Manic Moose (S2) - BDP's third major firmware release

0 Members and 1 Guest are viewing this topic. Read 448663 times.

Rod_S

  • Full Member
  • Posts: 1068
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1540 on: 31 Jan 2016, 03:12 pm »
OK it's back, phew, the messages in Media Player didn't say it was rebuilding the db. So everything is up and running but the 2 image folders still did not get re-created :D

Marius

Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1541 on: 31 Jan 2016, 05:14 pm »
yep, patience is a good thing, rebuilding sometimes takes a while, more with a bigger library..


if not, at least you're sure its not you now ;-) Maybe Chris can help.


Marius


OK it's back, phew, the messages in Media Player didn't say it was rebuilding the db. So everything is up and running but the 2 image folders still did not get re-created :D

Fernando

  • Jr. Member
  • Posts: 132
  • fernando _at_ -34.899705, -56.158880
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1542 on: 1 Feb 2016, 01:14 am »
OK it's back, phew, the messages in Media Player didn't say it was rebuilding the db. So everything is up and running but the 2 image folders still did not get re-created :D

rebuilding database n%, n+1%, n+2% info can be read under Artist View only ... unless I'm wrong ...
it would be nice to get to know it is doing so wherever in the MPlayer ... it took me several 'phew' to learn such.

and no ... it did not make my previous missing graphic files to appear ...  :|
(never deleted nor created a missing file)

Fernando

RonCH

  • Jr. Member
  • Posts: 160
Sharply crashing on S2.22 2016-01-11
« Reply #1543 on: 1 Feb 2016, 07:10 pm »
Hi Chris,

I think that shareplay is crashing since I installed S2.22 2016-01-11.  After a restart of the BDP-1 shareplay isn't running. 

The System Log is below.  I don't know if that helps.

