AudioCircle
Audio/Video Gear and Systems => The Vinyl Circle => Topic started by: woodsyi on 8 Apr 2019, 02:03 pm
-
I put in a new pickup and took some pictures. As I sat down to play me some vinyl it occurred to be that my table spinning a red vinyl really looked good -- to me. Like the experience of wine that stem not only from the sense of taste but also from visual and olfactory cues, vinyl listening experience includes, in my opinion, visual component.
So, let's see some.
Mine from last night.
(https://www.audiocircle.com/image.php?id=193027)
-
(https://www.audiocircle.com/image.php?id=193031)
Symphonic Line RG6
-
(https://www.audiocircle.com/image.php?id=192545)
Rega Planar 8 with Apheta2
-
(https://www.audiocircle.com/image.php?id=193039)
VPI Prime
-
Any chance of naming the brand and model of turntable, thanks
-
https://i.imgur.com/ucDhFMX.jpg (https://i.imgur.com/ucDhFMX.jpg)
Pioneer PL 15D ll running well at nearly 50 years old.
-
Here's what my main system looks like these days
(https://www.audiocircle.com/image.php?id=193050&size=huge)
The table on the left is the Opera LP-5 with the Dynavector 507 MkII tonearm. This table is set up to use MC carts.
(https://www.audiocircle.com/image.php?id=193053&size=huge)
The table on the right is a Merrill modified AR-ES-1. This one has the Audioquest tonearm. This table is set up to use MM carts.
(https://www.audiocircle.com/image.php?id=193052&size=huge)
And this is the table in our exercise room. It's a vintage Micro Seiki DQX-500 with the MA-707 tonearm. I just got it going and it's a pretty decent little table. Rock solid on speed with the quartz lock. I'm running an old Denon DL-110. It's a little forward but fun to listen to, especially with my old HH Scott driving everything.
(https://www.audiocircle.com/image.php?id=193049&size=huge)
...oh, my better half does the TV thing when working out. Me...I do the vinyl thing.
-
Acoustic Solid One to One turntable, Dynavector 507MK-II arm, EMT JSD S 75 cartridge
(https://www.audiocircle.com/image.php?id=149740)
(https://www.audiocircle.com/image.php?id=193054)
-
The VPI Classic with a Blue Quintet,,,,,,will upgrade to the Cadenza,,,not sure which one
(https://www.audiocircle.com/image.php?id=193125)
-
Here's what my main system looks like these days
(https://www.audiocircle.com/image.php?id=193050&size=huge)
The table on the left is the Opera LP-5 with the Dynavector 507 MkII tonearm. This table is set up to use MC carts.
(https://www.audiocircle.com/image.php?id=193053&size=huge)
The table on the right is a Merrill modified AR-ES-1. This one has the Audioquest tonearm. This table is set up to use MM carts.
(https://www.audiocircle.com/image.php?id=193052&size=huge)
And this is the table in our exercise room. It's a vintage Micro Seiki DQX-500 with the MA-707 tonearm. I just got it going and it's a pretty decent little table. Rock solid on speed with the quartz lock. I'm running an old Denon DL-110. It's a little forward but fun to listen to, especially with my old HH Scott driving everything.
(https://www.audiocircle.com/image.php?id=193049&size=huge)
...oh, my better half does the TV thing when working out. Me...I do the vinyl thing.
I officially hate you. I've just ruined a shirt with ultra-drool...one in which I was going to dinner. You....you....you....... :drool:
(Scott, your rigs are seriously beautiful. Great work! And I am painfully envious.)
-
(https://www.audiocircle.com/image.php?id=193135)
my living room setup.
-
(https://www.audiocircle.com/image.php?id=193136)
my office system
-
(https://www.audiocircle.com/image.php?id=193138)
Custom with a 1" Corian plinth and VPI parts. Morch DP6 tonearm with a Transfiguration temper cartridge at the time, now replaced by a Lyra Kleos.
-
(https://www.audiocircle.com/image.php?id=193138)
Custom with a 1" Corian plinth and VPI parts. Morch DP6 tonearm with a Transfiguration temper cartridge at the time, now replaced by a Lyra Kleos.
Very, very nice :thumb:
-
Main Setup:
Eurolab (Scheu) Premiere Mk2 w/ 80mm platter and P/S upgrades
Origin Live Encounter Mk3C + Shelter 501 Mk2 (Soundsmith retip)
Jelco 750E + Soundsmith Zephyr mk3 or Denon 103R (Soundsmith retip)
(https://www.audiocircle.com/image.php?id=193160)
-
Other Setup:
Townshend Rock Mk3
Origin Live Silver Mk3a
Dynavector XX-2 mk2
(https://www.audiocircle.com/image.php?id=193162)
-
(https://www.audiocircle.com/image.php?id=193136)
my office system
I'm diggin' the old HH Scott. Is that a 222?
-
(https://www.audiocircle.com/image.php?id=193135)
my living room setup.
That's sweet too! Bet that sings...Fisher, Thorens, Klipsch :drool:
-
I officially hate you. I've just ruined a shirt with ultra-drool...one in which I was going to dinner. You....you....you....... :drool:
(Scott, your rigs are seriously beautiful. Great work! And I am painfully envious.)
Thanks Mud!
It's been a lot of years in the making but I'm pretty well done. I use it for (mostly) passive listening as my music room doubles as my office for work. When I get the urge to actually listen', she delivers pretty darned well. I've had more refined systems but this one bridges the gap between detail and involvement really well. It's a pleasure to listen to.
