.711144] Console: switching to colour frame buffer device 80x30
[ 10.720281] fb0: Geode LX frame buffer device
[ 10.773156] parport_pc 00:05: reported by Plug and Play ACPI
[ 10.773511] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.979110] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 11.252173] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[ 12.178682] ACPI: PCI Interrupt Link [LNKC] BIOS reported IRQ 0, using IRQ 10
[ 12.179044] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 12.235143] snd_ice1724 0000:00:0c.0: juli@: analog I/O detected
[ 39.982290] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 40.015092] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 42.074983] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 42.107895] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.