CNC mono chassis $71.50ea + shipping Utah

0 Members and 1 Guest are viewing this topic. Read 49924 times.

James Romeyn

  • Industry Participant
  • Posts: 3329
  • James Romeyn Music and Audio, LLC
    • James Romeyn Music and Audio, LLC
CNC mono chassis $71.50ea + shipping Utah
« on: 29 May 2012, 03:06 am »
For readers of the old thread: I'm adding $60 to my cost (deduct $60 from total cost for all chassis) as if I was also paying for delivery from Utah, as all others must pay.  This change makes the overall buy more equitable than earlier accounting where I saved this second shipping fee other were stuck paying. 

Silicon Ray RE2207:
http://www.siliconray.com/re2207-215x70x228-aluminum-enclosure.html

Group buy selling for my/our actual cost, MOQ (minimum order quantity) 20.

This thread is only to post quantity desired.  TrungT already made the CAD file (thanks TrungT) so please don't confuse this issue with any voting or suggestions, please. 

View and comment on the original design thread here: http://www.audiocircle.com/index.php?topic=106475.0

I'll request funds when we get to MOQ of 20.

Cost details for CNC precut chassis model RE2207 from Mike @ Silicon Ray in China.  20 chassis ship from China to me in Utah, then I ship immediately after arrival from Utah.

Chassis $49
Shipping each to me $15 (group buy discounted from $20)
$64 x 20 = $1280 subtotal
James Romeyn pays <$60> as if his 6 chassis shipped from Utah, $1220 subtotal
One time SR $10 handling fee = $1230/20 = 61.50 ea
Add $10ea SR CNC cutting fee $71.50 ea
Add shipping from me to you, discounted Endicia commercial 3rd party account via USPS Parcel Post, 4 or 5 lbs, estimate $15ea $86.50, $173/pr (this is not your actual final cost...rather than $15 estimate as above you'll pay me the amount printed on your shipping label which you'll confirm upon arrival...example: I confirmed 4 lbs to Florida = $12.88)

Add 3% Paypal.  Sorry I have Premier account.  This is not a gift.  Also if delivered to Utah add sales tax due.  I'm licensed, but actually tax is due whether you're licensed or not but that's another story.  The entire group would have to wait for a check to clear which is obviously impractical (even cashier's check will take several days out of state).         

Note, if you purchase direct yourself: No free CAD design, no $10 discounted CNC fee, no $5 discount per chassis shipping (see above) add $10-15 handling fee per order (only one time in this group buy), no credit $5 per black faceplate (credited for this Group Buy).  These discounts appear to more than cover our extra shipping fee from Utah.   

I'll ship via Endicia USPS Parcel Post, with 100% successful safe delivery record for our guitar accessory (hundreds shipped).

Please correct math if necessary.

Chassis is black.  Specify silver or black faceplate.  Black normally +$5 but no up-charge for this group buy.

Mike emailed:
Quote
I saw your post on audio circle. I think you should also mention that the custom laser engraving diagram is available now! everyone can have their own design on it. The laser engraving looks awesome on black anodized aluminum!  Logo engraving is $10 each.
 
See the photo I attached, you can post it on the GB thread.
 

Etching requires Coreldraw cdr file, 1:1 scale.       



No power switch.  Hypex SMPS600 is already fused. 
IEC: Parts Express
XLR: Neutrik female chassis mount, gold or silver contacts
Binding post holes: 10mm cut for Apex Jr. $4.59/pr short gold post with large bare wire hole (Apex said he has about 300)...if your preferred post requires smaller than 10mm hole you need a bushing/washer/spacer, if larger you must open the hole larger yourself.  Apex Jr posts:



My "lovely" pencil/graph paper diagrams, both to scale.  Chassis dimensions not identical because base is ID, rear panel is OD. 







Holler if you find an error or discrepancy.   

The post hole centers match the IEC fasteners.  Plus my fingertips are so big I can't even play a regular guitar neck, so I like the extra spacing.  Clearance to the mounting surface should be fine with your favorite footers.

BTW, I realize, if the NC400 moved upward a few mm there would be better clearance for two amps/one ps, but its really just a mono design and frankly, Scarlet, at this point, I really don't give a darn.... :lol: 

For optimistic free lunch crowd, this is for chassis only and nothing else. 


 

 


 

 
« Last Edit: 29 May 2012, 10:59 pm by James Romeyn »

mr_bill

Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #1 on: 29 May 2012, 03:36 am »
2 chassis with silver face plate.
Bill

rascal

  • Jr. Member
  • Posts: 65
Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #2 on: 29 May 2012, 04:23 am »
...
« Last Edit: 29 May 2012, 08:19 am by rascal »

St_PatGuy

Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #3 on: 29 May 2012, 04:45 am »
I am in for two with the silver face plate, please.

Thanks,
Sean

santacore

Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #4 on: 29 May 2012, 04:47 am »
2 please with the silver face plate.