The HH Scott and Micro Seiki is just seductive. It has this big, fat, round sound that simply sucks you in. Imaging, depth, placement and all the 'audiophile' things are just 'meh', but that system is way more fun to listen to. You know you aren't listening as an audiophile and that lets you truly enjoy the tunes. I've got a similar HH Scott system out in my garage that gets tons of play time also.
-
(https://www.audiocircle.com/image.php?id=193055)
Custom built. Schroeder Artemis TL 1 -12 inch tonearm, Teres Versus idler drive system, Lyra Atlas cartridge( not in picture), carbon fiber clad electron microscope platform as the base, Shun Mook feet.
-
Dang, you guys have some pretty stuff! Hi5 has more in his platform feet than I've got in my second table.
(https://www.audiocircle.com/image.php?id=191869)
This is a Victor TT81 that I picked up and recapped, then bought router bits to make the base. Arm is a Jelco 750 10" with a Sumiko Blackbird.
The main system has a Vyger Timor with a Dynavector 20xL.
(http://www.vyger.com/wp-content/uploads/2015/06/vyger-turntables-timor-5-400x300.jpg) Mine has a Pioneer Exclusive P3 tonearm in a pod.
(https://www.vinylengine.com/images/model/pioneer_exclusive_p3_tonearm.jpg)
-
"Dang, you guys have some pretty stuff! Hi5 has more in his platform feet than I've got in my second table".
Oh, I'm not so sure ANY of us want to leave the price tag on our vinyl rigs for others to see! I think we all hear something in analog we are not willing to give up. I am thrilled to see so many vinyl crazies and D.I.Y. turntables. I guess there is still some passion left in analog.
-
(https://www.audiocircle.com/image.php?id=193258)
(https://www.audiocircle.com/image.php?id=193259)
(https://www.audiocircle.com/image.php?id=193260)
(https://www.audiocircle.com/image.php?id=193261)
I have a Garrard 301 rebuilt by Woodsong Audio in Idaho with a Fidelity Research FR-64s Arm and Koetsu Black Goldline. I had a Skeletal Plinth made by Acoustand in the UK and lastly fitted with
Boston Audio Mat 1 Platter Mat.
-
Nice!
-
Boy I’d be ashamed to post my tables. So I won’t. :lol:
-
Don, you switched arms! What happened to the SME?
-
Thanks Mud!
It's been a lot of years in the making but I'm pretty well done. I use it for (mostly) passive listening as my music room doubles as my office for work. When I get the urge to actually listen', she delivers pretty darned well. I've had more refined systems but this one bridges the gap between detail and involvement really well. It's a pleasure to listen to.
The HH Scott and Micro Seiki is just seductive. It has this big, fat, round sound that simply sucks you in. Imaging, depth, placement and all the 'audiophile' things are just 'meh', but that system is way more fun to listen to. You know you aren't listening as an audiophile and that lets you truly enjoy the tunes. I've got a similar HH Scott system out in my garage that gets tons of play time also.
You might be pretty well done, but you also done pretty well, Scott. Fabulous setups.
Even I would start exercising if I had that Scott/Seiki in an exercise room. Instead I'm practicing serious couch potatoing with my assuredly snoozer of a 1985 Yamaha P320/Shure and scratchy Hendrix lps or 45rpm doo wop. :oops: I wish you were my neighbor!
Good cheer.
-
Scott, hope all is well! I have been using the Fidelity Research arm for about 6 months now....I wanted to get a heavier mass arm and all the positive forum feedback on FR arms used with Koetsu Cartridges led me to search one out. I have been floored with the improvement in my vinyl setup since adding it and the Einstein Audio Phono Preamp. When your ready to move the Merrill let me know.....
Take care Scott,
Don
-
You might be pretty well done, but you also done pretty well, Scott. Fabulous setups.
Even I would start exercising if I had that Scott/Seiki in an exercise room. Instead I'm practicing serious couch potatoing with my assuredly snoozer of a 1985 Yamaha P320/Shure and scratchy Hendrix lps or 45rpm doo wop. :oops: I wish you were my neighbor!
Good cheer.
I'm still working my way up to regular exercise myself :lol:
-
Scott, hope all is well! I have been using the Fidelity Research arm for about 6 months now....I wanted to get a heavier mass arm and all the positive forum feedback on FR arms used with Koetsu Cartridges led me to search one out. I have been floored with the improvement in my vinyl setup since adding it and the Einstein Audio Phono Preamp. When your ready to move the Merrill let me know.....
Take care Scott,
Don
Cool :thumb:
Yep, all is well. The house is pretty well done, finally. Looks like I'll have some free weekends coming up. I definitely want to make it over to give your system a listen, especially the table. I'm still jonesin' for a good rim drive.
If you find yourself out this way, ping me. You'll be amazed at how the house turned out. It's unrecognizable to what we had before.
-
Boy I’d be ashamed to post my tables. So I won’t. :lol:
Don't be, the thread is to show your pride and joy. No one is judging. :)
-
(https://www.audiocircle.com/image.php?id=193346)
VPI TNT IV , Immedia RPM arm, and Transfiguration Spirit MKII cartridge.
-
(https://www.audiocircle.com/image.php?id=193348)
VPI HW-19 MKIV upgraded with the TNT heavy platter , SS clamp, SAMA motor, and Origin Live Silver arm with a Benz Micro L2 cartridge
-
(https://www.audiocircle.com/image.php?id=193349)
Thorens TD 124 MKI , SME 309 II arm and audio technica oc9 cartridge.
-
Damn Charlie, you got some nice rigs! :thumb:
Vinyl much? :lol:
-
(https://www.audiocircle.com/image.php?id=193354)
I do enjoy vinyl.