regards

Ron


[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16-0.bpo.2-486 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.16.3-2~bpo70+1 (2014-09-21)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000f7affff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000f7b0000-0x000000000f7b2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000f7b3000-0x000000000f7bffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xf7b0 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0e400000-0x0e7fffff]
[ 0.000000] [mem 0x0e400000-0x0e7fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x08000000-0x0e3fffff]
[ 0.000000] [mem 0x08000000-0x0e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x07ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0f7affff]
[ 0.000000] [mem 0x0e800000-0x0f3fffff] page 2M
[ 0.000000] [mem 0x0f400000-0x0f7affff] page 4k
[ 0.000000] BRK [0x01727000, 0x01727fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x0ea23000-0x0f79ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F6140 000014 (v00 AMDGX3)
[ 0.000000] ACPI: RSDT 0x0F7B3040 000028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x0F7B30C0 000074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20140424/tbfadt-699)
[ 0.000000] ACPI: DSDT 0x0F7B3180 002B6E (v01 AMDGX3 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x0F7B0000 000040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 247MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0f7b0000
[ 0.000000] low ram: 0 - 0f7b0000
[ 0.000000] BRK [0x01728000, 0x01728fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x0f7affff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x0f7affff]
[ 0.000000] On node 0 totalpages: 63309
[ 0.000000] free_area_init_node: node 0, pgdat c15ffe20, node_mem_map ce833020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 464 pages used for memmap
[ 0.000000] Normal zone: 59312 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x9c10
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x0f7c0000-0xfffeffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
  • 0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62813
[ 0.000000] Kernel command line: boot=live noautologin noxautologin nouser debug nolocales quickreboot username=root hostname=bryston-bdp-1 union=aufs console=tty0
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 229780K/253236K available (4314K kernel code, 504K rwdata, 1384K rodata, 668K init, 412K bss, 23456K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xcffb0000 - 0xff7fe000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcf7b0000 ( 247 MB)
[ 0.000000] .init : 0xc1612000 - 0xc16b9000 ( 668 kB)
[ 0.000000] .data : 0xc1436f2f - 0xc1610180 (1892 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1436f2f (4315 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=ce406000 soft=ce408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 498.059 MHz processor
[ 0.004023] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.11 BogoMIPS (lpj=1992236)
[ 0.004160] pid_max: default: 32768 minimum: 301
[ 0.004277] ACPI: Core revision 20140424
[ 0.025099] ACPI: All ACPI Tables successfully acquired
[ 0.025256] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.028217] Security Framework initialized
[ 0.028321] AppArmor: AppArmor disabled by boot time parameter
[ 0.028393] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.028522] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.028602] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.029889] Initializing cgroup subsys memory
[ 0.029980] Initializing cgroup subsys devices
[ 0.032059] Initializing cgroup subsys freezer
[ 0.032140] Initializing cgroup subsys net_cls
[ 0.032238] Initializing cgroup subsys blkio
[ 0.032328] Initializing cgroup subsys perf_event
[ 0.032404] Initializing cgroup subsys net_prio
[ 0.032583] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.032583] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.032583] tlb_flushall_shift: -1
[ 0.032704] CPU: Geode(TM) Integrated Processor by AMD PCS (fam: 05, model: 0a, stepping: 02)
[ 0.039577] ftrace: allocating 19617 entries in 39 pages
[ 0.088340] Performance Events: no PMU driver, software events only.
[ 0.102791] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.103234] devtmpfs: initialized
[ 0.104910] PM: Registering ACPI NVS region [mem 0x0f7b0000-0x0f7b2fff] (12288 bytes)
[ 0.116328] pinctrl core: initialized pinctrl subsystem
[ 0.116840] NET: Registered protocol family 16
[ 0.117991] EISA bus registered
[ 0.118061] cpuidle: using governor ladder
[ 0.118131] cpuidle: using governor menu
[ 0.118924] ACPI: bus type PCI registered
[ 0.118989] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.120602] PCI: PCI BIOS revision 2.10 entry at 0xfa990, last bus=0
[ 0.120674] PCI: Using configuration type 1 for base access
[ 0.128247] ACPI: Added _OSI(Module Device)
[ 0.128321] ACPI: Added _OSI(Processor Device)
[ 0.128387] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128454] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.145954] ACPI: Interpreter enabled
[ 0.146037] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.146209] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.146377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.146557] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.146745] ACPI: (supports S0 S5)
[ 0.146809] ACPI: Using PIC for interrupt routing
[ 0.146988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.171781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.171885] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.171983] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.172577] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.173576] PCI host bridge to bus 0000:00
[ 0.173662] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.173738] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.173815] pci_bus 0000:00: root bus resource [io 0x0d00-0xac17]
[ 0.173898] pci_bus 0000:00: root bus resource [io 0xac20-0xffff]
[ 0.173976] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.174056] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff]
[ 0.174135] pci_bus 0000:00: root bus resource [mem 0x0f7c0000-0xfebfffff]
[ 0.174337] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[ 0.174543] pci 0000:00:01.0: reg 0x10: [io 0xac1c-0xac1f]
[ 0.174714] pci 0000:00:01.0: reg 0x14: [io 0x9e00-0x9e07]
[ 0.176062] pci 0000:00:01.1: [1022:2081] type 00 class 0x030000
[ 0.176420] pci 0000:00:01.1: reg 0x10: [mem 0xee000000-0xeeffffff]
[ 0.176693] pci 0000:00:01.1: reg 0x14: [mem 0xefff0000-0xefff3fff]
[ 0.176966] pci 0000:00:01.1: reg 0x18: [mem 0xeffec000-0xeffeffff]
[ 0.177237] pci 0000:00:01.1: reg 0x1c: [mem 0xeffe8000-0xeffebfff]
[ 0.177508] pci 0000:00:01.1: reg 0x20: [mem 0xefff8000-0xefffbfff]
[ 0.178714] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[ 0.179029] pci 0000:00:01.2: reg 0x10: [mem 0xefff4000-0xefff7fff]
[ 0.180865] pci 0000:00:0c.0: [1412:1724] type 00 class 0x040100
[ 0.180965] pci 0000:00:0c.0: reg 0x10: [io 0xff00-0xff1f]
[ 0.181049] pci 0000:00:0c.0: reg 0x14: [io 0xfe00-0xfe7f]
[ 0.181199] pci 0000:00:0c.0: supports D2
[ 0.181414] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.181912] pci 0000:00:0d.0: [1106:3053] type 00 class 0x020000
[ 0.182009] pci 0000:00:0d.0: reg 0x10: [io 0xfa00-0xfaff]
[ 0.182095] pci 0000:00:0d.0: reg 0x14: [mem 0xeffff000-0xeffff0ff]
[ 0.182248] pci 0000:00:0d.0: supports D1 D2
[ 0.182320] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.182997] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.183570] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[ 0.183947] pci 0000:00:0f.0: reg 0x10: [io 0x6000-0x6007]
[ 0.184266] pci 0000:00:0f.0: reg 0x14: [io 0x6100-0x61ff]
[ 0.184586] pci 0000:00:0f.0: reg 0x18: [io 0x6200-0x623f]
[ 0.184907] pci 0000:00:0f.0: reg 0x1c: [io 0x0000-0x001f]
[ 0.185232] pci 0000:00:0f.0: reg 0x20: [io 0x9d00-0x9d7f]
[ 0.185570] pci 0000:00:0f.0: reg 0x24: [io 0x9c00-0x9c3f]
[ 0.186659] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[ 0.187686] pci 0000:00:0f.2: reg 0x20: [io 0xfd00-0xfd0f]
[ 0.188209] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.188289] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.188367] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.188446] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.189313] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[ 0.189777] pci 0000:00:0f.4: reg 0x10: [mem 0xefffe000-0xefffefff]
[ 0.191444] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.191800] pci 0000:00:0f.4: System wakeup disabled by ACPI
[ 0.192488] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[ 0.192906] pci 0000:00:0f.5: reg 0x10: [mem 0xefffd000-0xefffdfff]
[ 0.194557] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.194914] pci 0000:00:0f.5: System wakeup disabled by ACPI
[ 0.195452] pci_bus 0000:00: on NUMA node 0
[ 0.196714] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.197836] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[ 0.198928] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
[ 0.200107] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[ 0.205012] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.205758] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[ 0.205848] vgaarb: loaded
[ 0.205907] vgaarb: bridge control possible 0000:00:01.1
[ 0.206471] PCI: Using ACPI for IRQ routing
[ 0.206538] PCI: pci_cache_line_size set to 32 bytes
[ 0.206647] pci 0000:00:01.0: can't claim BAR 0 [io 0xac1c-0xac1f]: no compatible bridge window
[ 0.207102] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.207175] e820: reserve RAM buffer [mem 0x0f7b0000-0x0fffffff]
[ 0.208635] Switched to clocksource pit
[ 0.250240] pnp: PnP ACPI init
[ 0.250428] ACPI: bus type PNP registered
[ 0.251175] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.251262] system 00:00: [mem 0x0f7b0000-0x0f7bffff] could not be reserved
[ 0.251345] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.251485] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.251568] system 00:00: [mem 0x00100000-0x0f7affff] could not be reserved
[ 0.251650] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.251734] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.253173] pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io 0x0000-0x001f]
[ 0.253575] system 00:01: [io 0x0b78-0x0b7b] has been reserved
[ 0.253656] system 00:01: [io 0x0f78-0x0f7b] has been reserved
[ 0.253735] system 00:01: [io 0x0a78-0x0a7b] has been reserved
[ 0.253814] system 00:01: [io 0x0e78-0x0e7b] has been reserved
[ 0.253893] system 00:01: [io 0x0bbc-0x0bbf] has been reserved
[ 0.253972] system 00:01: [io 0x0fbc-0x0fbf] has been reserved
