Pairing remote with epot3max

0 Members and 1 Guest are viewing this topic. Read 1364 times.

glynnw

  • Full Member
  • Posts: 989
  • I have tin ears.
Pairing remote with epot3max
« on: 29 Jan 2021, 08:27 pm »
Can you direct me to directions for pairing remote with latest epot3max?  I have looked and tried instructions for V2 but no success.

tortugaranger

  • Facilitator
  • Posts: 1746
  • Handcrafted high performance audio
    • Tortuga Audio
Re: Pairing remote with epot3max
« Reply #1 on: 29 Jan 2021, 09:03 pm »
Can you direct me to directions for pairing remote with latest epot3max?  I have looked and tried instructions for V2 but no success.

The pairing process is essentially the same for all models. It only works with the Silver metallic Apple remote.

1) Turn on the preamp via press/release of the encoder pushbutton
2) Then press/hold in the encoder pushbutton for 20+ seconds at which point the preamp enters pairing mode
3) Then press any button on the remote but recommend you press the center/enter button

That's it. At this point the preamp should respond to the remote.

It's described in our online documentation: https://tortugaaudio.com/docs/apple-remote-pairing/

Let me know if this doesn't work but we use this procedure almost every day so I know it works if the procedure is followed.

glynnw

  • Full Member
  • Posts: 989
  • I have tin ears.
Re: Pairing remote with epot3max
« Reply #2 on: 29 Jan 2021, 09:52 pm »
Worked as advertised!  Thanks, as always.  I am convinced that this latest model sounds better than the previous ones.  Anyone else feel this way?