Home
Circles
Gallery
Systems
Calendar
About/Help
Login
Register
Gallery
»
Browse gallery
»
Albums by jonbuilds
»
Open Baffle Speakers
Gallery
Browse gallery
Random albums
I'm Feeling lucky
Up to Albums by jonbuilds
Open Baffle Speakers
Album for images posted to Open Baffle Speakers
Home built PAP Trio15TB, nearly complete
First pass with the router, for the TB1808
First check for fit of the TB1808
One of four 3/4" baffle pieces, with my custom router setup
Two of the four baffle pieces standing together. You can see that I decided to cut the different-sized holes in each piece before I laminated them together. In retrospect, that cost me a lot of time and created quality issues I had to correct. More later...
First look main baffles. Note all the challenges I created for myself with tearout, especially my first try with the center hole on the left. Its all coming back to me now...good tools, patience, planning. NOW I know...
All four baffle pieces cut and standing together. The plan was to double the stock material thickness by laminating two pieces together. Woofers recessed in the back, full range surface mount from the front.
laminated sheets of red oak plywood
test stain - red oak
test stain - black
test scrap - clear, three coats, light sand between
laminated baffles
(Prev) | Page 1 |
Next
»
View slideshow