[James Romeyn]

Silicon Ray said this offer closes 10 June 2012. 

[santacore]

I'm still waiting for a response from 2 days ago. Hopefully I can place an order soon!

[James Romeyn]

Are you in the 48 states?  If yes, the only unknown variable, AFAIK, is $10 to $15 fee per order depending on geography, which IIRC you can figure out at the site.  I can itemize every other fee if you list your order.

Mike's off weekends, so I presume you'll hear from him shortly (it's Tuesday morning there now).     

 

[santacore]

Thanks James. I'm in California and just want 2 plain silver face chassis with the CNC work done. No artwork is necessary.

[James Romeyn]

Thanks James. I'm in California and just want 2 plain silver face chassis with the CNC work done. No artwork is necessary.

Here ya go:
RE2207 chassis silver $49ea
CNC quote "Romeyn Ncore" $10ea
Shipping $25ea (4 or less)
Subtotal $84ea x2 $168
My handling fee is lowest to 48 states, $10 to Utah, you're closer to China so must be the same $10
$178 + 3.5% Paypal (6.23) = $184.23

I think I posted his Paypal email above (different from his regular email address).

Do you have your amps already?

 

[James Romeyn]

Here's the Ncore logo laser engraved on the black face plate (or "face panel" as Mike calls it...disregard my name lower right corner)

[santacore]

James, thanks for the extremely quick response!!!!

I just placed my order using the amount we both came up with. Hopefully we'll all get our cases soon!

John

[worldcat]

Is this box big enough to hold the soft button board too?

[James Romeyn]

Is this box big enough to hold the soft button board too?

No idea.  What is "the soft button board?"  My kindergarten style drawing in the OP is to scale.  Post the dimensions and I'll check fit on my drawing.  There's just almost (marginal) space for a second amp board.     

[bhakti]

I'm guessing he/she is referring to the Hypex soft start module.  But, I believe that there is soft start functionality built into the power supply so this may not be needed.

[jtwrace]

I'm guessing he/she is referring to the Hypex soft start module.  But, I believe that there is soft start functionality built into the power supply so this may not be needed.

That is correct.

http://www.diyaudio.com/forums/vendors-bazaar/190434-hypex-ncore-432.html#post3048646

[Will2]

Hi,

Sorry if I've missed something in the above posts but I think I need a cost so I can send a PayPal instruction.  What I'd like to get is:

2 units
In black
Engraved with logo
Shipping to Boston

and just to confirm - I send PayPal to the address above, reference this GB and I'm good?  From there, where do I send shipping instructions?

Sorry if I'm creating work by asking stupid questions.

[Airborn]

I was wondering the same, so I sent the attached email to Mike at Silicon Ray, but no answer yet?

Can you please confirm the prices below are correct?  Here is what I want:

1.   RE2207 chassis Black frontpanel -  $49.00 each
2.   CNC cut out quote "Romeyn Ncore"  - $10.00 each
3.   Shipping - $25.00 each (4 or less)
4.   Ncore engraved Black frontpanel - $10.00 each
5.   Subtotal $94.00 each x2 =  $188.00 total
6.   Handling fee to Las Vegas, Nevada, USA - $10.00
7.   Final Total Cost - $198.00 + 3.5% Paypal ($6.93) = $204.93

[James Romeyn]

Will,
Replies inserted below.
Jimbo

Hi,

Sorry if I've missed something in the above posts but I think I need a cost so I can send a PayPal instruction.

Both the following worked for me.  Mike of Silicon Ray:
Correspondence email: sales@siliconray.com
Paypal email: newtonian@263.net

RE2207 black, black face panel $49ea
Quote "Romeyn Ncore" in order, CNC cutting $10ea
Ncore engraved center face panel $10ea
Shipping $25ea (4 or less chassis per order)
Subtotal $94ea x2 = $188pr
Handling to Boston per order: This one you can confirm at SR website if you go partway through checkout.  I'm almost positive USA handling per order was $10 or $12.50 or $15, the farther east the higher the fee. 

Utah was $10 so let's presume Boston is $15.  Sub 188pr + 15 = 203 + 3.5% Paypal (7.11) = 210.11 total by my math but please confirm.

Make sure you quote "Romeyn Ncore" for this chassis.

Paypal Mike the money with above notes, your full name, and shipping address and you should be good to go.     

[James Romeyn]

I was wondering the same, so I sent the attached email to Mike at Silicon Ray, but no answer yet?

Can you please confirm the prices below are correct?  Here is what I want:

1.   RE2207 chassis Black frontpanel -  $49.00 each
2.   CNC cut out quote "Romeyn Ncore"  - $10.00 each
3.   Shipping - $25.00 each (4 or less)
4.   Ncore engraved Black frontpanel - $10.00 each
5.   Subtotal $94.00 each x2 =  $188.00 total
6.   Handling fee to Las Vegas, Nevada, USA - $10.00
7.   Final Total Cost - $198.00 + 3.5% Paypal ($6.93) = $204.93

Yup, looks right, insert the quote just like #2 above, send me cookies this Christmas and everyone's happy!  Include your full name and shipping address and might as well include a phone too for the shipper just in case....something I forgot to suggest earlier, sorry.   

[Airborn]

Thanks, James.  Is chocolate chip ok....

[James Romeyn]

Is any food in the known world better? 

[TrungT]

^^^^^
You can share
 

[James Romeyn]

This was more work than I expected but members made it fun and worthwhile.  Besides, the fact I need six amps made DIY cutting unpalatable. 

Mike seems to take his work quite seriously and I feel like we'll be well rewarded. 

I hope the chassis exceed everyone's expectations.

 

Is anyone employing binding posts other than those specified for the 10mm holes? 

[santacore]

Is anyone employing binding posts other than those specified for the 10mm holes? 

I picked up some WBT posts from T.H.E. Show last weekend in Newport, CA. I think the rep told me they were 11mm, so hopefully I can squeeze them in without too much effort.

I've been sitting on these amp modules for a few weeks, so hopefully I can bring them to life soon.