AudioCircle
Industry Circles => GR Research => Topic started by: mboxler on 23 Nov 2022, 03:37 pm
-
Missing one, and it kinda bugs me. Anyone know what it is and where I can get one?
Mike
(https://www.audiocircle.com/image.php?id=246841)
-
Looks like a 2-56 Allen head. About 1/2" long?
-
Looks too small to be a 4-40.
https://www.ebay.com/itm/155202369076?hash=item2422c83634:g:pKMAAOSwmehjQ8t7&amdata=enc%3AAQAHAAAA4O3YlvYVQJoRzML0o%2B3rNWwVE8gSwifIdMfzCrZjmVPIgXhRMSdR5e5nmqYqLou5qthxAJMA%2Bjuhj5WApZACMUevcdNk75bm5GqvKihmCbK%2F0E6KcMZpOINMV6pYs%2BpVlhydraNfWcdjTZKefjE6NULYrl%2F71%2Ffya1%2FCtvFbCHz4gBVyILa0QWjHJhAOYwSDn9a4nO%2F9btcl%2FBw2OsfPXu99F%2F0UFmmaAb%2FKcUF6%2FRfoAbN%2FSF0ZrHGJkdU6swtiZWZQV60YSIfPok6Co2E4tDlkYsgQqCzZ56qIQ51KiXBy%7Ctkp%3ABFBM0Oyp25Rh
Send me one and I'll check the thread and send you back a pair if I have it. I have 2-56, 4-40, etc in stainless. Really hard to find at the big box stores. Maybe ACE.
-
Looks like a 2-56 Allen head. About 1/2" long?
5/8" from base of screw to end. I'll check Ace. Maybe I'll get lucky.
Thanks
-
It measures 2.15 mm in diameter and 19.63mm long (20mm) the thread pitch is metric 0.45 matches as I look under the microscope. My Metric thread Pitch gauge only goes down to 0.45 and it could be 0.40 which is very close in size. So your best bet is to look on eBay, or buy 6 screws that are similar.
I’m thinking it’s M2 0.40 x 20mm. Good luck
Link: https://www.ebay.com/itm/132318243973?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=zRMH5lUdRle&sssrc=2349624&ssuid=jgiqrzzKRsi&var=&widget_ver=artemis&media=COPY
(https://www.audiocircle.com/image.php?id=246861)
-
I might have one. I will have to bring one of my remotes over and pull one out to check it.
-
5/8" from base of screw to end. I'll check Ace. Maybe I'll get lucky.
Thanks
Definitely worth a shot. I’m pretty sure I’ve seen something VERY similar at my local Ace.
-
Those small bolts will be available at your local hobby shop (if you have one). Very common in model aviation and cars.
J.P.