I'm at this point right now. I mentioned it on another thread. I tried figuring it out last night and I'm really lost. I look at Dannys pictures and it seems to me the speakOn would fit backwards to what I saw In Dannys picture of it. What I mean is that looking at the connector it appears to me that the four wires (1+, 2+, 1-, 2-), hook to the one side which would point the connector in the opposite direction I think I'm seeing in Danny's picture. Plus, I'm not sure which wire of the four wires that would connect to it is the 1+, 1-, etc. etc.
Also I have the two wires from the crossover that connect to the electra cable connector, but what connects to that connector from the other side? The same wire? Does that then connect to the preamp? If so, where do I get more of that wire? I used up all but about 3 ft of the wire making the network and wiring up the subs.
I have the same issues with the SpeakOn connector. It looks like the four wires from the subs connect to one side but what connects to the other side? Do I need to get a certain type of cable to go to the sub-amp or do I splice the wires on the amp to the other side? Then what are all the cable inputs on the amp for? I'm reading some of the other comments about banana clips, rca's, etc., but how do they connect to the connectors I already have? I'm totally lost.
I sure wish I had a good picture and/or a diagram for possible combinations. I like the connectors that come with the kit. I just don't know exactly how to use them or how to connect everything up to the amps.