Is there a manual or set of instruction sheets to go with the new BR-4 remote control?
Not sure on that - Mike would know - mpickett@bryston.com
Here's what I have:
Here's some BR4 Firmware Notes:
---------------------- Reset to factory default --------------------------
Press 'CODE' for 5 seconds, until LED blinks.
Release 'CODE' button.
Press '795', LED will blink 4 times.
;---------------------- Volume Function -----------------------------------
By default, the volume buttons control the programmed pre-amp even when that mode is not selected.
To use the BDA3.14 volume control:
Press 'CODE' for 5 seconds, until LED blinks.
Release 'CODE' button.
Press '717', LED will blink 2 times.
Press 'CODE' for 5 seconds, until LED blinks.
Release 'CODE' button.
Press '750', LED will blink 2 times
To use the pre-amp volume control:
Press 'CODE' for 5 seconds, until LED blinks.
Release 'CODE' button.
Press '751', LED will blink 2 times
---------------------- Device codes --------------------------------------
Device codes for Volume/Mute functions
710 0000 Not assigned
711 0001 SP1.7/SP2
712 0010 B100/BP16/BP17
713 0011 Not assigned
714 0100 Not assigned
715 0101 BCD1, BCD3
716 0110 BDA1, BDA2 *** NO VOLUME CONTROL ***
717 0111 BDA3, uses device ID 6
718 1000 Not assigned
719 1001 BDP3, uses device ID 9
720 1010 Not assigned
721 1011 BP25/BP26
722 1100 B60/BP6
723 1101 Not assigned
724 1110 Not assigned
725 1111 Not assigned
750 - Select D/A to use the BDA3.14 volume control.
Select Preamp to use the preamp volume control.
751 - Preamp volume control is used in either D/A or Preamp mode.
james