[ 0.254050] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.254131] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.254487] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.257085] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.258534] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.260719] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.261388] pnp: PnP ACPI: found 6 devices
[ 0.261453] ACPI: bus type PNP unregistered
[ 0.261533] PnPBIOS: Disabled by ACPI PNP
[ 0.311927] Switched to clocksource acpi_pm
[ 0.312070] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f]
[ 0.312219] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.312295] pci_bus 0000:00: resource 5 [io 0x0d00-0xac17]
[ 0.312371] pci_bus 0000:00: resource 6 [io 0xac20-0xffff]
[ 0.312448] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.312526] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000dffff]
[ 0.312605] pci_bus 0000:00: resource 9 [mem 0x0f7c0000-0xfebfffff]
[ 0.312794] NET: Registered protocol family 2
[ 0.314543] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.314655] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.314756] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.314926] TCP: reno registered
[ 0.314992] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.315076] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.315435] NET: Registered protocol family 1
[ 0.315660] pci 0000:00:01.1: Boot video device
[ 0.318207] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
[ 0.318285] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.318353] PCI: setting IRQ 11 as level-triggered
[ 0.389007] PCI: CLS 32 bytes, default 32
[ 0.389372] Unpacking initramfs...
[ 2.986208] Freeing initrd memory: 13812K (cea23000 - cf7a0000)
[ 2.987025] microcode: AMD CPU family 0x5 not supported
[ 2.989321] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 2.989510] audit: initializing netlink subsys (disabled)
[ 2.989645] audit: type=2000 audit(1454350359.987:1): initialized
[ 2.991231] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.991417] zbud: loaded
[ 2.991751] VFS: Disk quotas dquot_6.5.2
[ 2.991861] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.992225] msgmni has been set to 475
[ 2.994266] alg: No test for stdrng (krng)
[ 2.994461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.994767] io scheduler noop registered
[ 2.994851] io scheduler deadline registered
[ 2.995165] io scheduler cfq registered (default)
[ 2.995961] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.996247] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.996916] GHES: HEST is not enabled!
[ 2.997109] isapnp: Scanning for PnP cards...
[ 3.352397] isapnp: No Plug & Play device found
[ 3.352766] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.373682] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.394796] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.397047] Linux agpgart interface v0.103
[ 3.398759] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.401599] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.401683] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.402809] mousedev: PS/2 mouse device common for all mice
[ 3.403847] rtc_cmos 00:02: RTC can wake from S4
[ 3.404477] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.404603] rtc_cmos 00:02: alarms up to one day, 242 bytes nvram
[ 3.405033] platform eisa.0: Probing EISA bus 0
[ 3.405108] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 3.405189] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 3.405267] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 3.405345] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 3.405423] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 3.405501] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 3.405579] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 3.405657] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 3.405735] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 3.405811] platform eisa.0: EISA: Detected 0 cards
[ 3.405898] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.406805] TCP: cubic registered
[ 3.406927] NET: Registered protocol family 10
[ 3.408167] mip6: Mobile IPv6
[ 3.408249] NET: Registered protocol family 17
[ 3.408351] mpls_gso: MPLS GSO support
[ 3.408762] Using IPI Shortcut mode
[ 3.409682] registered taskstats version 1
[ 3.411303] rtc_cmos 00:02: setting system clock to 2016-02-01 18:12:40 UTC (1454350360)
[ 3.411749] PM: Hibernation image not present or could not be loaded.
[ 3.412914] Freeing unused kernel memory: 668K (c1612000 - c16b9000)
[ 3.413071] Write protecting the kernel text: 4316k
[ 3.413375] Write protecting the kernel read-only data: 1388k
[ 3.486001] udevd[49]: starting version 175
[ 3.688736] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 3.691147] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 3.812470] via-rhine 0000:00:0d.0 eth0: VIA Rhine III (Management Adapter) at 0x1fa00, 00:0d:b9:0d:ca:44, IRQ 11
[ 3.813351] via-rhine 0000:00:0d.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1
[ 3.821953] SCSI subsystem initialized
[ 3.899407] ACPI: bus type USB registered
[ 3.899729] usbcore: registered new interface driver usbfs
[ 3.899900] usbcore: registered new interface driver hub
[ 3.908226] usbcore: registered new device driver usb
[ 3.919127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.947509] ehci-pci: EHCI PCI platform driver
[ 3.953863] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.955155] ohci-pci: OHCI PCI platform driver
[ 3.980303] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 3.980425] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.980828] ehci-pci 0000:00:0f.5: irq 11, io mem 0xefffd000
[ 3.984125] tsc: Refined TSC clocksource calibration: 498.050 MHz
[ 3.992137] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.992472] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.992553] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.992637] usb usb1: Product: EHCI Host Controller
[ 3.992708] usb usb1: Manufacturer: Linux 3.16-0.bpo.2-486 ehci_hcd
[ 3.992785] usb usb1: SerialNumber: 0000:00:0f.5
[ 4.006681] hub 1-0:1.0: USB hub found
[ 4.006801] hub 1-0:1.0: 4 ports detected
[ 4.030647] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[ 4.030762] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 4.031379] ohci-pci 0000:00:0f.4: irq 11, io mem 0xefffe000
[ 4.050936] libata version 3.00 loaded.
[ 4.103204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.103297] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.103381] usb usb2: Product: OHCI PCI host controller
[ 4.103453] usb usb2: Manufacturer: Linux 3.16-0.bpo.2-486 ohci_hcd
[ 4.103528] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.107871] hub 2-0:1.0: USB hub found
[ 4.109903] hub 2-0:1.0: 4 ports detected
[ 4.115137] pata_amd 0000:00:0f.2: version 0.4.1
[ 4.127712] scsi0 : pata_amd
[ 4.137090] scsi1 : pata_amd
[ 4.137672] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
[ 4.137749] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
[ 4.308408] ata1.00: CFA: ELITE PRO CF CARD 4GB, 20091113, max UDMA/66
[ 4.308497] ata1.00: 7847280 sectors, multi 0: LBA
[ 4.316121] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 4.324369] ata1.00: configured for UDMA/66
[ 4.324889] scsi 0:0:0:0: Direct-Access ATA ELITE PRO CF CAR 1113 PQ: 0 ANSI: 5
[ 4.327369] ata2: port disabled--ignoring
[ 4.374086] sd 0:0:0:0: [sda] 7847280 512-byte logical blocks: (4.01 GB/3.74 GiB)
[ 4.374445] sd 0:0:0:0: [sda] Write Protect is off
[ 4.374528] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.374713] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.378553] sda: sda1 sda2
[ 4.381145] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.392817] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.578567] usb 1-3: New USB device found, idVendor=058f, idProduct=6387
[ 4.578662] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.578745] usb 1-3: Product: Mass Storage
[ 4.578817] usb 1-3: Manufacturer: Generic
[ 4.578891] usb 1-3: SerialNumber: AMC00000003000002593
[ 4.607543] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 4.607922] scsi2 : usb-storage 1-3:1.0
[ 4.608660] usbcore: registered new interface driver usb-storage
[ 4.988105] Switched to clocksource tsc
[ 5.084475] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 5.155337] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.164566] aufs 3.16-20140908
[ 5.288385] loop: module loaded
[ 5.609130] scsi 2:0:0:0: Direct-Access Flash Drive AU USB20 8.20 PQ: 0 ANSI: 2
[ 5.614051] sd 2:0:0:0: [sdb] 31883264 512-byte logical blocks: (16.3 GB/15.2 GiB)
[ 5.614907] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.615049] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5.615940] sd 2:0:0:0: [sdb] No Caching mode page found
[ 5.616125] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 5.624719] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.872653] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.910527] aufs test_add:305:busybox[262]: uid/gid/perm //filesystem.squashfs/ 113/117/0755, 0/0/0755
[ 6.042093] sdb: sdb1
[ 6.051043] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 6.339993] random: nonblocking pool is initialized
[ 9.532979] udevd[570]: starting version 175
[ 10.086299] AMD Geode RNG detected
[ 10.188392] ACPI Warning: SystemIO range 0x00006100-0x000061ff conflicts with OpRegion 0x00006100-0x000061ff (\_SB_.GPIO) (20140424/utaddress-258)
[ 10.188593] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.188817] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
[ 10.188938] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
[ 10.208828] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 10.208933] ACPI: Power Button [PWRF]
[ 10.236674] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 10.236759] PCI: setting IRQ 10 as level-triggered
[ 10.237271] lxfb 0000:00:01.1: 8192 KB of video memory at 0xee000000
[ 10.337040] ACPI: AC Adapter [AC] (on-line)
[ 10.700542] fbcon: Geode LX (fb0) is primary device
[ 10.711144] Console: switching to colour frame buffer device 80x30
[ 10.720281] fb0: Geode LX frame buffer device
[ 10.773156] parport_pc 00:05: reported by Plug and Play ACPI
[ 10.773511] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.979110] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 11.252173] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[ 12.178682] ACPI: PCI Interrupt Link [LNKC] BIOS reported IRQ 0, using IRQ 10
[ 12.179044] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 12.235143] snd_ice1724 0000:00:0c.0: juli@: analog I/O detected
[ 39.982290] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 40.015092] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 42.074983] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 42.107895] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.