-
Nice. I see you enjoy some retro horns as well.....
-
Main rig tt:
Diy Teres using the direct drive platter and bearing, Verus motor, Teres arm, Sound Smith The Voice.
(https://www.audiocircle.com/image.php?id=193355)
Upstairs vintage tt:
Rek-O-Kut 12BH, Ortofon arm, Denon DL-103
(https://www.audiocircle.com/image.php?id=193356)
Work in progress:
Technics SP-10 Mk II on ~120 lbs of cast iron, Pete Riggle Woody arm, phenolic arm board (stock arriving today), going to try a Vessel R3SM cartridge on recommendation from a friend.
(https://www.audiocircle.com/image.php?id=193358)
-
Almost forgot, little rig at work in my office, Dual 1214 with some sort of Stanton cart, provides much enjoyment. :)
(https://www.audiocircle.com/image.php?id=193359)
-
Almost forgot, little rig at work in my office, Dual 1214 with some sort of Stanton cart, provides much enjoyment. :)
(https://www.audiocircle.com/image.php?id=193359)
Yes, yes they do. I still use a 1210 for my 78 system. It's a blast to listen to. The Dual is a bit hard to see in this pic but it sits on the Altec 824. I've got a black towel over it to protect the dust cover.
(https://www.audiocircle.com/image.php?id=143584&size=xlarge)
-
That you have a 78 system comes as no surprise at all. :)
Yes, yes they do. I still use a 1210 for my 78 system. It's a blast to listen to. The Dual is a bit hard to see in this pic but it sits on the Altec 824. I've got a black towel over it to protect the dust cover.
(https://www.audiocircle.com/image.php?id=143584&size=xlarge)
-
My « new » Thorens TD166mkII with a Stanton 680EE
(https://www.audiocircle.com/image.php?id=193362)
-
(https://www.audiocircle.com/image.php?id=193354)
I do enjoy vinyl.
Those speakers look like Altec A7's.
-
That you have a 78 system comes as no surprise at all. :)
:thumb:
I've got a second mono Stromberg amp if you want to build your own system ;)
-
My mobile 78 system. I can take it to a picnic on a mountaintop and listen to a Caruso 78 with a glass of red wine like a fruity Barbera d’Asti.
(https://www.audiocircle.com/image.php?id=43444)
-
Modded AT-1240 turntable with AT33EV cartridge... (https://previews.dropbox.com/p/thumb/AAZ6Uzblo-kWFmNyagnL-A3fdXYrjldHiQZYwE5_rr3F50otTX5wayuvlLa3Ku80e2g0TfeabSPe0QlfFF9LpUs7U0PuhyV2FwHSp3XOFR1E7hpMJa3fPFUUcPDsFP0nylm9flrPTEZkfkKi5998T4xB0wVcan7BttHCoaPD7UjbslNszvJmDD4i3dNuJ6LgpM5yh01j1gBBDCAixPrTeXav4kah_DFeI5xBZbWa0Y40X6-3ZbTzS6fq6ubC3A3L1HbCtHsma1egKcKv_5MsZLCH2PKtEwCzUrVofl2FMYFgkcGmH8Ji2kGBpOZe__hzLUcXi04q8M8gMqQLaCQ0uh3RWw7Rk3Aa0eJrBfI0Gwl0Tg/p.jpeg?size_mode=5)
-
(https://www.audiocircle.com/image.php?id=193444)
-
On the left is a Platine Verdier - ClearAudio TT2 - older VDH Colibri Stradivarius Signature which is table for anything vocal and small ensemble jazz. All tube Aesthetix Io phonostage just brings out the best in all vocals, especially the sexy female voices.
On the right is Teres 255 with Verus Rim Drive - Graham Phantom 2 Supreme - Soundsmith Strain Gauge 400 which is what I go to listen to symphonies, large bands and rock'n'roll It is very balanced, dynamic and throws a huge soundstage.
(https://www.audiocircle.com/image.php?id=193516)
-
(https://www.audiocircle.com/image.php?id=193541)
-
Here's mine VPI HW-19 MkIII. Cart is a AT-F7 moving coil.
(https://www.audiocircle.com/image.php?id=193545)
(https://www.audiocircle.com/image.php?id=193546)
(https://www.audiocircle.com/image.php?id=193547)
-
This thread should be renamed "Turntable Porn" :drool:
-
Awesome thread.
-
People...I'm in awe. Serious awe. Your rigs are amazing AND beautiful. Congrats to all of you. :bowdown:
Fabulous thread!
-
People...I'm in awe. Serious awe. Your rigs are amazing AND beautiful. Congrats to all of you. :bowdown:
Fabulous thread!
+1 8)
-
I said I was ashamed :o I guess I have no shame :lol:
(https://us.v-cdn.net/5021930/uploads/editor/i0/4nii5c9cmoj4.jpeg)
Kenwood KD-770D Cartridge: AT-OC9ML/II
-
I love this thread ´cause of the respect.
There is no « my tt is bigger or better than yours ».
And yes, this thread should be renamed « turntable porn ».
:thumb:
-
I said I was ashamed :o I guess I have no shame :lol:
(https://us.v-cdn.net/5021930/uploads/editor/i0/4nii5c9cmoj4.jpeg)
Kenwood KD-770D Cartridge: AT-OC9ML/II
Those old Kenwoods certainly have a following. Have you thought about changing out the electrolytics? I found that it wasn't terribly tough to do on my Victor.
-
This thread should be renamed "Turntable Porn" :drool:
Hey!
