Custom transformers

0 Members and 1 Guest are viewing this topic. Read 6530 times.


Custom transformers
« on: 1 May 2009, 12:49 am »
Custom power and output transformers made by Trafomatic.

Estimated ship date: June 15, 2009

Accepting orders by May 22.



Re: Custom transformers
« Reply #1 on: 1 May 2009, 06:10 pm »
For those considering any of these, I ordered from Boris before and the transformers were exactly to spec and very nicely done. Great value.  :thumb:


Re: Custom transformers
« Reply #2 on: 2 May 2009, 02:07 am »
Thanks Mike,

I'm glad you like them  :thumb:



Re: Custom transformers
« Reply #3 on: 3 May 2009, 07:03 pm »
Lower cost due to the stronger US Dollar!  :thumb:

Last order was priced at approximately
Euro = 1.6 USD

This time the exchange rate is better than
Euro = 1.4 USD

Savings of more than 10%.

We are passing this benefit to our customers worldwide (even our EU customers will see a lower price).


Re: Custom transformers
« Reply #4 on: 13 May 2009, 12:56 am »
Just a little bump.


  • Newbie
  • Posts: 5
Re: Custom transformers
« Reply #5 on: 4 Jan 2013, 06:05 pm »
Dear sir,

would u please tell me if you would be willing to wind an output transformer dedicated to my single ended solid state amplifier ?

Here are wanted specifications :

   SE output transformer               
    Solid state amplifier
   Double C         core       
   Hi-B  < 0.25 mm   Type & Lamination thickness      
   4  Ohm         primary impedance      
   2 Hy @ 1300 mA   primary inductance      
   < 0.35 mHy      Leakage      
   0.5 T         Flux density  (DC)      
   0.6 T         Flux density  (AC)      
   < 0.5  Ohm         primary resistance      
   8  Ohm         secondary impedance      
   < 0.5  Ohm         secondary resistance      
   Yes         Air gap   
   1300 Ma         DC on primary   
   Bi filar   Winding    
            primary / secondary   
   15 Hz  - 90 Khz         Bandwitdh   
   20 watts         Full power @ 20 Hz   
   Open Frame         finition   

Regards 'n' happy new year from France



  • Volunteer
  • Posts: 16082
  • To whom more was given more will be required.
    • Never go to a psychiatrist, adopt a straycat or dog. On the street they live only two years average.
Re: Custom transformers
« Reply #6 on: 4 Jan 2013, 08:40 pm »
Looks a great iron manufacturer for tube amps.
Thanks for posting :thumb:


  • Industry Participant
  • Posts: 5183
  • Rollo Audio Consulting -
Re: Custom transformers
« Reply #7 on: 24 Jan 2013, 06:28 pm »
   I can tell you that Boris is a great person to deal with. Not only does he offer wonderfull product he is a good guy to boot. We are not Vista dealers so this is from the heart.



Re: Custom transformers
« Reply #8 on: 26 Jan 2013, 03:04 am »
Oh Charles, you are way too kind!

It makes me very sad that Trafomatic decided to stop making custom transformers for DIY market. They got very busy, costs went up and they could not allocate resources to support high mix, low volume production.