« previous next »
Pages: [1] 2 3 4 5 ... 15   Go Down

If you can build IKEA furniture, these will be a breeze. H Frame Flat Packs

0 Members and 1 Guest are viewing this topic. Read 76834 times.

Outofthewoods

  • Industry Participant
  • Posts: 980
  • Fallen Enclosures, Inc. Crafted with Passion
If you can build IKEA furniture, these will be a breeze. H Frame Flat Packs
« on: 5 Dec 2014, 05:15 am »
Designed to be simple, hassle free and nice to look at. Just glue it up and paint it!

All parts cut from premium 1.25" dual-refined MDF.
Pilot holes for driver screw locations.
Baffles and rear braces are drilled for wire runs.
Bottoms are drilled for spike inserts. (Danny carries the spikes)
1/2" round-over all around.
All parts labeled for easy foolproof assembly.
29"H with a footprint of 18"W x 16"D
Includes (44) 3/8" x 1.50" wood dowels, (4) 18" ratchet bar clamps, (2) ratchet straps, (1) 8 oz. bottle of Titebond wood glue and (1) sheet of 220 sand paper. 
$700 pair, plus shipping.

Any questions?

Thanks,

Ruben













« Last Edit: 24 Jan 2015, 03:49 am by Outofthewoods »
Logged

Captainhemo

Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #1 on: 5 Dec 2014, 05:29 am »
Nice Ruben  :thumb:
Should be a popular  pack

-jay
Logged

mresseguie

  • Full Member
  • Posts: 4714
  • SW1X DAC+ D Sachs 300b + Daedalus Apollos = Heaven
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #2 on: 5 Dec 2014, 08:40 am »
O...M...G... :drool: Those look amazing.  :thumb:

If I had a room to put those in, I wouldn't hesitate.

Is that what all your flatpacks are like? How much wait time for a one-off special order?

Michael


Logged

HAL

  • Industry Contributor
  • Posts: 5198
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #3 on: 5 Dec 2014, 12:19 pm »
Looks like a great kit Ruben!   :thumb:
Logged

gregfisk

  • Restricted
  • Posts: 1349
  • Us alone in the universe? sure is a waste of SPACE
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #4 on: 5 Dec 2014, 03:45 pm »
This is a good idea Ruben, you're right anyone should be able to put these together, and they look great to boot :thumb:
Logged

playntheblues

  • Full Member
  • Posts: 932
  • D-Sonic, Mola Mola TamBagui, Tekton DISE
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #5 on: 5 Dec 2014, 03:51 pm »
Can't wait to get my set   :thumb:
Logged

corndog71

  • Full Member
  • Posts: 1672
  • Some people call me Rob.
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #6 on: 5 Dec 2014, 05:07 pm »
Those look great!  :thumb:

It looks like you forgot the roundover on the woofer holes.
Logged

Outofthewoods

  • Industry Participant
  • Posts: 980
  • Fallen Enclosures, Inc. Crafted with Passion
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #7 on: 5 Dec 2014, 05:24 pm »
Quote from: mresseguie on  5 Dec 2014, 08:40 am
O...M...G... :drool: Those look amazing.  :thumb:

If I had a room to put those in, I wouldn't hesitate.

Is that what all your flatpacks are like? How much wait time for a one-off special order?

Michael

Hi Michael,

Shoot me a PM with what you have in mind. I'm sure I can make it very easy to assemble.

Thanks,

Ruben
Logged

Outofthewoods

  • Industry Participant
  • Posts: 980
  • Fallen Enclosures, Inc. Crafted with Passion
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #8 on: 5 Dec 2014, 05:31 pm »
Quote from: corndog71 on  5 Dec 2014, 05:07 pm
Those look great!  :thumb:

It looks like you forgot the roundover on the woofer holes.

Hey Rob,

Nope, didn't forget 'em. They aren't necessary.

I asked about the round-overs while building the Super 7's and Danny said they were not needed.

However, it's no problem to add the round-overs if requested.

Thanks for bringing it up.

Ruben

Logged

rodge827

Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #9 on: 5 Dec 2014, 06:28 pm »
Very nice!  :D

I'm new to OB bass and have a few questions:

What size are the drivers?
Where can I get the drivers?
What amp to use?
My room is 11'w x 15'l x 8'h will a pair work in my room or is a bigger space needed?
How low will they go?

Chris
Logged

Outofthewoods

  • Industry Participant
  • Posts: 980
  • Fallen Enclosures, Inc. Crafted with Passion
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #10 on: 5 Dec 2014, 06:46 pm »
Hi Rodge,

Quote from: rodge827 on  5 Dec 2014, 06:28 pm
What size are the drivers?

12" This link will take you to the product page. http://gr-research.com/sw-12-16fr.aspx

I will also be offering a similar flat pack for the 8" version of the same driver. http://gr-research.com/sw-12-08-1.aspx

Quote
What amp to use?

http://gr-research.com/a370peq.aspx

Quote
My room is 11'w x 15'l x 8'h will a pair work in my room or is a bigger space needed?