Ok, now cue that funky '70s guitar riffs music! 8) :lol:
Buddy
-
(https://img.auctiva.com/imgdata/2/0/0/7/2/5/9/webimg/978943963_tp.jpg)
-
You guys are killing me.
Harman Kardon T55C with Van Alstine outboard power supply mod, cartridge is a Goldring 1042
(https://www.audiocircle.com/image.php?id=190764&size=large)
-
Those old Kenwoods certainly have a following. Have you thought about changing out the electrolytics? I found that it wasn't terribly tough to do on my Victor.
I’m not sure that I’m capable
-
Error.
-
You guys are killing me.
Harman Kardon T55C with Van Alstine outboard power supply mod, cartridge is a Goldring 1042
(https://www.audiocircle.com/image.php?id=190764&size=large)
Had a T25 with that AVA mod back in my vinyl days. Good machines.
-
(https://www.audiocircle.com/image.php?id=193650)
(https://www.audiocircle.com/image.php?id=193651)
Don't you audio crazies know that vinyl is dead? This is how mine started.
-
(https://www.audiocircle.com/image.php?id=193652)
(https://www.audiocircle.com/image.php?id=193653)
Technics SP-15 broadcast table from a radio station in Alaska.
The ATP12 arm came with it.....its on till I finish my linear tracker,
(thats why theres so much table for the arm board)
Double plinth so I can move it....3 layers of 1" slate on top plinth,
2 layers on the bottom....Ill guess easily 200lbs total.
Paduack wood sides stained cherry........I really enjoyed building
and using this table.
-
I said I was ashamed :o I guess I have no shame :lol:
(https://us.v-cdn.net/5021930/uploads/editor/i0/4nii5c9cmoj4.jpeg)
Kenwood KD-770D Cartridge: AT-OC9ML/II
Hey!
Don't know why you were ashamed. That's a nice table there.
Here's what my main system looks like these days
(https://www.audiocircle.com/image.php?id=193050&size=huge)
The table on the left is the Opera LP-5 with the Dynavector 507 MkII tonearm. This table is set up to use MC carts.
Man! Now that's an ultimate "Audio Man Cave" Look like there's a blue light special going there.
(https://www.audiocircle.com/image.php?id=193135)
my living room setup.
Love that Mid-Century look.
(https://www.audiocircle.com/image.php?id=193354)
I do enjoy vinyl.
Damn! For a sheer volume, dynamic and scale hard to beat those speaker there. I'm sure those vinyls make great sound diffuser.
Anyway, some great TTs and systems here guys!
Buddy :thumb:
-
(https://www.audiocircle.com/image.php?id=193698)
TW Acustic Raven One plus Graham Phantom II plus Benz Micro LP
-
I finished the new 'table project. Technics SP-10 MK II with a cast iron plinth, Pete Riggle 12.2" Woody tonearm and a "The Vessel" R3SM cart. This sits on top of a 3" thick granite surface plate, which is atop a concrete filled stand. I figure the whole stack is about 450lbs. I am overjoyed with the results. I am still undecided on repainting the plinth, it's an old base from a "Tallysurf 4" surface roughness measuring instrument and I rather like the industrial look. The cast iron was inspired by the OMA cast iron SP-10 plinth they offer and the fact that I inherited the base when a friend passed. I'll never play a record on this without thinking of my old pal.
(https://www.audiocircle.com/image.php?id=193867)
-
I finished the new 'table project. Technics SP-10 MK II with a cast iron plinth, Pete Riggle 12.2" Woody tonearm and a "The Vessel" R3SM cart. This sits on top of a 3" thick granite surface plate, which is atop a concrete filled stand. I figure the whole stack is about 450lbs. I am overjoyed with the results. I am still undecided on repainting the plinth, it's an old base from a "Tallysurf 4" surface roughness measuring instrument and I rather like the industrial look. The cast iron was inspired by the OMA cast iron SP-10 plinth they offer and the fact that I inherited the base when a friend passed. I'll never play a record on this without thinking of my old pal.
Nice looking table Mike
I'd paint the plinth, everything else looks so nice it kind of detracts right now (IMHO)
-
I'd leave it. I like the industrial look. Glossy black and cherry red are overdone.
-
flat black might be cool
-
The 1980's Oracle Delphi MKI bought used and I refurbished and updated with MKV suspension with original Pabst DC motor and power supply.
SME Series III arm with Shure Ultra 500 cartridge and original stylus.
Pass Labs Aleph Ono phono stage to bring it all up after many years.
(https://www.audiocircle.com/image.php?id=193879)
-
(https://www.audiocircle.com/image.php?id=193135)
my living room setup.
I love the MCM look, too. I've also restored a Barzilay just like that, with a Thorens and a Devialet Expert Pro 250 inside. Still have work to do to configure the Dev correctly for the turntable.
Would you PM me a few pics of the rest of the room? I don't want to go offtopic. Thanks!
-
(https://www.audiocircle.com/image.php?id=194087)
(https://www.audiocircle.com/image.php?id=194088)
-
(https://www.audiocircle.com/image.php?id=194129)
-
I like the DIY turntable stand. :thumb:
I did something similar for my table with butcher block on top of mass-loaded speaker stands, with a few of these pads between the two:
https://www.supplyhouse.com/DiversiTech-MP-2E-EVA-Anti-Vibration-Pad-2-x-2-x-7-8
-
I like the DIY turntable stand. :thumb:
I did something similar for my table with butcher block on top of mass-loaded speaker stands, with a few of these pads between the two:
https://www.supplyhouse.com/DiversiTech-MP-2E-EVA-Anti-Vibration-Pad-2-x-2-x-7-8
Yep that's an old picture. I now use the same anti-vibration pads. Looking to get another box to better isolate the top plate :thumb:
-
What turn table is that ?
