Introducing - Sweet Spot Reveal "Silver" Interconnects!!! DEMO TOUR REQUEST...

Sonny · « **on:** 20 Jun 2010, 05:25 pm »

Hi there, been working on a newer design since I know many out there are loving the old model as well. So, here is the Reveal "Silver"! Still solid core copper, but silver plated! Now you still get the beauty and body of copper, but with the extended details and speed of "silver"!

Solid Core Copper / Silver Plated / Teflon Insulated!!!
Here's the reviews (by AuCirlers) of the old "reveal" copper
http://www.audiocircle.com/index.php?topic=50447.0

I would love to send a pair of these out for a demo / tour....if anyone is interested, please let me know!

Thanks...
Tuan

here's a picture or two!

eclein · « **Reply #1 on:** 20 Jun 2010, 07:49 pm »

Tuan- If you send them out toward East Coast I'd be interested in checking them out.
Ed L.

konut · « **Reply #2 on:** 20 Jun 2010, 09:05 pm »

I'd like to try them out. PM sent.

danvegso · « **Reply #3 on:** 20 Jun 2010, 09:12 pm »

Hi Tuan,

Ditto on the East Coast deal.... I'd be more than happy to give them a listen. I've crafted quite a few of my own (of varying materials/designs), and prefer them to many commercial products- even the highly touted high-priced ones.

Thanks for the very generous offer! (PM sent with details)

Dan

Question: will you be breaking/burning them in before shipping?

Sonny · « **Reply #4 on:** 21 Jun 2010, 05:45 am »

Guys, thanks for the great enthusiasm...
Seems like there are three so far...what I will do is send out one pair to the following:

Ed
Ted
Dan
others..

All I ask is that the first person send it to the next and so on....is that ok?
The pair I currently have is about 20" long, is that long enough for you guys?
I think the best thing is to just send one pair so you can evaluate with only change at a time.

So, I will send it out to Ed first, since Ed was first to reply. From there, each will get a week, then send off to the next (Ed to Ted, Ted to Dan). Just contact me so I can give you the address for the next person. I hope this is ok!

The last person sends it back to me...

I will send the pair out, fully burned in, tomorrow to you Ed.

Thanks
Tuan

eclein · « **Reply #5 on:** 21 Jun 2010, 09:54 am »

Very good...Tuan. I look forward to checking them out.
Ed

etcarroll · « **Reply #6 on:** 21 Jun 2010, 11:02 am »

I'd like to hear them as well.

Gene

danvegso · « **Reply #7 on:** 21 Jun 2010, 12:08 pm »

Great, Tuan! Thanks!

I'll be eagerly awaiting them....
Also, thanks for burning them in-that'll save a lot of time and present them at their best.

Dan

Gopher · « **Reply #8 on:** 21 Jun 2010, 01:32 pm »

I'd like to join this tour, so long as as it stays domestic.

Sonny · « **Reply #9 on:** 21 Jun 2010, 04:28 pm »

List updated as follows:

Ed - June 25th (sending out today/tomorrow)
Ted - July 2nd
Dan - July 9th
Gene - July 16th...and so on...

I hope it's ok to assume that a week is plenty of time?
Also, please be sure to handle the I/C at the plug/connectors and try not to bend the cables...

Thanks and I look forward to the feedback/comments!
Tuan

eclein · « **Reply #10 on:** 21 Jun 2010, 04:36 pm »

Sounds good!! Thanks
Ed

jtsnead · « **Reply #11 on:** 21 Jun 2010, 05:58 pm »

I have tried all silver, went back to copper
I would like to try a silver plate wire
on my phono stage, will send pm

Jerry

Sonny · « **Reply #12 on:** 21 Jun 2010, 06:04 pm »

Jerry, you are added! Thanks...so new list as follows:

Ed - June 25th (sending out today/tomorrow)
Ted - July 2nd
Dan - July 9th
Gene - July 16th
Jerry -
Fred -

konut · « **Reply #13 on:** 21 Jun 2010, 10:30 pm »

Looks good to me! In the interest of full disclosure, do you have any measurements with regard to resistance, inductance, and capacitance? With cables as short as 20" it shouldn't make a difference but to those who have tube gear it might be important.

Sonny · « **Reply #14 on:** 21 Jun 2010, 11:11 pm »

Quote from: konut on 21 Jun 2010, 10:30 pm

Looks good to me! In the interest of full disclosure, do you have any measurements with regard to resistance, inductance, and capacitance? With cables as short as 20" it shouldn't make a difference but to those who have tube gear it might be important.

Unfortunately my "multi-meter" is not accurate or sensitive enough to make this measurement, but I can take it and list the results for you if you'd like.

I am using it from my DIVA Audio MM phono with Step up with no issues, but then again, I wouldn't expect any...

Tuan

Sonny · « **Reply #15 on:** 22 Jun 2010, 02:29 am »

Ok, so I measured the Resistance and Capacitance of the 22inch, end to end...

For what it's worth...

R= 0.01 - 0.03 ohms (pin/pin)
C= 0.175 nF (pin/shield)

don't know how accurate that is...

konut · « **Reply #16 on:** 22 Jun 2010, 02:46 am »

Thanks!

Sonny · « **Reply #17 on:** 22 Jun 2010, 06:11 pm »

Gopher and Gene, PM Sent...I needed your addresses...

I/C is on it's way to Ed!

Thanks all and I loo forward to your comments!

Tuan

eclein · « **Reply #18 on:** 22 Jun 2010, 06:12 pm »

Cool!!!

eclein · « **Reply #19 on:** 24 Jun 2010, 10:44 pm »

Got'em...will enter them in the fray tomorrow!!!