I'll let Danny chime in on this one as he can explain why OB subs perform great in smaller spaces.

Thanks!

Ruben
Logged

Captainhemo

Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #11 on: 5 Dec 2014, 06:56 pm »
Quote from: rodge827 on  5 Dec 2014, 06:28 pm
Very nice!  :D

I'm new to OB bass and have a few questions:

What size are the drivers?
Where can I get the drivers?
What amp to use?
My room is 11'w x 15'l x 8'h will a pair work in my room or is a bigger space needed?
How low will they go?

Chris

Hey Chris,
I can help yo with a few of those questions

Quote
What size are the drivers?
Where can I get the drivers?
What amp to use?

The drivers are 12"  and you can get them herehttp://gr-research.com/sw-12-16fr.aspx
Danny also has an 8 ohm version which I believe is now available that will give you   more outut.
Yu can get the amp  here:
http://gr-research.com/a370peq.aspx

Quote
My room is 11'w x 15'l x 8'h will a pair work in my room or is a bigger space needed?
How low will they go?

They'll work great in your room.   My room is  just slightly bigger at  12.5x18.5  and I have been using a single  H-Frame (2 12's)   for a few months and am just finishing off the 2nd  H-frame. I have no complaints about  the single H-frame on it's own, it is  wonderful.  Clean, tight, and very  detailed, never heard bass like  it before :) The plan has always been  to have  the pair and work each one less .  No lack of output though

The servo controlled  OB 12's will play flat to 20hz  and  -3 db  in the mid teens  I beleive.

HTH

-jay

Ooops, Ruben beatme to   it   !!
Logged

Early B.

Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #12 on: 5 Dec 2014, 07:36 pm »
Quote from: Captainhemo on  5 Dec 2014, 06:56 pm
They'll work great in your room.   My room is  just slightly bigger at  12.5x18.5  and I have been using a single  H-Frame (2 12's)   for a few months and am just finishing off the 2nd  H-frame. I have no complaints about  the single H-frame on it's own, it is  wonderful.  Clean, tight, and very  detailed, never heard bass like  it before :) The plan has always been  to have  the pair and work each one less .  No lack of output though

Please post your results once you have both pairs running.

I have a single W-frame (two 12's) and I'm very interested in reading about your experience with two of them, especially at moderate listening levels. My room size is nearly identical to yours. 
Logged

nrenter

  • Full Member
  • Posts: 408
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #13 on: 5 Dec 2014, 08:11 pm »
The 2 questions that come to mind are...

1. How much to spray a coat of paint on the pieces before shipping?
2. Does a pair of amp boxes come along with the flatpack?
Logged

HAL

  • Industry Contributor
  • Posts: 5198
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #14 on: 5 Dec 2014, 08:22 pm »
Ruben,
How many 8" servo drivers will be in the next flat pack kit?
Logged

Captainhemo

Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #15 on: 5 Dec 2014, 08:46 pm »
Quote from: Early B. on  5 Dec 2014, 07:36 pm
Please post your results once you have both pairs running.

I have a single W-frame (two 12's) and I'm very interested in reading about your experience with two of them, especially at moderate listening levels. My room size is nearly identical to yours.

I'll update my build thread  wehn I've go tthem both up and running  <-- hopefully that will be tomorrow  8)
http://www.audiocircle.com/index.php?topic=127533.0

-jay
Logged

shadowlight

  • Full Member
  • Posts: 1103
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #16 on: 5 Dec 2014, 08:58 pm »
Do you need one amp per woofer or one per h-frame?  Also, the 700/pair is it for 2 h-frame (as shown in the last picture)?
Logged

Outofthewoods

  • Industry Participant
  • Posts: 980
  • Fallen Enclosures, Inc. Crafted with Passion
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #17 on: 5 Dec 2014, 09:02 pm »
Quote from: HAL on  5 Dec 2014, 08:22 pm
Ruben,
How many 8" servo drivers will be in the next flat pack kit?

Hey Rich,

They will come in 2 and 3 woofer configurations. 

Ruben
Logged

Outofthewoods

  • Industry Participant
  • Posts: 980
  • Fallen Enclosures, Inc. Crafted with Passion
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #18 on: 5 Dec 2014, 09:05 pm »
Quote from: nrenter on  5 Dec 2014, 08:11 pm
The 2 questions that come to mind are...

1. How much to spray a coat of paint on the pieces before shipping?
2. Does a pair of amp boxes come along with the flatpack?

Just shipping raw MDF.

Amp box flat packs are not included, but I can include a pair for an additional $50.

Thanks,

Ruben
Logged

HAL

  • Industry Contributor
  • Posts: 5198
Re: If you can build IKEA furniture than these will be a breeze. H Frame Flat Packs
« Reply #19 on: 5 Dec 2014, 09:12 pm »
Hi Ruben,
Ok put me in for a pair of the 3-8" driver kits when they are ready!   :D
Logged
Pages: [1] 2 3 4 5 ... 15   Go Up
« previous next »