Looks sweet
-
What turn table is that ?
Looks sweet
Looks like a VPI prime?
-
Looks like a VPI prime?
Yep a VPI Prime with Hana SL cart :thumb:
-
(https://www.audiocircle.com/image.php?id=194192)
Project RM9.1
-
Project RM9.1
Very nice.
All the TT in this thread are nice. :thumb:
-
Hey!
(https://live.staticflickr.com/5279/5808871277_e546585972_b.jpg)
(https://live.staticflickr.com/3606/5809434380_f18919fc1c_b.jpg)
(https://live.staticflickr.com/5274/5809432752_5dfecf88b9_b.jpg)
Transcriptor Hydraulic Reference Turntable. This one was made by the original company likely around 1972-73 before it was licensed to J A Michell which continued to make this until 1977. I picked this one up back in early 2011. It was not meant to be a replacement for the Rega Planar 2 of which I was using then and bought it new back in 1997. I just like the look of it, an audio "objet d'art" But after I put it in my system especially after I got the SME 3009 II improved tonearm, later I added SME tonearm fluid damper also, I like it better than the Rega Planar 2. So it has been in my system since. Well, I still have the Planar 2 of which I will sell it soon since I don't really use it now.
This one is by no mean in mint condition. But it cleaned up nicely and spinning fine at 33 1/3 with great speed stability, pretty amazing after all this years. Although lately when I change to 45 it seem a bit slow. Not sure why since 33 1/3 is fine. I will have to look in to it. Perhaps time to change those resistors and caps in there. The motor still good but this is the biggest worry for me, I'm keeping my eyes for a replacement.
Anyway, those pics above where taken back in 2011. After 8 years of use I just gave it a good cleaning again last month, with new belt, new foam pads, oil and silicone fluid. And here's a video of it in action, click on the picture of the link next to it....
(https://live.staticflickr.com/31337/33692260028_72a5b98503_z.jpg) (https://flic.kr/p/TkgD5Y)Transcriptors Hydraulic Reference. (https://flic.kr/p/TkgD5Y) (https://www.flickr.com/photos/8309248@N06/), on Flickr
Here's link to my Flickr album if you are interested in seeing more of this table and the clean up process...
https://www.flickr.com/gp/8309248@N06/2Jp4k1 (https://www.flickr.com/gp/8309248@N06/2Jp4k1)
Buddy
-
Always loved the looks of that table Buddy.
Nice score!
-
Now that’s audio jewelry!!! :thumb:
-
Wow you analog folks have some clean, classy looking rigs :thumb:
-
So ajzepp can we tempt you to the dark side? :lol:
-
No parts to be found, the Transcriptor will always be a work of art. To be displayed forever working or not.
-
Hey!
(https://live.staticflickr.com/5279/5808871277_e546585972_b.jpg)
Here's link to my Flickr album if you are interested in seeing more of this table and the clean up process...
https://www.flickr.com/gp/8309248@N06/2Jp4k1 (https://www.flickr.com/gp/8309248@N06/2Jp4k1)
Buddy
Your Transcriptor is very nice.
Also great photos. :thumb:
-
(https://www.audiocircle.com/image.php?id=194230)
(https://www.audiocircle.com/image.php?id=194231)
(https://www.audiocircle.com/image.php?id=194232)
This is my Yamaha GT 2000 turntable, which is a Direct Drive table made by Micro Seiki for Yamaha in the late 70s to early 80s. I have changed out the original tonearm with a SAEC 308SX. It has a Yamaha YOP-1, an external power supply for the motor. It also has a YAB-1, yamaha anchor block, and a copper platter. It took me several years to chase down all the upgrade accessories for the table, and now my quest is completed. :)
-
(https://www.audiocircle.com/image.php?id=194235)
VPI Aries 1 with original platter, Terrastone feet, Vas Nova Cartridge
-
(https://www.audiocircle.com/image.php?id=194232)
This is my Yamaha GT 2000 turntable, which is a Direct Drive table made by Micro Seiki for Yamaha in the late 70s to early 80s. I have changed out the original tonearm with a SAEC 308SX. It has a Yamaha YOP-1, an external power supply for the motor. It also has a YAB-1, yamaha anchor block, and a copper platter. It took me several years to chase down all the upgrade accessories for the table, and now my quest is completed. :)
I've never even seen a picture of a Yamaha with a copper platter. Very cool looking! Is that a custom one off?
-
All I can say is WOW! :o I haven't owned a turntable in 32 years and decided to build a dedicated setup by starting with some well kept, reasonable used equipment (looking at a B&O 5913 to start). By the looks of the systems in this forum, I have a ton to learn but excited about this new (old) hobby. :thumb:
-
Yamaha did sell an accessory gun metal platter called YGT-1. It’s rarely for sale even in Japan. I have bidded on a few, it always lost out. Eventually I contacted a metal fabricator and commissioned him to make one out of copper using my aluminum platter as a reference.
-
(https://www.audiocircle.com/image.php?id=194260)
(https://www.audiocircle.com/image.php?id=194261)
-
Those Empires are the coolest in my opinion. Yours is in great condition!
Paul
-
(https://www.audiocircle.com/image.php?id=194260)
(https://www.audiocircle.com/image.php?id=194261)
Very Nice!!
-
(https://www.audiocircle.com/image.php?id=194230)
....
