"...run them int he direction of the print."
So if I understand correctly ...let's say the signal input is from the 'left',
then you would orient the capacitor so that you can read it's label and the
output would on the 'Right' side of the capacitor?
Moreover does that agree with the following...
"The line on the label (at the shorter lead-out end) indicates the outer foil.
This should be connected to the point of lowest impedance/signal output / AC end."?
Lastly, is this inner foil (long lead-out) / outer foil (short lead-out) & reading
the label from left to right an industry standard?
Thanks