John

James Romeyn

  • Industry Participant
  • Posts: 3329
  • James Romeyn Music and Audio, LLC
    • James Romeyn Music and Audio, LLC
Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #5 on: 29 May 2012, 04:48 am »
delete...
« Last Edit: 29 May 2012, 10:24 pm by James Romeyn »

Rclark

Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #6 on: 29 May 2012, 04:50 am »
2, silver please.

rascal

  • Jr. Member
  • Posts: 65
Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #7 on: 29 May 2012, 05:12 am »
Negative, unless I'm missing something.  In my accounting:
1. Everyone pays and everyone benefits equally $15 per chassis from SR in China to me in Utah (normally $20ea for non-group buy). 
2. I deduct $10ea to equalize the extra fee other buyers pay to get their chassis from me (estimate, each fee unique depending on geography).

Maybe you confuse 1 and 2 above?     


Yes I got confused- sorry I made a mistake  :oops:

You should be reaching MOQ by now...going ...going gone  :thumb:

I am doing my 3 channel in one case and will begin only later in July.

James Romeyn

  • Industry Participant
  • Posts: 3329
  • James Romeyn Music and Audio, LLC
    • James Romeyn Music and Audio, LLC
Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #8 on: 29 May 2012, 05:24 am »
Mike emailed:
Quote
Logo engraving is $10 each.

Man, like I want more work....Jan-Peter @ Hypex emailed permission to laser etch "Ncore" logo...as long as it's destined for Ncore innards....I requested and did not receive Ncore logo file.  Mike said OK as long as Hypex grants permission which they did.

I'm etching my guitar broker logo (I expect NC400 to pique the interest of high-end acoustic instrument owners).  Email me if you want to purchase the Ncore logo etched for $10ea, after which I'll request Jan-Peter again for the file.   

Rclark

Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #9 on: 29 May 2012, 05:31 am »
The Ncore logo on the outside of the case would be pretty snappy if you could pull that off.

orientalexpress

Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #10 on: 29 May 2012, 05:51 am »
i have to pass,i need to fit 2 nc400 to bridge my mono block,good luck


lapsan

James Romeyn

  • Industry Participant
  • Posts: 3329
  • James Romeyn Music and Audio, LLC
    • James Romeyn Music and Audio, LLC
Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #11 on: 29 May 2012, 05:58 am »
deleted, error
« Last Edit: 29 May 2012, 06:35 pm by James Romeyn »

orientalexpress

Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #12 on: 29 May 2012, 06:19 am »
Lapsan,
Do you employ one or two SMPS600 per each bridged channel?
if i could get away with one ,i do one.but which ever give me the most power.i got do a little more research.

lapsan

Rclark

Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #13 on: 29 May 2012, 06:23 am »
lapsan, please keep everybody informed, I think you might be the first one to bridge. I'm sure everyone would love to know what happens when you do it.

drmike

  • Jr. Member
  • Posts: 269
Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #14 on: 29 May 2012, 01:46 pm »
i would like 2 with silver faceplates.
thanks,
drmike

Atlplasma

  • Full Member
  • Posts: 963
  • Just off the boat
Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #15 on: 29 May 2012, 03:09 pm »
(Deleted by author.)
« Last Edit: 29 May 2012, 10:23 pm by Atlplasma »

Philistine

Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #16 on: 29 May 2012, 03:43 pm »
I'm in for two with black faceplates.
Thanks

roscoeiii

Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #17 on: 29 May 2012, 03:46 pm »
   

Warning: Total is already 14 or more (at least four sold not listed here).  Train leaves this station in 6 or less sales. 


Instead of calling the buy done at 20 orders, would it be possible to give a date at which orders will close? I think having a date that a decision needs to be made by would be helpful to many on the fence like myself.

James Romeyn

  • Industry Participant
  • Posts: 3329
  • James Romeyn Music and Audio, LLC
    • James Romeyn Music and Audio, LLC
Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #18 on: 29 May 2012, 06:33 pm »
...This thread is only to post quantity desired...please don't confuse this issue with any voting or suggestions, please...I'll request funds when we get to MOQ of 20....

Please observe and respect the OP.  No voting, no suggestions.  With all due respect, please post only quantity and face plate color or ignore this thread and start your own if so inclined.  I've no intention of herding cats.

In the firehouse was a sign-up board for lunch and dinner.  Members would occasionally ask the cook what was on the menu before selecting to be in or out.  The cook would sometimes reply clearly and loudly for all within ear shot to hear, "You're in or you're out!" 

At least with this group buy you know exactly what's on the menu and the cost!     
     

ted_b

  • Volunteer
  • Posts: 6345
  • "we're all bozos on this bus" F.T.
Re: CNC mono chassis $71.50ea + shipping Utah
« Reply #19 on: 29 May 2012, 06:47 pm »
Please observe and respect the OP.  No voting, no suggestions.  With all due respect, please post only quantity and face plate color

?  then what, exactly, does


Holler if I missed anything. 


mean?