This is my Yamaha GT 2000 turntable, which is a Direct Drive table made by Micro Seiki for Yamaha in the late 70s to early 80s. I have changed out the original tonearm with a SAEC 308SX. It has a Yamaha YOP-1, an external power supply for the motor. It also has a YAB-1, yamaha anchor block, and a copper platter. It took me several years to chase down all the upgrade accessories for the table, and now my quest is completed. :)
Hey!
Now I see what you've been busy with. Good choice on the copper platter, look pretty too. Which cart you have on there? :D
Buddy
-
(https://www.audiocircle.com/image.php?id=194635)
-
(https://img.canuckaudiomart.com/uploads/user_image/2507/25484.jpg)
-
(https://www.audiocircle.com/image.php?id=195863)
-
Hi Guys,
I'm cheating just a little bit. I've just ordered a Bryston Turntable and waiting for it to be delivered. This is my first high quality turntable as I've bought mid priced one's previously. Now I need a better cartridge and phono stage.
(https://www.audiocircle.com/image.php?id=196939)
Cheers Rod
-
Just finishing a full frame off restoration of this original VPI HW-19. I've really fallen for this table and one would be really surprised how well it performs. I have a VPI Prime next to it with a Grado that's 13X more expensive than the Black 2 installed in the HW-19. The law of diminishing returns really applies here.
(https://www.audiocircle.com/image.php?id=196940)
-
Is that a Jelco 250 arm?
I currently use a Jelco 750E (10 inch) on my Scheu Premiere Mk2 table and I'm shocked at the performance given its very reasonable price.
-
Is that a Jelco 250 arm?
I currently use a Jelco 750E (10 inch) on my Scheu Premiere Mk2 table and I'm shocked at the performance given its very reasonable price.
Sort of, Sumiko MMT. Another VPI owner helped me out and had it with the arm board and a bunch of spares.
-
Sumiko is made by Jelco.
-
Sumiko is made by Jelco.
Yes, that's basically what I meant. 8) :thumb:
-
Hi,
Really nice looking restoration of the VPI turntable.
Cheers Rod
-
(https://www.audiocircle.com/image.php?id=197025)
(https://www.audiocircle.com/image.php?id=197026)
New Dr. Feickert TT
-
Technics SL-1200G. I do use a Funk Firm Acromat (mat) sized for 1200 tables, but I wanted to showcase the platter. Also shown with a Zupreme headshell and AT ART9 cart.
(https://www.audiocircle.com/image.php?id=197032)
-
(https://www.audiocircle.com/image.php?id=197025)
(https://www.audiocircle.com/image.php?id=197026)
New Dr. Feickert TT
oooooooo.....nice! :thumb: :dance:
Is that an OL Silver arm I spy? Great arm -- especially for the $$. I rotate mine across my Townshend Rock 3 and OL Aurora 3.1 tables.
-
oooooooo.....nice! :thumb: :dance:
Is that an OL Silver arm I spy? Great arm -- especially for the $$. I rotate mine across my Townshend Rock 3 and OL Aurora 3.1 tables.
Yes sir it is...I like it a lot too!
-
Technics SL-1200G. I do use a Funk Firm Acromat (mat) sized for 1200 tables, but I wanted to showcase the platter. Also shown with a Zupreme headshell and AT ART9 cart.
(https://www.audiocircle.com/image.php?id=197032)
Handsome table that is one of the best $$ values out there IMO, enjoy it !
-
SME 20/2A with an SME IV.Vi arm and Lyra Atlas cartridge
(https://www.audiocircle.com/image.php?id=197091)
-
(https://www.audiocircle.com/image.php?id=197110)
-
Main System
(https://www.audiocircle.com/image.php?id=181763)
Clearaudio Champion II
(https://www.audiocircle.com/image.php?id=197115)
Maplenoll air bearing
(https://www.audiocircle.com/image.php?id=197114)
-
Custom Roksan Radius 5 with bubinga plinth
(https://www.audiocircle.com/image.php?id=197116)
-
My system for playing 78s :)
(https://www.audiocircle.com/image.php?id=197135)
-
Buddy,
I have an AT ptgIII cart on it right now. I also just got an AT art 9 that I have not put on yet, because I just changed my phono preamp and amplifier. I wanted to hear the difference with the old cart before changing to the new one.
Michael
-
(https://www.audiocircle.com/image.php?id=199128)
Sony ps 8750
-
(https://www.audiocircle.com/image.php?id=199128)
Sony ps 8750
Very nice. That's a turntable that's not seen much in the U.S. Do you have the original mat? It was quite innovative as well, having an oil layer under the surface.
-
(https://www.audiocircle.com/image.php?id=199154)
Dual 1229 with Grado Reference Master cartridge
-
Very nice. That's a turntable that's not seen much in the U.S. Do you have the original mat? It was quite innovative as well, having an oil layer under the surface.
Thank you very much. I actually own 2 of them I got both in non-working condition. I have restored both to full function and they are a pleasure to use. They both have original tools for the vta and original 45 adapters. I only have one extra weight and I do have one original mat, but it is seeping :cry:
-
Okay, I will play but please do not judge me for the lack of dusting. Piano black is a major pain.
