Custom Subwoofer Cabinets

Randog Dymax sub in progress - 3.0 cu.ft Dymaxion subwoofer enclosure for AC member Randog. Veneered in Black Walnut burl and American Black Cherry.	F-100 Dymax subs nearly completed - Twin Dymaxion subwoofers for AC member F-100. Veneered in Birds-Eye Maple and quilted Makore.	F-100 Dymax - Close up of F-100's Dymaxion. FInished with water-borne lacquer and rubbed to medium gloss.	Dymax sub built for Randog using Sonicraft 300 driver - Randog's Dymaxion with Sonicraft 300 driver loosely fitted.
1.5 cu.ft Dyamax sub for dual 8" Dayton Quattro drivers - Smaller 1.5 cu.ft Dymaxion subwoofer built for Zach. Veneered with Sapele and curly Maple. Small Ebony triangle inlaid onto curly maple.	Dymax sub w/ Quattro's mounted. - Zach's Dymaxion Sub after he mounted a pair of Dayton Quattro's.	Detail of Ebony inlay in Dymax sub and veneer joints. - Close-up of Zach's Dymax sub showing the little inlay and the veneer joints. There are approximately 100 joints to fit in the construction of one of these subwoofers.	Zach's custom dymaxion sub - Another close-up shot of Zach's Dymaxion sub. This sub was built as a 1.5cu.ft blank for Zach to cut and mount his own drivers.
Randogs subs	detail in progress - Dymaxion waiting for more coats of lacquer....	Zachs Dymaxion sub	One module of Dymaxion array for Marbles - Marbles commissioned 4 Dymaxions in Bubinga and Maple. This is our preliminary model of a single unit.

(Prev) | Page 1 | Next »