VMPS 626 supports?

0 Members and 1 Guest are viewing this topic. Read 2032 times.

Hemy

VMPS 626 supports?
« on: 18 Nov 2013, 05:01 pm »
Hello fellow VMPSrs. I am curious if any of you are using 626's as your rear surrounds and if so what you are doing to hang them on the wall.
 :)

John Casler

Re: VMPS 626 supports?
« Reply #1 on: 18 Nov 2013, 09:26 pm »
if you don't mind stuffing a sock in the port and slightly reduced bass try the Hangman System


Hemy

Re: VMPS 626 supports?
« Reply #2 on: 18 Nov 2013, 09:51 pm »
Can't open the link but I think I know what you are talking about. I was actually thinking of something that got it away from the wall about 6 inches or so.


Hemy

Re: VMPS 626 supports?
« Reply #4 on: 19 Nov 2013, 01:08 pm »
Maybe a little extreme...but man that seems really cheap!

srb

Re: VMPS 626 supports?
« Reply #5 on: 19 Nov 2013, 02:38 pm »
If you go with TV brackets you may want trim the ~ 16" wide VESA TV mounting bracket to closer match the ~ 10" width of the 626s.  Of course the 17"W wall mount bracket portion wouldn't be totally hidden, but it would still have a cleaner look if the speaker brackets themselves didn't extend beyond the speaker.

Steve

Hemy

Re: VMPS 626 supports?
« Reply #6 on: 19 Nov 2013, 03:24 pm »
Good notation there Steve....certainly something to think about! The ycertainly look durable enough!!

BobMajor

Re: VMPS 626 supports?
« Reply #7 on: 20 Nov 2013, 12:45 am »
You could mount the speakers horizontally.

srb

Re: VMPS 626 supports?
« Reply #8 on: 20 Nov 2013, 12:58 am »
You could mount the speakers horizontally.

The 626s have ribbons and I'm not sure you can run them horizontally without rotating the ribbons due to what might be extremely limited horizontal dispersion.  ???

Steve

Hemy

Re: VMPS 626 supports?
« Reply #9 on: 27 Dec 2013, 03:34 pm »
How far away from the wall should the speakers be mounted? Maybe I can place some sound dampning material behind the ports to help.

soarertoy

  • Jr. Member
  • Posts: 24
Re: VMPS 626 supports?
« Reply #10 on: 28 Dec 2013, 07:54 am »
I use a simple small TV mount which has single swivel arm underneath the platform, and it is quite adequate for a 626.  Don't recall the brand, but it was bought from a high st department store, so is nothing special. 

Hemy

Re: VMPS 626 supports?
« Reply #11 on: 7 Feb 2014, 03:04 pm »
I am still looking for one more pair of 626r's in Oak if anyone knows of someone looking to sell theirs.