(https://www.audiocircle.com/image.php?id=199209)
(https://www.audiocircle.com/image.php?id=199210)
(https://www.audiocircle.com/image.php?id=199211)
(https://www.audiocircle.com/image.php?id=199212)
(https://www.audiocircle.com/image.php?id=199213)
(https://www.audiocircle.com/image.php?id=199214)
Origin Live Sovereign Deck, Origin Live Conqueror Mk 2 arm with upgraded Silver hybrid wiring, DC-300 motor, Ultra Controller, and upgraded Origin Live transformer. Rosinante Dark Matter base. ZYX Universe 2 cartridge. Tribute custom made MC Step Up. Modwright PH 9.0 SE phono stage with NOS Siemens E88CC tubes. Triode Wire Labs cables.
-
Vinyl Nirvana restored Thorens 160 super with Jelco 750d and Soundsmith Carmen II
(https://www.audiocircle.com/image.php?id=199221)
-
(https://www.audiocircle.com/image.php?id=199225)
Clearaudio Emotion SE Ceramic Mag Bearing, Satsify Carbon Tone arm, Phoenix Falcon Power Supply
Shelter 501 MKII Cartridge.
-
Well ...broke out my table after two years of storage....a bit noisy and really needs a tune up but nice to spin for a change....vintage empire 598...with sound smith cartridge:
Maybe ill get the old dual 1019 out this weekend to compare
(https://www.audiocircle.com/image.php?id=201424)
-
Acoustic Signature Triple X. Hana SL PatheWings Panzerwood weight.
My Forever Table ❤️
(https://www.audiocircle.com/image.php?id=201429)
-
Hey!
(https://live.staticflickr.com/31337/49271588572_4171bc8e3f.jpg) (https://flic.kr/p/2i4XLFN)1917 Recording of "Silent Night, Holy Night"; (https://flic.kr/p/2i4XLFN), on Flickr
I see that some of you here have 78rpm playback systems, I even noticed a few early acoustical machines here. Cool! 8) So, here's mine to join the 78rpm club.
Here's my 1902 Victor Type E Talking Machine with Victor Exhibition Reproducer. I bought this machine back in 2007. It is a beautiful machine with original brass bell horn and pretty much all original, a great survivor. Although, about a year after I got it, one of the spring broke, it was a scary experience. Luckily there are still people around the US who specialized in fixing these machines. So, I got both springs replaced and the entire mechanical parts overhauled. So, this should last me another 100 years or so. I rebuilt the reproducer myself with parts bought from phonograph store on internet. It is a fun machine, every time I cranked it up, I'm always amazed by it that is actually work at all. Well, it is fun listening to acoustically recorded Caruso belting out an aria like "La Donna E Mobile" on this machine!
And since it is a Christmas Eve tonight, here's my machine playing 10" Victor 45145-B "Silent Night, Holy Night" performed by the Trinity Choir. From info I've gather, this disc was first released in 1917. Anyway, have a Merry Christmas and a great Holiday Season everyone.
Buddy
-
Hey!
(https://live.staticflickr.com/31337/49271588572_4171bc8e3f.jpg) (https://flic.kr/p/2i4XLFN)1917 Recording of "Silent Night, Holy Night"; (https://flic.kr/p/2i4XLFN), on Flickr
I see that some of you here have 78rpm playback systems, I even noticed a few early acoustical machines here. Cool! 8) So, here's mine to join the 78rpm club.
Here's my 1902 Victor Type E Talking Machine with Victor Exhibition Reproducer. I bought this machine back in 2007. It is a beautiful machine with original brass bell horn and pretty much all original, a great survivor. Although, about a year after I got it, one of the spring broke, it was a scary experience. Luckily there are still people around the US who specialized in fixing these machines. So, I got both springs replaced and the entire mechanical parts overhauled. So, this should last me another 100 years or so. I rebuilt the reproducer myself with parts bought from phonograph store on internet. It is a fun machine, every time I cranked it up, I'm always amazed by it that is actually work at all. Well, it is fun listening to acoustically recorded Caruso belting out an aria like "La Donna E Mobile" on this machine!
And since it is a Christmas Eve tonight, here's my machine playing 10" Victor 45145-B "Silent Night, Holy Night" performed by the Trinity Choir. From info I've gather, this disc was first released in 1917. Anyway, have a Merry Christmas and a great Holiday Season everyone.
Buddy
I still remember this machine. It delivers the performance unedited from such a long time ago. With all the advance of technology, I guess modern equipment has technically edited most of this communication out with the performers. :thumb:
-
Garrard 301 Grease Bearing and a Thorens TD-124 mkii
(https://www.audiocircle.com/image.php?id=202467)
(https://www.audiocircle.com/image.php?id=202465)
(https://www.audiocircle.com/image.php?id=202466)
-
Vintage , what r your speakers ?
-
Vintage , what r your speakers ?
According to his system profile. Magico S1 M-Cast.
@Vintage, I dig your system choices!
-
I still remember this machine. It delivers the performance unedited from such a long time ago. With all the advance of technology, I guess modern equipment has technically edited most of this communication out with the performers. :thumb:
Hey!
Yup, with the acoustical recording I think you can say that it is the ultimate direct-to-disc. Singer and musician literally sing and play through a horn and to the cutting head on wax master. Of course it is far from great sounding, but to hear Caruso belting out opera arias from this little machine is just mesmerizing.
Anyway, I just gave it a good cleaning and oiled the wood and took these pics of the inside...
(https://live.staticflickr.com/65535/49369958573_9c1d2d63af_z.jpg) (https://flic.kr/p/2idDWEi)Victor Type E Talking Machine. (https://flic.kr/p/2idDWEi) by (https://www.flickr.com/photos/8309248@N06/), on Flickr
(https://live.staticflickr.com/65535/49370418016_7f16852324_z.jpg) (https://flic.kr/p/2idGieJ)Victor Type E Talking Machine. (https://flic.kr/p/2idGieJ) by (https://www.flickr.com/photos/8309248@N06/), on Flickr
Old fashion craftsmanship of wood, cast iron, and brass. The original label under the machine still intact. Although, stained and faded somewhat you can still see the date on the lower left bottom dated March 1, 1902. And look like it cost 8)$30 back in 1902.
