Official Felix board/kit group buy thread

TomS · « **Reply #140 on:** 22 Apr 2008, 11:47 pm »

My PCB's arrived safely today. Thanks again!! Tom

WGH · « **Reply #141 on:** 24 Apr 2008, 02:56 pm »

My 4 boards, caps and CMC sets have arrived safely with the correct cap count.

Thanks again,

Wayne

poseidonsvoice · « **Reply #142 on:** 24 Apr 2008, 03:25 pm »

Brad,

PCB boards arrived safely yesterday. Wonderful quality. Thanks again. First place I'm going to use them is in my dual mono gain clone. Two FELIXES, one preceding each 400VA power transformer!

Anand.

Christopher Witmer · « **Reply #143 on:** 30 Apr 2008, 09:23 pm »

Brad, this is just to let you know that I got the package yesterday, thanks very much. There is something I'd like to confirm with you, so I have sent you a PM.
-- Chris Witmer in Tokyo

aurelius · « **Reply #144 on:** 1 May 2008, 09:03 am »

Brad, thank you so much. I received 10 boards, 10 CMCs and 60 capacitors yesterday in Australia. Thats the most serious dedication to packing I've ever seen!

audioferret · « **Reply #145 on:** 1 May 2008, 09:54 am »

My wife informed me that my parts arrived about a week ago, but I will not be able to get a count until late May.

-Almost Home

A Beer · « **Reply #146 on:** 2 May 2008, 12:53 am »

My Felix parts arrived this morning with all the correct quantities. Thanks for all your effort on this Brad. It's really appreciated!!!

Keith

MarkM · « **Reply #147 on:** 6 May 2008, 11:21 pm »

All counts are correct. Fantastic packing job, had to take considerable time, thank you very much.

Mark

kyrill · « **Reply #148 on:** 7 May 2008, 02:34 pm »

Brad, thank you very much. I received 20 boards -gonna help some friends

- x CMCs and x capacitors today in Holland. Thats the best dedication to packing I've ever met!

:thumb:Thx for the extra plastic very handy "opbergdoos" (box)dont even the know the name in Dutch

I will count tomorrow, must leave now
ok
I have the amount i ordered thx
Brad

BradJudy · « **Reply #149 on:** 7 May 2008, 03:42 pm »

Thanks for the kudos. I'm glad to hear that things have arrived overseas.

For the most part, it looks like things have gone smoothly, although there have been a couple of places where people revised their orders and this did not get properly reflected in the invoice and shipment.

whubbard · « **Reply #150 on:** 10 May 2008, 11:47 pm »

Hi Brad,

Finally got home to check on the parts. Really great packaging. All parts were there except one .01uF Vishay MKP 338 X1. I'm glad I was one of those missing parts, as I suggested that we count ourselves. I'm assuming you have one extra lying around. If you get a chance would you mind putting in the mail (normal envelope will work perfectly for this).

Truly exceptional job on this group buy.

Thanks,
West

BradJudy · « **Reply #151 on:** 11 May 2008, 12:03 am »

Sorry about the missing part West. I'll get one out to you.

jcai · « **Reply #152 on:** 4 Aug 2008, 11:55 pm »

Brad,

Newbie just joined the forum. Brought a SB Duet last week. I would like to order 5 kits. Would you please let me what to do?

Thanks in advance.

Jeff

TRADERXFAN · « **Reply #153 on:** 5 Aug 2008, 12:08 am »

The group buy is over, but I have extra boards and chokes, caps, etc unused for 5 sets, if you are interested to buy them off me for my cost.

-Tony

jr1414 · « **Reply #154 on:** 5 Aug 2008, 04:01 am »

I might be interested in enough to make 2-3 sets. PM me the details of what you've got left. Thanks.

mjosef · « **Reply #155 on:** 5 Aug 2008, 04:09 am »

I also got at least one(maybe two) complete set left over with the 9.3A coil. I also have an extra board since I have been using an alternate(much smaller) footprint in building my Felix.

jcai · « **Reply #156 on:** 5 Aug 2008, 04:33 pm »

Quote from: TRADERXFAN on 5 Aug 2008, 12:08 am

The group buy is over, but I have extra boards and chokes, caps, etc unused for 5 sets, if you are interested to buy them off me for my cost.

-Tony

Tony,

I sent you an email regarding the price and payment.

Thanks,

Jeff

jrebman · « **Reply #157 on:** 5 Aug 2008, 04:36 pm »

Quote from: mjosef on 5 Aug 2008, 04:09 am

I have been using an alternate(much smaller) footprint in building my Felix.

Can you describe this?

Thanks,

Jim

Gordy · « **Reply #158 on:** 5 Aug 2008, 04:51 pm »

Hi Jim,

Martin wired a point to point Felix directly to the back of a 120v wall recepticle, small caps closest to the Coilcraft CMC. Nice!

Gordy

Edit: He made a 90 degree upward bend immediately after the midling caps so the 1.0uF cap actually sits above the other two saving some "footprint" !

jrebman · « **Reply #159 on:** 5 Aug 2008, 05:03 pm »

Gordy,

Thanks -- got the picture.

-- Jim