RonCH

  • Jr. Member
  • Posts: 160
Re: Sharply crashing on S2.22 2016-01-11
« Reply #1544 on: 1 Feb 2016, 07:28 pm »
Hi Chris,

I think that shareplay is crashing since I installed S2.22 2016-01-11.  After a restart of the BDP-1 shareplay isn't running. 

The System Log is below.  I don't know if that helps.

regards

Ron


[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16-0.bpo.2-486 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.16.3-2~bpo70+1 (2014-09-21)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000f7affff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000f7b0000-0x000000000f7b2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000f7b3000-0x000000000f7bffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xf7b0 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0e400000-0x0e7fffff]
[ 0.000000] [mem 0x0e400000-0x0e7fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x08000000-0x0e3fffff]
[ 0.000000] [mem 0x08000000-0x0e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x07ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0f7affff]
[ 0.000000] [mem 0x0e800000-0x0f3fffff] page 2M
[ 0.000000] [mem 0x0f400000-0x0f7affff] page 4k
[ 0.000000] BRK [0x01727000, 0x01727fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x0ea23000-0x0f79ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F6140 000014 (v00 AMDGX3)
[ 0.000000] ACPI: RSDT 0x0F7B3040 000028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x0F7B30C0 000074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20140424/tbfadt-699)
[ 0.000000] ACPI: DSDT 0x0F7B3180 002B6E (v01 AMDGX3 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x0F7B0000 000040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 247MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0f7b0000
[ 0.000000] low ram: 0 - 0f7b0000
[ 0.000000] BRK [0x01728000, 0x01728fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x0f7affff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x0f7affff]
[ 0.000000] On node 0 totalpages: 63309
[ 0.000000] free_area_init_node: node 0, pgdat c15ffe20, node_mem_map ce833020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 464 pages used for memmap
[ 0.000000] Normal zone: 59312 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x9c10
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x0f7c0000-0xfffeffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
  • 0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62813
[ 0.000000] Kernel command line: boot=live noautologin noxautologin nouser debug nolocales quickreboot username=root hostname=bryston-bdp-1 union=aufs console=tty0
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 229780K/253236K available (4314K kernel code, 504K rwdata, 1384K rodata, 668K init, 412K bss, 23456K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xcffb0000 - 0xff7fe000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcf7b0000 ( 247 MB)
[ 0.000000] .init : 0xc1612000 - 0xc16b9000 ( 668 kB)
[ 0.000000] .data : 0xc1436f2f - 0xc1610180 (1892 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1436f2f (4315 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=ce406000 soft=ce408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 498.059 MHz processor
[ 0.004023] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.11 BogoMIPS (lpj=1992236)
[ 0.004160] pid_max: default: 32768 minimum: 301
[ 0.004277] ACPI: Core revision 20140424
[ 0.025099] ACPI: All ACPI Tables successfully acquired
[ 0.025256] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.028217] Security Framework initialized
[ 0.028321] AppArmor: AppArmor disabled by boot time parameter
[ 0.028393] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.028522] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.028602] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.029889] Initializing cgroup subsys memory
[ 0.029980] Initializing cgroup subsys devices
[ 0.032059] Initializing cgroup subsys freezer
[ 0.032140] Initializing cgroup subsys net_cls
[ 0.032238] Initializing cgroup subsys blkio
[ 0.032328] Initializing cgroup subsys perf_event
[ 0.032404] Initializing cgroup subsys net_prio
[ 0.032583] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.032583] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.032583] tlb_flushall_shift: -1
[ 0.032704] CPU: Geode(TM) Integrated Processor by AMD PCS (fam: 05, model: 0a, stepping: 02)
[ 0.039577] ftrace: allocating 19617 entries in 39 pages
[ 0.088340] Performance Events: no PMU driver, software events only.
[ 0.102791] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.103234] devtmpfs: initialized
[ 0.104910] PM: Registering ACPI NVS region [mem 0x0f7b0000-0x0f7b2fff] (12288 bytes)
[ 0.116328] pinctrl core: initialized pinctrl subsystem
[ 0.116840] NET: Registered protocol family 16
[ 0.117991] EISA bus registered
[ 0.118061] cpuidle: using governor ladder
[ 0.118131] cpuidle: using governor menu
[ 0.118924] ACPI: bus type PCI registered
[ 0.118989] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.120602] PCI: PCI BIOS revision 2.10 entry at 0xfa990, last bus=0
[ 0.120674] PCI: Using configuration type 1 for base access
[ 0.128247] ACPI: Added _OSI(Module Device)
[ 0.128321] ACPI: Added _OSI(Processor Device)
[ 0.128387] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128454] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.145954] ACPI: Interpreter enabled
[ 0.146037] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.146209] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.146377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.146557] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.146745] ACPI: (supports S0 S5)
[ 0.146809] ACPI: Using PIC for interrupt routing
[ 0.146988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.171781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.171885] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.171983] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.172577] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.173576] PCI host bridge to bus 0000:00
[ 0.173662] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.173738] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.173815] pci_bus 0000:00: root bus resource [io 0x0d00-0xac17]
[ 0.173898] pci_bus 0000:00: root bus resource [io 0xac20-0xffff]
[ 0.173976] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.174056] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff]
[ 0.174135] pci_bus 0000:00: root bus resource [mem 0x0f7c0000-0xfebfffff]
[ 0.174337] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[ 0.174543] pci 0000:00:01.0: reg 0x10: [io 0xac1c-0xac1f]
[ 0.174714] pci 0000:00:01.0: reg 0x14: [io 0x9e00-0x9e07]
[ 0.176062] pci 0000:00:01.1: [1022:2081] type 00 class 0x030000
[ 0.176420] pci 0000:00:01.1: reg 0x10: [mem 0xee000000-0xeeffffff]
[ 0.176693] pci 0000:00:01.1: reg 0x14: [mem 0xefff0000-0xefff3fff]
[ 0.176966] pci 0000:00:01.1: reg 0x18: [mem 0xeffec000-0xeffeffff]
[ 0.177237] pci 0000:00:01.1: reg 0x1c: [mem 0xeffe8000-0xeffebfff]
[ 0.177508] pci 0000:00:01.1: reg 0x20: [mem 0xefff8000-0xefffbfff]
[ 0.178714] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[ 0.179029] pci 0000:00:01.2: reg 0x10: [mem 0xefff4000-0xefff7fff]
[ 0.180865] pci 0000:00:0c.0: [1412:1724] type 00 class 0x040100
