Altec Valencia's

I updated my Valencia's High Frequecy section, from the Carvin HF drivers to a pair of Altec 806A drivers. So here are some pics from that move. Also NEW...replaced Goodman/Lafayette 15's with Altec 421's reconed as 416-8A's. The 421 are much more efficent than the Goodmans
Thumbnail for 5 Ready to Open for 807As - Replacement complete this one back in place. Sweet music going via The Train and my SB3... Loving it
Thumbnail for 4 Ready to Open for 807As - Closer look with Altec 806a on the 811b
Thumbnail for 3 Ready to Open for 807As - Opened and looking at the Woofer Lafayette/Goodman SK-215 reconed with concentric cone no horn. The Carvin on the 811b horn
Thumbnail for 2 Ready to Open for 807As 1 - Laying on a piece of carpet to open the back
Thumbnail for 1 Altec Valencias in the room
Thumbnail for 91 Valencia 5 - Now Valencia with 421w/416 cones and 807A Drivers. on top is my SB3 a stereo 12ax7 pre w/tone cntrls and little 24/96 DAC, with "The Locomotive" driving... Sweet Sounds
Thumbnail for 9 Valencia 1 - This is the second mod to the Valencias . The first mod was replacing the Cavin HF drivers with Altec 807-8As. Here you see the Concentric curve cone of the Goodman/Lafayette Alinco 15"ers the recone 421's replace. The Goodmans although less efficent when pushed were very, very good !
Thumbnail for 8 Valencia 4 - With Goodman's in
Thumbnail for 7 Valencia 3 - Valencia opened showing Goodmans
Thumbnail for 6 Valencia 2 - With Altec 421's ready to go in
Thumbnail for 10 Valencia and the Train w/Tone preamp and DAC
Thumbnail for 11 Valencia w fronts
(Prev) | Page 1 | Next »