Paul, I still crank it up and play it from time to time. And I do get a kick and smile our of it every time hearing sound from this machine. It is one of my prized possession. I've always wanted one for a long time, since I was a teenager when I saw one in an antique store here in NYC, I think that store is long gone, but I still remembered it. Of course if I had money and space I would love to have a bigger machine with big smooth wooden horn
Buddy
-
It’s my first stab at a decent TT / phono setup..
Any recommendations on upgrades ,( arm, cables, cartridge, )
Or would it be better to just go after another brand (Kuzma, Sota, Technics)..?
(https://www.audiocircle.com/image.php?id=203175)
-
Just beginning putting together my first system at almost 40 years old...
found a MinT technics 1200 mk2 for 500$...I think its from '81... like its never been used. sounding great
with these 30$ speakers lol :thumb: paired it with a nakaoga mp110 cart
(https://www.audiocircle.com/image.php?id=203560)
-
(https://www.audiocircle.com/image.php?id=203944)
-
Just beginning putting together my first system at almost 40 years old...
found a MinT technics 1200 mk2 for 500$...I think its from '81... like its never been used. sounding great
with these 30$ speakers lol :thumb: paired it with a nakaoga mp110 cart
(https://www.audiocircle.com/image.php?id=203560)
Congrats, better late than never !!
-
(https://www.audiocircle.com/image.php?id=205165)
VPI Classic Signature
-
(https://www.audiocircle.com/image.php?id=205952)
Origin Live Sovereign mk3-2 with the OL Enterprise C tonearm/Ortofon Windfeld TI and OL Illustrious mk3c toneam/Kiseki Purpleheart
-
Sweet setup! :thumb:
OL is great stuff. I have two of their arms and one table. Below the level of yours, I can only imagine how awesome yours sounds! :banana piano:
-
Hey!
(https://www.audiocircle.com/image.php?id=209236)
How I like to start my morning, nice cups of SME arms.
Well, not a complete table, but parts of it. SME 3009 S2 Improved and SME 3009 Series II. I picked up the Series II back in February, in near mint with original box and documents. Was updated by SME UK back in 1989 with new socket, rewired, RCA out and SME RCA cable.
Buddy
-
(https://www.audiocircle.com/image.php?id=209401)
-
HW40 sorry but I can't get a pic to upload
-
Almost finished with this tt project.
(https://www.audiocircle.com/image.php?id=211430)
Picked up the Sony TT3000 from a member here.
Plinth is solid Rosewood. Finish is lacquer. Arm is a Jelco LB 12 inch with a Lyra Delos cart.
Still tweaking but sounding very good so far...
(https://www.audiocircle.com/image.php?id=211431)
-
(https://www.audiocircle.com/image.php?id=211432)
-
Just got the SL1210GAE
(https://www.audiocircle.com/image.php?id=211433)
-
Here's my latest vinyl rig. VPI Aries 2 with a SoundSmith Aida MK ll cartridge.
(https://www.audiocircle.com/image.php?id=212858)
-
(https://www.audiocircle.com/image.php?id=70757)
WTL Amadeus / VAS re-tipped ZU Denon 103( currently) / A23 SUT/ Shindo Aurieges MM
-
Opera Consonance LP-2.0 (baby brother to Scott F.'s LP-5) with Moerch Up-4 tonearm and a Grado Sonata 2 cartridge through a Pro-Ject Phono Box RS phono preamp connected via Pro-Ject Connect It XLR tonearm cable.
(https://www.audiocircle.com/image.php?id=212864)
(https://www.audiocircle.com/image.php?id=212865)
(https://www.audiocircle.com/image.php?id=212866)
Martin
-
(https://www.audiocircle.com/image.php?id=212886)
Brinkmann Bardo w/Kuzma Stogi & Koetsu Black
-
(https://www.audiocircle.com/image.php?id=218637)
Kuzma Stabi S with Kuzma 4 point 9 and Car 40 cartridge
-
(https://www.audiocircle.com/image.php?id=218638)
The BL-91 is in need of a new motor. So my original Classic VPI is in use.,
(https://www.audiocircle.com/image.php?id=218641)
-
Mine's pretty basic - a 16 year old VPI Aries Scout, stock with the exception of their antiskate weight system. It rests on a set of Black Diamond Racing carbon fiber pucks. Cartridge is currently an Ortofon 2M Bronze.
(https://www.audiocircle.com/image.php?id=218639)
(https://www.audiocircle.com/image.php?id=218640)
-
VPI HW-19 Mk4 TNT, and SME IV.5i arm, both with various DIY hot rodding mods**; Soundsmith Strain Gage cartridge and pre-amp; (**some mods (platter, tonearm and suspension) documented in detail on AudioCircle — links available on request)
(https://www.audiocircle.com/image.php?id=218669)
-
(https://www.audiocircle.com/image.php?id=218684)
(https://www.audiocircle.com/image.php?id=218685)
-
(https://www.audiocircle.com/image.php?id=219607)
-
(https://www.audiocircle.com/image.php?id=251308)
Thorens 125 + SME -- completely rebuilt: Jatoba solid wood plinth tung oiled, all mechanicals refurbished or replaced, electronics completely recalled, platter balanced & rim polished, slider switches also faced with Jatoba.