[ 0.180965] pci 0000:00:0c.0: reg 0x10: [io 0xff00-0xff1f]
[ 0.181049] pci 0000:00:0c.0: reg 0x14: [io 0xfe00-0xfe7f]
[ 0.181199] pci 0000:00:0c.0: supports D2
[ 0.181414] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.181912] pci 0000:00:0d.0: [1106:3053] type 00 class 0x020000
[ 0.182009] pci 0000:00:0d.0: reg 0x10: [io 0xfa00-0xfaff]
[ 0.182095] pci 0000:00:0d.0: reg 0x14: [mem 0xeffff000-0xeffff0ff]
[ 0.182248] pci 0000:00:0d.0: supports D1 D2
[ 0.182320] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.182997] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.183570] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[ 0.183947] pci 0000:00:0f.0: reg 0x10: [io 0x6000-0x6007]
[ 0.184266] pci 0000:00:0f.0: reg 0x14: [io 0x6100-0x61ff]
[ 0.184586] pci 0000:00:0f.0: reg 0x18: [io 0x6200-0x623f]
[ 0.184907] pci 0000:00:0f.0: reg 0x1c: [io 0x0000-0x001f]
[ 0.185232] pci 0000:00:0f.0: reg 0x20: [io 0x9d00-0x9d7f]
[ 0.185570] pci 0000:00:0f.0: reg 0x24: [io 0x9c00-0x9c3f]
[ 0.186659] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[ 0.187686] pci 0000:00:0f.2: reg 0x20: [io 0xfd00-0xfd0f]
[ 0.188209] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.188289] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.188367] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.188446] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.189313] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[ 0.189777] pci 0000:00:0f.4: reg 0x10: [mem 0xefffe000-0xefffefff]
[ 0.191444] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.191800] pci 0000:00:0f.4: System wakeup disabled by ACPI
[ 0.192488] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[ 0.192906] pci 0000:00:0f.5: reg 0x10: [mem 0xefffd000-0xefffdfff]
[ 0.194557] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.194914] pci 0000:00:0f.5: System wakeup disabled by ACPI
[ 0.195452] pci_bus 0000:00: on NUMA node 0
[ 0.196714] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.197836] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[ 0.198928] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
[ 0.200107] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[ 0.205012] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.205758] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[ 0.205848] vgaarb: loaded
[ 0.205907] vgaarb: bridge control possible 0000:00:01.1
[ 0.206471] PCI: Using ACPI for IRQ routing
[ 0.206538] PCI: pci_cache_line_size set to 32 bytes
[ 0.206647] pci 0000:00:01.0: can't claim BAR 0 [io 0xac1c-0xac1f]: no compatible bridge window
[ 0.207102] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.207175] e820: reserve RAM buffer [mem 0x0f7b0000-0x0fffffff]
[ 0.208635] Switched to clocksource pit
[ 0.250240] pnp: PnP ACPI init
[ 0.250428] ACPI: bus type PNP registered
[ 0.251175] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.251262] system 00:00: [mem 0x0f7b0000-0x0f7bffff] could not be reserved
[ 0.251345] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.251485] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.251568] system 00:00: [mem 0x00100000-0x0f7affff] could not be reserved
[ 0.251650] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.251734] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.253173] pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io 0x0000-0x001f]
[ 0.253575] system 00:01: [io 0x0b78-0x0b7b] has been reserved
[ 0.253656] system 00:01: [io 0x0f78-0x0f7b] has been reserved
[ 0.253735] system 00:01: [io 0x0a78-0x0a7b] has been reserved
[ 0.253814] system 00:01: [io 0x0e78-0x0e7b] has been reserved
[ 0.253893] system 00:01: [io 0x0bbc-0x0bbf] has been reserved
[ 0.253972] system 00:01: [io 0x0fbc-0x0fbf] has been reserved
[ 0.254050] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.254131] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.254487] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.257085] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.258534] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.260719] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.261388] pnp: PnP ACPI: found 6 devices
[ 0.261453] ACPI: bus type PNP unregistered
[ 0.261533] PnPBIOS: Disabled by ACPI PNP
[ 0.311927] Switched to clocksource acpi_pm
[ 0.312070] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f]
[ 0.312219] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.312295] pci_bus 0000:00: resource 5 [io 0x0d00-0xac17]
[ 0.312371] pci_bus 0000:00: resource 6 [io 0xac20-0xffff]
[ 0.312448] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.312526] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000dffff]
[ 0.312605] pci_bus 0000:00: resource 9 [mem 0x0f7c0000-0xfebfffff]
[ 0.312794] NET: Registered protocol family 2
[ 0.314543] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.314655] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.314756] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.314926] TCP: reno registered
[ 0.314992] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.315076] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.315435] NET: Registered protocol family 1
[ 0.315660] pci 0000:00:01.1: Boot video device
[ 0.318207] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
[ 0.318285] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.318353] PCI: setting IRQ 11 as level-triggered
[ 0.389007] PCI: CLS 32 bytes, default 32
[ 0.389372] Unpacking initramfs...
[ 2.986208] Freeing initrd memory: 13812K (cea23000 - cf7a0000)
[ 2.987025] microcode: AMD CPU family 0x5 not supported
[ 2.989321] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 2.989510] audit: initializing netlink subsys (disabled)
[ 2.989645] audit: type=2000 audit(1454350359.987:1): initialized
[ 2.991231] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.991417] zbud: loaded
[ 2.991751] VFS: Disk quotas dquot_6.5.2
[ 2.991861] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.992225] msgmni has been set to 475
[ 2.994266] alg: No test for stdrng (krng)
[ 2.994461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.994767] io scheduler noop registered
[ 2.994851] io scheduler deadline registered
[ 2.995165] io scheduler cfq registered (default)
[ 2.995961] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.996247] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.996916] GHES: HEST is not enabled!
[ 2.997109] isapnp: Scanning for PnP cards...
[ 3.352397] isapnp: No Plug & Play device found
[ 3.352766] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.373682] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.394796] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.397047] Linux agpgart interface v0.103
[ 3.398759] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.401599] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.401683] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.402809] mousedev: PS/2 mouse device common for all mice
[ 3.403847] rtc_cmos 00:02: RTC can wake from S4
[ 3.404477] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.404603] rtc_cmos 00:02: alarms up to one day, 242 bytes nvram
[ 3.405033] platform eisa.0: Probing EISA bus 0
