New Felix Power Line Conditioner “FO-Felix”

0 Members and 1 Guest are viewing this topic. Read 13415 times.

WireNut

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #20 on: 5 May 2018, 11:00 pm »
What's delivery look like on the boards to the US?

Thanks.


Folsom

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #21 on: 6 May 2018, 04:04 am »
USPS priority means next week.

undertowogt1

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #22 on: 6 May 2018, 12:13 pm »
Hi Flosom,

Not sure if this was covered in another thread but a few questions
 - I built your Folsom Chip Amp, would the Felix work well inline inside this amp.

- does this board come with a recommended parts list like you chip amp so I can just order off mouser.

- Approximately how much for parts and board

Thanks in advance


Folsom

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #23 on: 6 May 2018, 05:33 pm »
It can be used with the amp no problem. I do include a parts list. Digikey is easier for a one stop shop because mouser sold out of a few things, at least for the moment. So yes you can do a one stop shop. Parts on top of the $13 for the board+terminals is $14-16 depending on X cap selection.

Folsom

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #24 on: 19 May 2018, 07:35 pm »
Incase anyone missed round #1, round #2 is up


Folsom

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #25 on: 11 Jul 2018, 09:43 pm »
GB# 3 is going on.

There's an enclosure included that will make it MUCH easier for most people.

WireNut

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #26 on: 11 Jul 2018, 10:52 pm »
GB# 3 is going on.

There's an enclosure included that will make it MUCH easier for most people.

 :thumb:

MttBsh

  • Full Member
  • Posts: 691
Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #27 on: 12 Jul 2018, 12:42 am »
I've had a little difficulty finding information about this Fo-Felix Power Line Conditioner, there are lots of micro-technical details shared here but nothing that tells me what this thing looks like or how it is used. 

You mention that it is a board with an enclosure... would it be considered a stand-alone conditioner (like, for example, the PS Audio Uberbuss) that has outlets that one can plug audio components into? I'm looking for a good quality conditioner to plug my DAC, preamp and amp into and would be interested in knowing if the Fo-Felix would be a good solution. Thanks for any "big picture" info you can share.


MttBsh

  • Full Member
  • Posts: 691
Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #29 on: 12 Jul 2018, 04:09 am »
Yes, unfortunately I have three left thumbs :lol:!

Just curious if selling assembled units is allowed. There are a lot of audiophiles like me who have zero DIY skills.

Folsom

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #30 on: 12 Jul 2018, 07:33 am »
You can PM me about that.

Folsom

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #31 on: 19 Dec 2018, 01:53 am »
Example pictures of what can be made:




WireNut

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #32 on: 24 Mar 2019, 03:24 pm »
Just a heads up. Group buy #4 for the Fo-Felix pcb's is on at DIYaudio.

Link:
https://www.diyaudio.com/forums/group-buys/335200-gb-round-4-fo-felix-gb-1-ac-receptacle-enclosure.html




MHL

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #33 on: 24 Mar 2019, 04:30 pm »
Example pictures of what can be made:





How much for the case in the photo?  I have three boards from a previous GB.

Thanks

Folsom

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #34 on: 24 Mar 2019, 09:49 pm »
Check the link. The problem is the GB has never happened.

undertowogt1

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #35 on: 19 Apr 2019, 08:59 pm »
Hi All, Its me , the DIY guy who knows nothing about electronics  :lol:. I bought 4 Fo Felix boards and Folsom sent me the parts list. It kind of looks like another language to me so I need some translation.

CMC - Common Mode Choke ( I figure that one out)
What is a Comoco and Bourn? are these brand names?

 I will hopefully be making this power conditioner for the following

Folsoms Chip amp,
a bottlehead Reduction Phono Preamp,
My laptop
a record player.
I have a passive preamp / TVC
and a small 6N11 tube preamp


I will have 4 boards, So should I pick a CMC for the amp and also CMC for my sources / preamp?

I assume all of these do not draw much current but I do not know what CMC to use, but I want to be sure. Am I correct in choosing the  P3717-A - 3A 90W/180W.


Audio Circle is always very helpful and with a little help I can get through this. If I can do this without burning my house down...anyone can.
Thanks in advance

« Last Edit: 19 Apr 2019, 10:52 pm by undertowogt1 »

Folsom

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #36 on: 19 Apr 2019, 09:17 pm »
I would greatly appreciate a PM instead of posting those values...

undertowogt1

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #37 on: 19 Apr 2019, 11:09 pm »
I would greatly appreciate a PM instead of posting those values...
Deleted, truly sorry about that

Folsom

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #38 on: 20 Apr 2019, 01:47 am »
PM sent, don't be afraid to ask all the questions you need.

WireNut

Re: New Felix Power Line Conditioner “FO-Felix”
« Reply #39 on: 27 Apr 2019, 10:48 pm »
Hi Jeremy,

I just happened to run across a picture of your Fo-Felix and enclosure showing how you stacked 6 boards to 3 outlets + an unfiltered outlet.
I love this. Stacking the Fo-Felix is a great idea if an enclosure is tall enough.

I may have missed the photo on other threads, or may have just over looked it, but I love the idea.
Damn, I might have to modify or build a new enclosure for my Fo-Felix.

The photo I've uploaded is the only photo I know of that shows a good image of how you stacked your Fo-Felix in a single enclosure  :D.