I stumbled upon a website that sells many different electronics items. One such item is a SurgeX 10 outlet 15 amp brick with EMI/RFI filtering. I do not know enough to compare the unit I found against something like the MajikBUSS. I'm wondering if anyone here has an opinion on the following specs and how they might compare to the PI Audio MajikBUSS (or even the MiniBUSS).
Link to the item in question:
http://www.focusedtechnology.com/sa-1810-surgex.htmlSPECIFICATIONS
Load Rating: 15 amps @ 120 volts;
Power Requirement (no load): 10 watts
Surge Let-Through Voltage (6000-volt surge): 0 volts
UL 1449 Adjunct Classification Test Results:
1000 surges, 6000 volts, 3000 amps, B3 pulse;
Measured suppressed voltage: 170 volts; no failures
Federal Guidelines: Grade A, Class 1, Mode 1 (CID A-A-55818)
EMI/RFI Filter, Normal Mode (50-ohm load):
40 dB @ 100 kHz; 50 dB @ 300 kHz;
50 dB @ 3 MHz; 50 dB @ 30 MHz
EMI/RFI Filter, Common Mode (50-ohm load):
18 dB @ 300 kHz; 30 dB @ 1 MHz;
50 dB @ 5 MHz; 50 dB @ 20 MHz
Maximum Applied Surge Voltage: 6000 volts*
Maximum Applied Surge Current:
Unlimited, due to current limiting*
Maximum Applied Surge Energy:
Unlimited, due to current limiting*
Endurance (C62.41-1991 Category B3 pulses):
1 kV>500,000; 3 kV>10,000; 6 kV>1000
Dimensions: 4.0" H x 10.2" W x 4.2" D (10.2 x 25.9 x 10.7 cm)
Weight: 8.5 lbs (3.8 kg)
Temperature Range: 5º to 35º C
Humidity Range: 5% to 95% R.H., non-condensing
Agency Listings: ETL and cETL (UL 1449, 2nd edition;
CSA C22.2 No.8-M1986, R2000)
*1.2 x 50 µs pulse, industry standard combination wave surge, as per IEEE C62.41
Specifications subject to change without notice. SurgeX is a division of Electronic Systems Protection, Inc.
This product, including its components and/or processes carried out thereby, are covered by one or more of the following: U.S. Pat. No. 4,870,534. 4,870,528. 6,728,089. 6,744,613. 7,068,487. Can. Pat. No. 1,333,191. 1,332,439. Other Patents Pending.