A quick note from Fallen Enclosures

Outofthewoods · « **on:** 7 Jun 2010, 10:40 pm »

Hello Everyone!

I just wanted to put this out there to let everyone know where we're at.

One word, SWAMPED!!!

Many of you are waiting for pricing information LS4/6/9's, Sealed Servo Subs, N3's, OB-5/7's, A/V 1RS, flat packs, raw enclosures...

I'm working my rear off trying to get everything priced while at the same time building orders and developing new enclosure designs (I've got some guaranteed "head turners" in the works).

Please continue to be patient as we get everything figured out.

If it ever seems like we've vanished it's only because I'm too busy to sit down and post.

Until God says otherwise, Fallen Enclosures isn't going anywhere!

Thanks,

Ruben

BTW, since I know how much you all like pictures, here's a Pure Black N3S Center that I recently built for a customer.

chip · « **Reply #1 on:** 7 Jun 2010, 11:59 pm »

Those look great....keep up the good work.

Waiting for some pricing info to see which route I want to go.

Rclark · « **Reply #2 on:** 8 Jun 2010, 12:54 am »

me too, I'm interested in pricing for both unfinished flatpack and finished for N3, also available textures and colors.

Bill Baker · « **Reply #3 on:** 8 Jun 2010, 02:53 am »

Absolutely stunning work

praedet · « **Reply #4 on:** 8 Jun 2010, 11:33 pm »

Ruben, should we pm you for prices on flatpacks and finished enclosures?
Thanks,
Ted

Sparky14 · « **Reply #5 on:** 9 Jun 2010, 01:56 am »

Man, those are purdee!

I don't want to know your prices. I'm happy with my N2X. I'm happy with my N2X. I'm happy with my N2X (gotta keep saying it)

ok...I want to know your prices on N3S

Outofthewoods · « **Reply #6 on:** 11 Jun 2010, 07:23 am »

Thanks for all of the compliments guys!

Since I'm starting to get a little bit overwhelmed by all of the interest, I've recruited some extra help to assist me in getting better organized and to help keep me on track. I've gotten a little too scattered these past couple of weeks.

I will be updating everyone who is waiting for numbers within the next couple of days.

Thanks again for your patience and for bearing with us through this sometimes difficult learning curve.

Ruben

Outofthewoods · « **Reply #7 on:** 11 Jun 2010, 07:31 am »

Quote from: praedet on 8 Jun 2010, 11:33 pm

Ruben, should we pm you for prices on flatpacks and finished enclosures?
Thanks,
Ted

Hi Ted,

PM's work fine for me!

Thanks,

Ruben

Outofthewoods · « **Reply #8 on:** 16 Jun 2010, 05:25 am »

Okay, I think we've responded to all email and PM's!!!

If we somehow missed you please feel free to thump me over the head via PM.

Thanks Again!

Ruben

chip · « **Reply #9 on:** 16 Jun 2010, 05:45 pm »

When do you think you might have a price list available for all options that you will be offering?

Thanks for the PM with the update.

dBe · « **Reply #10 on:** 16 Jun 2010, 06:34 pm »

Quote from: Outofthewoods on 11 Jun 2010, 07:23 am

Thanks for all of the compliments guys!

Since I'm starting to get a little bit overwhelmed by all of the interest, I've recruited some extra help to assist me in getting better organized and to help keep me on track. I've gotten a little too scattered these past couple of weeks. I will be updating everyone who is waiting for numbers within the next couple of days.

Thanks again for your patience and for bearing with us through this sometimes difficult learning curve.

Ruben

Ruben,

I completely understand what it is like to get swamped and need help. I'm not a multitasker and tend to have target fixation.

Your cabinets are stupid pretty:

they make me go-DUUHHH!!! You do AWESOME work!

I hope nothing but the best for you. Keep it up.

Dave

Outofthewoods · « **Reply #11 on:** 22 Jun 2010, 02:42 am »

Quote from: dBe on 16 Jun 2010, 06:34 pm

Ruben, I completely understand what it is like to get swamped and need help. I'm not a multitasker and tend to have target fixation.

It's definitely a tricky balancing act, isn't it?

Quote from: dBe on 16 Jun 2010, 06:34 pm

Your cabinets are stupid pretty: they make me go-DUUHHH!!! You do AWESOME work! I hope nothing but the best for you. Keep it up.

Dave

Thanks a lot Dave!

We'll surely keep it up!

Ruben

Outofthewoods · « **Reply #12 on:** 22 Jun 2010, 04:41 am »

I figure it's worth a shot to post this here.

If you called and left me a message last week regarding N3's and Super V's please call again, or shoot me a PM here. I can't make out your name or number on the machine.

Thanks!

Ruben

HT cOz · « **Reply #13 on:** 27 Jun 2010, 08:03 pm »

Ruben let me know if you didn't get a PM from me?

Rclark · « **Reply #14 on:** 28 Jun 2010, 03:17 am »

Yeah, I also sent a PM about flatpack order.

Outofthewoods · « **Reply #15 on:** 30 Jun 2010, 07:17 pm »

Yep, got them.

Right back at cha!

Thanks!

Ruben

spuzio · « **Reply #16 on:** 27 Jul 2010, 04:19 pm »

Your inbox is full so i thought i would ask here...

I am interested in a couple of flat packs if you can provide me a quote.

I am looking for V-2 and the AV 1RS out of MDF.

Thanks!

Steve

dvenardos · « **Reply #17 on:** 28 Jul 2010, 04:44 am »

Hey Ruben,
Is there some reason that you can't post a price list somewhere? You can always change it as the need arises and it would really cut down on your PMs. Just because I am curious and after seeing your pics I am kind of embarrassed about my own "work".

Best,
Don

Outofthewoods · « **Reply #18 on:** 28 Jul 2010, 04:15 pm »

Hey Guys,

Sorry about the PM box.

I have not been on the forum since last week. I ran into some finish issues and have had to focus 100% of my energy on getting back on schedule.

If my message box happens to fill up again you can always reach me by email. My email address is listed in my profile.

I will try to respond to everyone's posts by late tonight.

Thanks,

Ruben

cmryan21 · « **Reply #19 on:** 2 Aug 2010, 08:22 pm »

Fellas, roughly how long does Reuben generally take to respond to pm's or emails? Is a week or more typical? Looks like he's busy as can be but I was just trying to find out some basic prices.