0 Members and 1 Guest are viewing this topic. Read 6479 times.
Yep, lots of stuff on ebay, but I hope his heater switch is not $13. Of course, I do not think he will need a 3PDT. I say all of this without actually seeing a schematic. Genius or fool
Hi Jeff,On that links you post on the power on switched.How much is the current I should look for a power on switch?Thanks
If you haven't ordered a switch yet, pretty much anything will do. Just get a standard 10A 125V and don't worry about it too much Just make sure it has pins for both the HOT and NEUTRAL connections.One of these would do: http://ca.mouser.com/ProductDetail/CHERRY/LRA32H2FBBNN/?qs=sGAEpiMZZMtNT9UGfLL4eEXUF0YHaQ0Q3eDWqeajEQc%3d
Thanks for help I appreciated.My home is 220V, I understand I must order 2 poles switches.I like some old stile toggle and switches that use a round hole to easy mounting.Do you recommend switches with light/filaments?
My home is 220V, I understand I must order 2 poles switches.I like some old stile toggle and switches that use a round hole to easy mounting.Do you recommend switches with light/filaments?
With tubes, who needs lights... This will be more than enough: http://www.digikey.com/product-detail/en/GTS448F101AHR/CWI300-ND/3193537 or http://www.mouser.com/ProductDetail/CW-Industries/GTS448F101AHR/?qs=%2fha2pyFadug7Qn52ZZITBa9Dk%2fa5LNGtTIrVOxRRbh7PGFKZB1BO5Q%3d%3d