Using subwoofer with SET120 Control Amp

0 Members and 1 Guest are viewing this topic. Read 608 times.

avahifi

Using subwoofer with SET120 Control Amp
« on: 21 May 2023, 06:38 pm »
A client suggested the following.

Get a 1/4” stereo phone plug. Connect two coax cables terminated with male RCA plugs. Connect from headphone output on the control amp to the subwoofer    line level inputs. Adjust woofer volume to match main speakers.

A better solution is this:

https://www.showmecables.com/1-4-in-stereo-male-to-dual-rca-female-adapter?utm_id=361522565&keyword=&msclkid=5b37b96147f21ab2cca3dd0ae8f0e8fc&utm_source=bing&utm_medium=cpc&utm_campaign=(ROI)%20Shopping%20-%20Numbers&utm_term=4577266909614369&utm_content=Adapters

Instant set of line level outputs!

Frank
« Last Edit: 22 May 2023, 07:02 pm by avahifi »

TomBo

  • Jr. Member
  • Posts: 62
Re: Using subwoofer with SET120 Control Amp
« Reply #1 on: 22 May 2023, 03:45 pm »
Frank,
Very smart suggestion and it solves a question I had too.  I will try this out. The headphone jack stays energized while listening through speakers! Now I see.
Thank you,
Tom

Lazeez

  • Jr. Member
  • Posts: 6
Re: Using subwoofer with SET120 Control Amp
« Reply #2 on: 1 Jun 2023, 12:02 am »
IF your subwoofer has high level inputs, you can use an extra stereo run of speaker cable from the amp to the Left and Right speaker cable inputs on your sub.  Then adjust the crossover in your sub.