[ 3.405108] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 3.405189] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 3.405267] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 3.405345] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 3.405423] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 3.405501] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 3.405579] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 3.405657] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 3.405735] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 3.405811] platform eisa.0: EISA: Detected 0 cards
[ 3.405898] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.406805] TCP: cubic registered
[ 3.406927] NET: Registered protocol family 10
[ 3.408167] mip6: Mobile IPv6
[ 3.408249] NET: Registered protocol family 17
[ 3.408351] mpls_gso: MPLS GSO support
[ 3.408762] Using IPI Shortcut mode
[ 3.409682] registered taskstats version 1
[ 3.411303] rtc_cmos 00:02: setting system clock to 2016-02-01 18:12:40 UTC (1454350360)
[ 3.411749] PM: Hibernation image not present or could not be loaded.
[ 3.412914] Freeing unused kernel memory: 668K (c1612000 - c16b9000)
[ 3.413071] Write protecting the kernel text: 4316k
[ 3.413375] Write protecting the kernel read-only data: 1388k
[ 3.486001] udevd[49]: starting version 175
[ 3.688736] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 3.691147] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 3.812470] via-rhine 0000:00:0d.0 eth0: VIA Rhine III (Management Adapter) at 0x1fa00, 00:0d:b9:0d:ca:44, IRQ 11
[ 3.813351] via-rhine 0000:00:0d.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1
[ 3.821953] SCSI subsystem initialized
[ 3.899407] ACPI: bus type USB registered
[ 3.899729] usbcore: registered new interface driver usbfs
[ 3.899900] usbcore: registered new interface driver hub
[ 3.908226] usbcore: registered new device driver usb
[ 3.919127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.947509] ehci-pci: EHCI PCI platform driver
[ 3.953863] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.955155] ohci-pci: OHCI PCI platform driver
[ 3.980303] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 3.980425] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.980828] ehci-pci 0000:00:0f.5: irq 11, io mem 0xefffd000
[ 3.984125] tsc: Refined TSC clocksource calibration: 498.050 MHz
[ 3.992137] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.992472] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.992553] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.992637] usb usb1: Product: EHCI Host Controller
[ 3.992708] usb usb1: Manufacturer: Linux 3.16-0.bpo.2-486 ehci_hcd
[ 3.992785] usb usb1: SerialNumber: 0000:00:0f.5
[ 4.006681] hub 1-0:1.0: USB hub found
[ 4.006801] hub 1-0:1.0: 4 ports detected
[ 4.030647] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[ 4.030762] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 4.031379] ohci-pci 0000:00:0f.4: irq 11, io mem 0xefffe000
[ 4.050936] libata version 3.00 loaded.
[ 4.103204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.103297] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.103381] usb usb2: Product: OHCI PCI host controller
[ 4.103453] usb usb2: Manufacturer: Linux 3.16-0.bpo.2-486 ohci_hcd
[ 4.103528] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.107871] hub 2-0:1.0: USB hub found
[ 4.109903] hub 2-0:1.0: 4 ports detected
[ 4.115137] pata_amd 0000:00:0f.2: version 0.4.1
[ 4.127712] scsi0 : pata_amd
[ 4.137090] scsi1 : pata_amd
[ 4.137672] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
[ 4.137749] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
[ 4.308408] ata1.00: CFA: ELITE PRO CF CARD 4GB, 20091113, max UDMA/66
[ 4.308497] ata1.00: 7847280 sectors, multi 0: LBA
[ 4.316121] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 4.324369] ata1.00: configured for UDMA/66
[ 4.324889] scsi 0:0:0:0: Direct-Access ATA ELITE PRO CF CAR 1113 PQ: 0 ANSI: 5
[ 4.327369] ata2: port disabled--ignoring
[ 4.374086] sd 0:0:0:0: [sda] 7847280 512-byte logical blocks: (4.01 GB/3.74 GiB)
[ 4.374445] sd 0:0:0:0: [sda] Write Protect is off
[ 4.374528] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.374713] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.378553] sda: sda1 sda2
[ 4.381145] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.392817] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.578567] usb 1-3: New USB device found, idVendor=058f, idProduct=6387
[ 4.578662] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.578745] usb 1-3: Product: Mass Storage
[ 4.578817] usb 1-3: Manufacturer: Generic
[ 4.578891] usb 1-3: SerialNumber: AMC00000003000002593
[ 4.607543] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 4.607922] scsi2 : usb-storage 1-3:1.0
[ 4.608660] usbcore: registered new interface driver usb-storage
[ 4.988105] Switched to clocksource tsc
[ 5.084475] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 5.155337] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.164566] aufs 3.16-20140908
[ 5.288385] loop: module loaded
[ 5.609130] scsi 2:0:0:0: Direct-Access Flash Drive AU USB20 8.20 PQ: 0 ANSI: 2
[ 5.614051] sd 2:0:0:0: [sdb] 31883264 512-byte logical blocks: (16.3 GB/15.2 GiB)
[ 5.614907] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.615049] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5.615940] sd 2:0:0:0: [sdb] No Caching mode page found
[ 5.616125] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 5.624719] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.872653] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.910527] aufs test_add:305:busybox[262]: uid/gid/perm //filesystem.squashfs/ 113/117/0755, 0/0/0755
[ 6.042093] sdb: sdb1
[ 6.051043] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 6.339993] random: nonblocking pool is initialized
[ 9.532979] udevd[570]: starting version 175
[ 10.086299] AMD Geode RNG detected
[ 10.188392] ACPI Warning: SystemIO range 0x00006100-0x000061ff conflicts with OpRegion 0x00006100-0x000061ff (\_SB_.GPIO) (20140424/utaddress-258)
[ 10.188593] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.188817] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
[ 10.188938] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
[ 10.208828] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 10.208933] ACPI: Power Button [PWRF]
[ 10.236674] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 10.236759] PCI: setting IRQ 10 as level-triggered
[ 10.237271] lxfb 0000:00:01.1: 8192 KB of video memory at 0xee000000
[ 10.337040] ACPI: AC Adapter [AC] (on-line)
[ 10.700542] fbcon: Geode LX (fb0) is primary device
[ 10.711144] Console: switching to colour frame buffer device 80x30
[ 10.720281] fb0: Geode LX frame buffer device
[ 10.773156] parport_pc 00:05: reported by Plug and Play ACPI
[ 10.773511] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.979110] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 11.252173] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[ 12.178682] ACPI: PCI Interrupt Link [LNKC] BIOS reported IRQ 0, using IRQ 10
[ 12.179044] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 12.235143] snd_ice1724 0000:00:0c.0: juli@: analog I/O detected
[ 39.982290] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 40.015092] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 42.074983] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 42.107895] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Or maybe it just that any update to Services seems to be lost after a restart.

