[youngho]

Hi, I was wondering what you meant about the backing (plywood panel?) and how you used the FSK, i.e. facing is toward the room or away from the room, etc? Thanks

[pjchappy]

Sorry about that.  By backing, I do mean FSK.  All panels w/ FSK have the FSK side facing the wall -- 2 on the front wall; 2 behind the listening position; and the panel on the floor and the one I can put in front of the TV or in front of the TV stand have the FSK too, which I have (so far) placed facing the floor and TV. 

So, in simpler terms, the FSK faces away from the room.

The 2 corner boxes and the 2 at the first reflection points on the side walls do not have FSK.

[oneinthepipe]

I got 192 sq. ft. of 703 (without backing) and 48 sq. ft. of 703 (with backing) for $214.

In the Boston area, OC 703 w/o FSK is $86.XX for a "case" of (12) 2'X4'X2" sheets. 

[pjchappy]

Which is about $12 more than I paid.   

[oneinthepipe]

Which is about $12 more than I paid.   

Everything is more expensive in Boston! 

[Stylus]

Which is about $12 more than I paid.   

Everything is more expensive in Boston! 

Try California, mine was a little over a hundred!  Still a lot cheaper than online considering shipping though!

[pjchappy]

Here are some pics. . .

Behind listening position:


Front right (obviously, still need to cover the 1' x 4' x 6" bass trap):


Right:


Front left:


Left:


Above window - Eight Nerve seem(directly in between speakers; will replace with two 1' x 4' x 4" panels):


Right corner - Eight Nerve triangle (have in all 4 corners):


From listening position:



Construction details (the other panels have 2" holes on all 4-sides, versus the slits on the bass traps):

[oneinthepipe]

Your room looks very good, pjchappy.  Nice job.

[Stylus]

Well done, looks good! 

[pjchappy]

Thanks!  Just need to take an iron to the corner folds and maybe down the middle.  Will build 2 more over the next few days (two 1' x 4' x 4").

Won't be able to take measurements until later this week, as I found out the disc I need for my laptop is on backorder.  If the disc doesn't work, I'll need a new HD.

[pjchappy]

Well, I'm still without my laptop, so I can't take measurements, yet.  However, the backup disc shipped and if it arrives tomorrow, I will FINALLY be able to take new measurements.  (well, that is if I don't actually need a new HD)

This weekend, I will hopefully get to the last 2 panels (two 1' x 4' x 4") for above the window, also.  Too much stuff came up, though. . .so I have a feeling that won't happen.