Home
Circles
Gallery
Systems
Calendar
About/Help
Login
Register
Gallery
»
Browse gallery
»
Albums by Lost81
»
Treble & Midrange AKSA 100W Nirvana Modules
Gallery
Browse gallery
Random albums
I'm Feeling lucky
Up to Albums by Lost81
Treble & Midrange AKSA 100W Nirvana Modules
2 AKSA 100W Nirvana modules optimized for 110Hz and up...
Monoblock #1. Elna Cerafine 100uF 100V replacing the stock capacitors (mounted outboard with zip ties and hot glue). A 0.04" drill bit works perfectly to fit the leads of this larger capacitor. Watch the polarity!
Closer look at Monoblock #1. You will need to enlarge the holes to fit the solid core 18AWG leads of the V-Cap. A needle file works best. Hint: scrap some of the solder mask off to create a larger solder pad for a more solid connection.
Monoblock #2. One cap is taller than the other due to a mistake bending the leads. Decided that an extra 5mm is not worth risking fracturing the solid core wire by re-bending it by 90 degrees.
Closer look at Monoblock #2. Ground (green lead of the V-Cap) is closer on the left for both capacitors. I.e. lower impendence path to ground. Refer to your circuit schematic).
(Prev) | Page 1 | (Next)
View slideshow