So if I start or stop services, then when I restart the BDP any changes are lost.  I back to how it was before I started and stopped some services.

 

unincognito

  • Industry Participant
  • Posts: 2061
    • bryston.com
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1545 on: 2 Feb 2016, 04:33 am »
Been working fine for my units, it takes a minute after the MPD Ready message appears.  you could always check the user space partition and make sure its not in a read only state (disk information)

RonCH

  • Jr. Member
  • Posts: 160
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1546 on: 2 Feb 2016, 05:50 am »
When I do a verify on USER I get:

Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.

More information about this error may be available in the server error log.

Apache/2.2.22 (Debian) Server at bryston-bdp-1.local Port 80

unincognito

  • Industry Participant
  • Posts: 2061
    • bryston.com
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1547 on: 2 Feb 2016, 07:31 pm »
When I do a verify on USER I get:

Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.

More information about this error may be available in the server error log.

Apache/2.2.22 (Debian) Server at bryston-bdp-1.local Port 80

whether or not the partition is in a read only state is indicated at the bottom of the page, below the buttons

RonCH

  • Jr. Member
  • Posts: 160
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1548 on: 2 Feb 2016, 08:06 pm »
whether or not the partition is in a read only state is indicated at the bottom of the page, below the buttons

As always thanks for your reply.

It was rw.  I reset the bdp to factory settings and now it looks ok.   What's a little strange now though is that when I try to set my flash drive as a scratch I get the message: Can not use a system volume as the scratch drive
I can't remember having any problems before.  It seems to format ok:

ormating disk: /dev/sdb1 as b
Checking for mounted volumes...
No volumes mounted on device: /dev/sdb1
16+0 records in
16+0 records out
16777216 bytes (17 MB) copied, 2.48232 s, 6.8 MB/s
Starting Stage 1: Checking number of partitions on disk....

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/sdb doesn't contain a valid partition table
Starting Stage 2: Creating New Partition Table....

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xcc5d33f1.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-31883263, default 2048): Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-31883263, default 31883263): Using default value 31883263

Command (m for help): Selected partition 1
Hex code (type L to list codes): Changed system type of partition 1 to b (W95 FAT32)

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: If you have created or modified any DOS 6.x
partitions, please see the fdisk manual page for additional
information.
Syncing disks.

Starting Stage 3: Formating Partition....
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
mkfs.fat 3.0.23 (2013-10-15)

Starting Stage 4: Installing Bootloader....
MOUNT:
COPY:
DEV.MAP:
GRUB:Installation finished. No error reported.
This is the contents of the device map /mnt/tmp/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.

(hd1) /dev/sdb

Starting Stage 5: Check Disk....
fsck from util-linux 2.20.1
dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN
/dev/sdb1: 17 files, 36/1990630 clusters

BRYSTON DONE

RonCH

  • Jr. Member
  • Posts: 160
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1549 on: 3 Feb 2016, 11:28 am »
As always thanks for your reply.

It was rw.  I reset the bdp to factory settings and now it looks ok.   What's a little strange now though is that when I try to set my flash drive as a scratch I get the message: Can not use a system volume as the scratch drive
I can't remember having any problems before.  It seems to format ok:

ormating disk: /dev/sdb1 as b
Checking for mounted volumes...
No volumes mounted on device: /dev/sdb1
16+0 records in
16+0 records out
16777216 bytes (17 MB) copied, 2.48232 s, 6.8 MB/s
Starting Stage 1: Checking number of partitions on disk....

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/sdb doesn't contain a valid partition table
Starting Stage 2: Creating New Partition Table....

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xcc5d33f1.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-31883263, default 2048): Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-31883263, default 31883263): Using default value 31883263

Command (m for help): Selected partition 1
Hex code (type L to list codes): Changed system type of partition 1 to b (W95 FAT32)

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: If you have created or modified any DOS 6.x
partitions, please see the fdisk manual page for additional
information.
Syncing disks.

Starting Stage 3: Formating Partition....
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
mkfs.fat 3.0.23 (2013-10-15)

Starting Stage 4: Installing Bootloader....
MOUNT:
COPY:
DEV.MAP:
GRUB:Installation finished. No error reported.
This is the contents of the device map /mnt/tmp/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.

