Hi Dave, Dany and all.
Just want to share with all of you my satisfaction with my Majik Buss
from Dave that I bought from Danny at 595 USD five years ago
with other GR Research stuff.
First, I must say that I don't have a dedicated wall outlet.
The outlet is 230V/15Amps.
I have a Vietnamese power auto transformer/stabilizer that is rated at 2KVA
and it got 120 and 230V. outputs.
(The make is: Robot)
(Input voltage can vary from 160V to 250V.)
All the items listed below are connect directly to the Majik Buss
and some are connected via one power strip.
The Majik Buss is connected to the 120V. stabilized output from the Robot
and everything out of the Majik Buss is on 120V.
One exception is my Rega P3 turntable that is 230V.
and is connected directly to the Robot 230V. outlet.
Bellari VP129 Phono stage.
Decware SE84C+ SET amplifier.
Bottlehead Crack headphone amplifier.
Rega Apollo CD player.
Two (02) GR Research SA-1 250W. ss plate amplifiers
I even have a small ring type fluorescent light
and some low wattage ambiance lamps.
All those noisy items are on my Majik Buss.
And I almost forgot to mention,
the Robot auto transformer stabilizer can produce some noise
from it's electronic PCB when voltage fluctuate.
I've never listen to my system without the Majik Buss
therefore I don't know what my system would sound like without it.
I would suspect that I would not be as good sounding as it is now.
Just wanted to share with you
and let you know that Dave and Danny are good guys,
of course there are other good guys on AC,
but for this post I mention them,
other posts I will mention other guys.
Thanks.
Guy 13