AudioCircle
Industry Circles => Bryston Limited => Topic started by: Christo22 on 13 Sep 2020, 06:53 pm
-
How do you remove the front panel in oder to change the jumper?
I unscrewed the top.
Front panel moves but it seems to be locked somewhere under the amplifier...
Any idea?
-
How do you remove the front panel in oder to change the jumper?
I unscrewed the top.
Front panel moves but it seems to be locked somewhere under the amplifier...
Any idea?
Hi - are you sure you have to remove the front panel? Did you contact Mike at Bryston?
james
-
Just finished.
Easy stuff.
1 - Put the amplifier on its rear handles on soft material...
2 - Unscrew TOP & BOTTOM panels.
3 - Disconnect the LED from motherboard (FLAT WHITE WIRE).
3 - Unscrew the FRONT Panel from aluminium rail (You'll see it easily).
4 - Move the jumper to BLUE.
5 - Put back together and test.
And... while I was there... I dust it off a little 8)
Just like a brand new one! ;)
-
Just finished.
Easy stuff.
1 - Put the amplifier on its rear handles on soft material...
2 - Unscrew TOP & BOTTOM panels.
3 - Disconnect the LED from motherboard (FLAT WHITE WIRE).
3 - Unscrew the FRONT Panel from aluminium rail (You'll see it easily).
4 - Move the jumper to BLUE.
5 - Put back together and test.
And... while I was there... I dust it off a little 8)
Just like a brand new one! ;)
Congrats !!!
-
Who in their right mind would voluntarily want to have blue LEDs in his/her listening room? :o Beats me!
-
Funny guy... :roll: