AudioCircle
Audio/Video Gear and Systems => Owner's Circles => Virtue Audio Owners => Topic started by: ammisco11 on 16 Aug 2015, 09:13 pm
-
My Virtue two stopped working no power, light.
I checked the power supply and measured 30 volts.
The fuse is still O.K.
Does the board have a reset switch or something or jumpers?
Any ideas of what t look for?
Thanks It's a great little Amp.
-
I had this happen 2 weeks ago with mine, but it was the fuse. Hard to spot visually, but $5 and a quick run to the hardware store resolved it.
-
The only issue my Virtue has ever had was also the fuse. I've found that Seth gets back to me really fast -- emailing Seth would be my suggestion. I hope that all turns out well.
-
Thanks for the suggestions. The Fuse is O.K. I even replaced it just to be sure and still no luck. I had read some time back about faulty power switches. Anyone know how to test that?
-
please post a pic of the circuit,so we can help you,cant virtue audio help you?
-
I had read some time back about faulty power switches. Anyone know how to test that?
Same as the fuses,set multimeter to beep,if the on state is good it will beep!,if the off state is good it will not beep!,the only thing i can help with if have no schematic is a bad connection from power supply rail down to amp,if you dont have a circuit schematic you're only guessing,that's not good at troubleshooting
MAKE SURE the power is off when you do these test,unplug from mains,remove batteries or else
-
Sorry I haven't checked this for a while. Email me (seth at virtueaudio) and we'll see what we can do.