Show coverage day 3

0 Members and 1 Guest are viewing this topic. Read 41941 times.

Big Red Machine

Re: Show coverage day 3
« Reply #80 on: 18 Oct 2011, 09:11 pm »












I cannot remember this brand of speaker?

standub

Re: Show coverage day 3
« Reply #81 on: 19 Oct 2011, 12:23 am »
I cannot remember this brand of speaker?
Evolution acoustics, speaker looked great, drivers looked like they cost about $5.

AlexG

  • Industry Participant
  • Posts: 223
Re: Show coverage day 3
« Reply #82 on: 19 Oct 2011, 12:50 am »
Pez, next year we are gonna have to work on getting you to actually type out on the forum half the sh!t you say to me in the halls between rooms :P

 :lol: :lol: :lol: :lol: :lol:

Great job like always...thanks for the coverage. Always nice to see you guys...

Alex

Big Red Machine

Re: Show coverage day 3
« Reply #83 on: 19 Oct 2011, 12:58 am »
Evolution acoustics, speaker looked great, drivers looked like they cost about $5.

Thanks.

zybar

  • Volunteer
  • Posts: 12071
  • Dutch and Dutch 8C's…yes they are that good!
Re: Show coverage day 3
« Reply #84 on: 19 Oct 2011, 01:00 am »
Evolution acoustics, speaker looked great, drivers looked like they cost about $5.

I hope that you just left some zeros off after the $5.   :lol:

Those aren't cheap drivers.  Here is what they are:

Tweeter:  2” Pleated Diaphragm Air Velocity PDAV 

Woofers:  4” Ceramic Matrix Mid Bass CMAT

Not sure who makes the drivers for this model.  For other models in the Evolution Acoustics lineup, the drivers are made by Acuton.

George


jimdgoulding

Re: Show coverage day 3
« Reply #85 on: 19 Oct 2011, 01:31 am »
Thanks, Jorge.  That needed a follow-up.

standub

Re: Show coverage day 3
« Reply #86 on: 19 Oct 2011, 02:09 am »
I hope that you just left some zeros off after the $5.   :lol:

Those aren't cheap drivers.  Here is what they are:

Tweeter:  2” Pleated Diaphragm Air Velocity PDAV 

Woofers:  4” Ceramic Matrix Mid Bass CMAT

Not sure who makes the drivers for this model.  For other models in the Evolution Acoustics lineup, the drivers are made by Acuton.

George

The tweet looks a hell of a lot like the tweeter ML uses on the stuff they sell at Best Buy, and the ceramic woofers were moving quite a bit for not playing loud.

Vapor Audio

  • Industry Participant
  • Posts: 2023
  • Building Audio Bling since 2007
    • Vapor Audio
Re: Show coverage day 3
« Reply #87 on: 19 Oct 2011, 02:15 am »
I hope that you just left some zeros off after the $5.   :lol:

Those aren't cheap drivers.  Here is what they are:

Tweeter:  2” Pleated Diaphragm Air Velocity PDAV 

Woofers:  4” Ceramic Matrix Mid Bass CMAT

Not sure who makes the drivers for this model.  For other models in the Evolution Acoustics lineup, the drivers are made by Acuton.

George

It's a $50 Air Motion Transformer tweeter, and a woofer that could easily be had for $30.  Neither has anything to do with Accuton.  Having seen the woofer out of the cabinet, I'm 95% sure I know who makes it ... but not going to say unless 100%. 

S Clark

  • Full Member
  • Posts: 7356
  • a riot is the language of the unheard- Dr. King
Re: Show coverage day 3
« Reply #88 on: 19 Oct 2011, 02:16 am »
Regardless of driver cost, those little Evolutions were the best small speaker that I heard at the show.  Amazing clarity.

Vapor Audio

  • Industry Participant
  • Posts: 2023
  • Building Audio Bling since 2007
    • Vapor Audio
Re: Show coverage day 3
« Reply #89 on: 19 Oct 2011, 02:20 am »
Regardless of driver cost, those little Evolutions were the best small speaker that I heard at the show.  Amazing clarity.

End result is all that matters ...

SlushPuppy

Re: Show coverage day 3
« Reply #90 on: 19 Oct 2011, 02:30 am »
End result is all that matters ...