(hd1) /dev/sdb

Starting Stage 5: Check Disk....
fsck from util-linux 2.20.1
dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN
/dev/sdb1: 17 files, 36/1990630 clusters

BRYSTON DONE

I was too quick to say that it worked. 

now it's not starting up.  It's getting to Cleaning up  and no further.

I tried reinstalling the firmware, that has made no difference.  Is it time to send it in for repair?






unincognito

  • Industry Participant
  • Posts: 2061
    • bryston.com
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1550 on: 3 Feb 2016, 07:45 pm »
Please see page 24 of the manic moose manual

http://bryston.com/PDF/Manuals/BDP-2_MM_Manual.pdf

RonCH

  • Jr. Member
  • Posts: 160
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1551 on: 3 Feb 2016, 08:47 pm »

cmarinsr

  • Jr. Member
  • Posts: 32
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1552 on: 5 Feb 2016, 02:36 am »
Hi Chris,

Any chance for Roon RAAT to make it back to the BDP firmware any time soon (was removed from the latest beta) or should I go ahead and cancel my subscription?

Thanks,
Carmen

Krutsch

  • Full Member
  • Posts: 568
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1553 on: 5 Feb 2016, 05:22 pm »
FYI, With the last set of Beta releases and the current, stable release, album art generation for the Artist View is broken (again).

This is on my FLAC/AAC/MP3 collection that used to reliably generate album art. Now, any album with a title containing non English characters fails to build thumbnails. Such as:

Album title: Liszt: Piano Sonata In B Minor, Funérailles, Etc.
Artist: CéU

... accent characters seem to be the problem, whether in the album title or in the artist name, as noted after rebuilding and reviewing my 15,000+ track library.

Using:

S2.22 2016-01-11
Build: Manic Moose
MPD: 0.19.12 NEWS
Kernel: 3.16-0.bpo.2-486

FYI, this issue is still there, using the latest beta:

S2.23 2016-02-04
Build: Manic Moose
MPD: 0.19.12 NEWS
Kernel: 3.16-0.bpo.2-486

Again, anything with an accent or umlaut character in the artist or album path fails to build album art. To me, it looks like whatever is processing the path recursion to locate audio files and build album art is not UTF-8 compatible.

If you would like sample tracks to reproduce this, please let me know and I will upload/send.

EDIT: I should clarify that this refers to the thumbnails in the Artists view. When selecting an album for playback from the Artists View, the Default View does show the album art.

volpone

  • Jr. Member
  • Posts: 8
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1554 on: 8 Feb 2016, 01:55 pm »
Hi Chris,

Any chance for Roon RAAT to make it back to the BDP firmware any time soon (was removed from the latest beta) or should I go ahead and cancel my subscription?

Thanks,
Carmen

+1
I'am also interested on this topic about BDP / Roon compatibility.

Krutsch

  • Full Member
  • Posts: 568
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1555 on: 8 Feb 2016, 03:29 pm »
Default View is ignoring the Disc Number tags in audio files.

For example: Album contains two discs (or albums), Disc 1 and Disc 2.

Disc 1
 Song 1-1
 Song 1-2
Disc 2
 Song 2-1
 Song 2-2

In the Artists View, this is displayed correctly and songs are added to the playback queue in the correct order.

In the Default View, songs are added by track index, ignoring the disc order:
Song 1-1
Song 2-1
Song 1-2
Song 2-2

Using:

S2.23 2016-02-04
Build: Manic Moose
MPD: 0.19.12 NEWS
Kernel: 3.16-0.bpo.2-486

Thanks.

EDIT: there is a corollary to this issue. With AAC tracks from iTunes, Manic Moose is mis-ordering albums with more than 9 tracks.

For example, Album has 12 tracks, ordered as followed in the Default View:

1
10
11
12
2
...
9

These tracks include track N of M and disc number tags, as well.

From what I can tell, this is limited to tracks that are AAC files from iTunes (my FLAC files don't do this, from what I can tell).

gustavog

  • Jr. Member
  • Posts: 72
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1556 on: 10 Feb 2016, 01:49 pm »
+1
I'am also interested on this topic about BDP / Roon compatibility.

So, finally, what's the road map regarding BDP/Roon compatibility??? It would be nice to have an update from Bryston regarding that...

James Tanner

  • Facilitator
  • Posts: 20448
  • The Demo is Everything!
    • http://www.bryston.com
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1557 on: 10 Feb 2016, 02:11 pm »
So, finally, what's the road map regarding BDP/Roon compatibility??? It would be nice to have an update from Bryston regarding that...

Hi

We have tried it and are still deciding what direction we will take with it going forward.

james'

Krutsch

  • Full Member
  • Posts: 568
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1558 on: 10 Feb 2016, 04:32 pm »
Hi

We have tried it and are still deciding what direction we will take with it going forward.

james'

Well, not that anyone is asking, but I will give you my $0.02. Bryston needs to do *something*. The BDP is a fantastic piece of hardware with an application software problem. Manic Moose isn't making it. MPD apps, like MPaD and MPDroid, do work but present minimum functionality with a learning curve to setup. More importantly, no one is maintaining either app and there aren't really any alternatives. You know how that movie ends.

Roon offers an opportunity for Bryston to get out of the application software business, either by implementing RoonBridge (i.e. an end-point) or by embedding RoonServer (i.e. using the attached storage methodology Bryston loves and presenting it as an all-in-one Roon solution). I am hoping you consider the latter option.

Regards.

gustavog

  • Jr. Member
  • Posts: 72
Re: Manic Moose (S2) - BDP's third major firmware release
« Reply #1559 on: 10 Feb 2016, 05:14 pm »
Well, not that anyone is asking, but I will give you my $0.02. Bryston needs to do *something*. The BDP is a fantastic piece of hardware with an application software problem. Manic Moose isn't making it. MPD apps, like MPaD and MPDroid, do work but present minimum functionality with a learning curve to setup. More importantly, no one is maintaining either app and there aren't really any alternatives. You know how that movie ends.

Roon offers an opportunity for Bryston to get out of the application software business, either by implementing RoonBridge (i.e. an end-point) or by embedding RoonServer (i.e. using the attached storage methodology Bryston loves and presenting it as an all-in-one Roon solution). I am hoping you consider the latter option.

Regards.

My view exactly. I see endless threads about this and that other detail of MM and, in Roon, there is the opportunity for Bryston to embrace a working, rich, and well polished UI and concentrate on the BDP sound.