PRODUCT DESCRIPTIONThe
HD-Plex Linear Power Supply is a
four rail 100W rated power supply with low ripple noise and is void of high-frequency noise. The unit has independent 19VDC, 12VDC, 9VDC, and 5VDC output and can power four devices simultaneously.
FEATURESHi-end ELNA capacitors
100VA R-Core transformer
Linear Technology LT1083 low dropout positive fixed regulators
Black anodized over brushed aluminum
Blue LED power indicator on the front faceplate
Power on/off switch on the rear faceplate
Overvoltage protection
Overload protection
Overcurrent protection
Short circuit protection
IEC input power connector with built-in EMI filter
OUTPUTS19VDC, 7A max, 5A full load, 3mVp-p ripple
12VDC, 7A max, 5A full load, 2mVp-p ripple
9VDC, 3A max, 2A full load, 2mVp-p ripple
5VDC, 3A max, 2A full load, 2mVp-p ripple
COMPATIBILITY19V/7AMP Output via XLR connector supports thin ITX/NUC/HDPLEX 250W DC-ATX converter
12V/7AMP Output via XLR connector supports PicoPSU or 12V based CE device
9V/2AMP Output supports SoTM PCIe USB card
5V/2AMP Output supports PPA (Paul Professional Audio) USB audio card and Squeezebox
CERTIFICATIONSCE/EN60950-1 (TCT1405072566S-1)
RoHS (TCT1405074557R-1)
FCC (TCT1405074391F-1)
EMC (TCT1405073270E-1)
ACCESSORIES INCLUDED1x XLR---7.4*5.0 w/PIN cable(3ft/1m)
1x XLR---5.5-2.5/2.1mm dual purpose connector cable(3ft/1m)
1x GX16-2---5.5*2.5/2.1mm dual purpose connector cable(3ft/1m) for SoTM USB card external 9V input
1 x GX16-2---4PIN Molex Cable(20cm) connects to 250W Hi-Fi DC-ATX converter inside the HDPLEX Fanless Chassis
1 x XLR---GX16-2 Cable (3ft/1m)
1 x 5.5/2.5mm----4PIN Molex cable (bridge cable for PPA USB card Molex 5V input)
OPTIONSHD-Plex 250W Audiophile DC-ATX Converter
http://www.sales.sonore.us/HD-Plex.html#2 SPECIFICATIONSPower requirements: 120VAC / 220VAC selectable via external switch
Frequency: 50Hz / 60Hz
Idle Power Consumption: < 0.45W
Operating Temperature: -10C - 70C
Dimension: 250mm (L) x 180mm (W) x 70mm (H)
Weight: 5kg / 11 lbs
AVAILABILITYhttp://www.sonore.us