 :thumb:

I've heard some really great loudspeakers that used inexpensive drivers.

dBe

  • Industry Participant
  • Posts: 2181
    • PI audio group, LLC
Re: Show coverage day 3
« Reply #91 on: 19 Oct 2011, 02:35 am »
Hi Charles,

Well, there's this company called FedEx... :cuss:
Let's see, lost original shipment, "forgot" one speaker on the truck in the backup Fri morning shipment, etc., etc, etc.
It was only by going down to the FedEx hub on Fri 5pm and appearing ready to go postal, that I finally retrieved the 2nd speaker (when the knucklehead driver returned @ 5:45).
Sooo....Friday was a complete bust. I was only able to display Saturday. Bunch of folks passed thru. Packed up and left early Sunday. Ah well. lesson learned. As Danny Ritchie sez, drive, never ship!
You trust Paul Mah's ears? :wink:

cheers,

AJ
AJ, it was worth it, though.  Your room sounded great.  Just a notebook source, the amp, the speakers and the music!  Ahh, the music.  I loved the Arturo Sandoval that you played for me.

The Soundfields are incredibly room friendly.  Nice balance and extension even without any room treatment.  Very nice sound. 

Great to finally meet you, too   :thumb:

Dave

Bill Baker

  • Industry Participant
  • Posts: 4887
  • Purity Audio Design -Custom Design and Manufacturi
    • Musica Bella Audio
Re: Show coverage day 3
« Reply #92 on: 19 Oct 2011, 08:34 pm »
Since so few people were around to see and hear the KR amps in our system, I thought I would post some proof that the event actually took place :thumb:

Sorry about the picture quality, these are cell phone photos






Don_S

Re: Show coverage day 3
« Reply #93 on: 19 Oct 2011, 08:57 pm »
Obviously Photoshop.   :lol:

If a tree falls in the forest..... :scratch:

Since so few people were around to see and hear the KR amps in our system, I thought I would post some proof that the event actually took place :thumb:

Sorry about the picture quality, these are cell phone photos





Bill Baker

  • Industry Participant
  • Posts: 4887
  • Purity Audio Design -Custom Design and Manufacturi
    • Musica Bella Audio
Re: Show coverage day 3
« Reply #94 on: 19 Oct 2011, 09:13 pm »
Quote
Obviously Photoshop.
   

Do you think if I were to photoshop them I would make them so small :lol: The KR1610 tube is basically two 300B elements in a single envelope. These pictures are straight from my phone.


ceedee

  • Industry Participant
  • Posts: 701
    • Musical Reality
Re: Show coverage day 3
« Reply #95 on: 19 Oct 2011, 09:39 pm »
   

Do you think if I were to photoshop them I would make them so small :lol: The KR1610 tube is basically two 300B elements in a single envelope. These pictures are straight from my phone.




Just to imagine the size Don.

Cheers,

Cor

(working with KR tubes and -amplifiers for more than 15 years now)

Pez

Re: Show coverage day 3
« Reply #96 on: 19 Oct 2011, 09:47 pm »
I have heard the Krons every year at the show. This was the first year they didn't impress me in the one system I heard them in. The Zu audio system.

I wish I could have heard these on the VSA speakers!  :duh:

ceedee

  • Industry Participant
  • Posts: 701
    • Musical Reality
Re: Show coverage day 3
« Reply #97 on: 19 Oct 2011, 10:07 pm »
I have heard the Krons every year at the show. This was the first year they didn't impress me in the one system I heard them in. The Zu audio system.

I wish I could have heard these on the VSA speakers!  :duh:

I can imagine Pez, just wait a few month. They will be in Vegas connected to VSA again.

Cor




Bill Baker

  • Industry Participant
  • Posts: 4887
  • Purity Audio Design -Custom Design and Manufacturi
    • Musica Bella Audio
Re: Show coverage day 3
« Reply #98 on: 19 Oct 2011, 10:13 pm »
Nothing against Zu but many mentioned the same thing saying they really didn't put much effort into the room. Zu makes a great speaker as I have heard from a few of our customers.

Quote
I can imagine Pez, just wait a few month. They will be in Vegas connected to VSA again.

Hey Pez, if you are going to CES, you will be able to hear what we did late Saturday night at RMAF as it will be Purity Audio Design - KR Audio - Von Schweikert - Onda Cables showing at CES this year.

standub

Re: Show coverage day 3
« Reply #99 on: 19 Oct 2011, 10:38 pm »
Regardless of driver cost, those little Evolutions were the best small speaker that I heard at the show.  Amazing clarity.

Don't get me wrong about the cheap driver shot, they did sound good.  However I would be very worried about trying to play them any louder.  For a small room they would be fine.